root-cramfs.img => FS LOAD ERROR <-1> for vmlinuz

Kreuzuebersetzer, Diskussion über Änderungen im Tuxbox-CDK und Tuxbox-CVS
Guschtl
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Dienstag 18. November 2003, 21:08

root-cramfs.img => FS LOAD ERROR <-1> for vmlinuz

Beitrag von Guschtl »

Hallo @ all!

Habe mir aus dem aktuellen CVS ein root-cramfs.img erstellt und auf die Box geflasht (DB2 2xI).

Alle Software-Anforderungen sind erfüllt.
Das Ganze mit SuSE 9.0 unter VMware 3.2.0

-autogen
-configure mit target=flash
-make all
-make flash-neutrino
-make flash-cramfsimage

so weit, so gut :)
Nach dem Flashen und Neustart der Box kommt flogendes :
  • =debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID dd gtxID 0b
    debug: fpID 5a dsID 01-a7.01.2d.07.00.00-be
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0032

    will verify ELF image, start= 0x800000, size= 146964
    verify sig: 262
    Branching to 0x40000


    U-Boot 0.4.0 (TuxBox) (Oct 16 2003 - 18:02:34)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (cramfs) loading 'vmlinuz' to 0x100000
    ### FS LOAD ERROR<-1> for vmlinuz!
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 725515 Bytes = 708.5 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... Bad Data CRC
    =>
stimmt hier etwas mit dem kernel nicht?

Besten Dank für Eure Hilfe!