brauche hilfe - probs beim booten

Kreuzuebersetzer, Diskussion über Änderungen im Tuxbox-CDK und Tuxbox-CVS
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

brauche hilfe - probs beim booten

Beitrag von HELLz »

hallo alle zusammen...

ich hab wirklich schon viel versucht, aber ich bekomme das einfach nicht hin. hier mal kurz ein ausschnitt aus meinem bootlog:

<====
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0000: 0x1514 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0004: 0x5141 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0008: 0x4444 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e000c: 0x5405 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0010: 0x5115 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0014: 0x0551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0018: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e001c: 0x5515 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0020: 0x1555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0024: 0x1444 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600000: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600004: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600008: 0x5554 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0060000c: 0x1155 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600010: 0x5054 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600014: 0x5454 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600018: 0x5055 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0060001c: 0x1105 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600020: 0x5515 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600024: 0x5511 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680000: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680004: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680008: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0068000c: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680010: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680014: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680018: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0068001c: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680020: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680024: 0x5555 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0000: 0x5455 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0004: 0x5550 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0008: 0x5551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c000c: 0x5104 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0010: 0x5145 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0014: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0018: 0x1555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c001c: 0x5554 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0020: 0x5415 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0024: 0x5145 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0000: 0x1554 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0004: 0x0155 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0008: 0x4545 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e000c: 0x4555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0010: 0x5545 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0014: 0x5115 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0018: 0x4555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e001c: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0020: 0x5551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0024: 0x5451 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700000: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700004: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700008: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0070000c: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700010: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700014: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700018: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0070001c: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700020: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700024: 0x5555 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740000: 0x5555 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740004: 0x4551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740008: 0x5445 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0074000c: 0x0444 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740010: 0x4110 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740014: 0x4151 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740018: 0x5551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0074001c: 0x0110 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740020: 0x0551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740024: 0x5111 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0000: 0x5441 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0004: 0x1104 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0008: 0x4455 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a000c: 0x5501 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0010: 0x5504 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0014: 0x0451 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0018: 0x5554 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a001c: 0x4551 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0020: 0x5515 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0024: 0x5440 in
stead
Further such events for this erase block will not be printed
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Chip reports voltage low on erase: status 0xa8
Erase at 0x00740000 failed immediately: errno -5
Starting pid 11, console /dev/console: '/etc/init.d/rcS'
Chip reports voltage low on erase: status 0xa8
Erase at 0x00700000 failed immediately: errno -5
Chip reports voltage low on erase: status 0xa8
Erase at 0x006e0000 failed immediately: errno -5
SIOCADDRT: Network is unreachable
Chip reports voltage low on erase: status 0xa8
Erase at 0x006c0000 failed immediately: errno -5
SR.4 or SR.5 bits set in buffer write (status a. Clearing.
Newly-erased block contained word 0x55555555 at offset 0x00680000
Chip reports voltage low on erase: status 0xa8
Erase at 0x00600000 failed immediately: errno -5
Chip reports voltage low on erase: status 0xa8
Erase at 0x005e0000 failed immediately: errno -5
Chip reports voltage low on erase: status 0xa8
Erase at 0x007a0000 failed immediately: errno -5
Detected STB:
Vendor: Sagem
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.89 2004/02/27 22:17:44 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.44 2003/12/22 05:31:39 obi Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.201 2004/02/01 13:50:23 wjoost Exp $
avia_gt_dmx: loaded ucode vB107
avia_gt_dmx: hw section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.53 2003/12/22 04:02:05 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.25 2004/01/30 08:24:42 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1993)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.30 2004/02/26 23:58:18 carjay Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.198 2004/02/17 19:51:09 wjoost Exp $
Starting pid 71, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.171 2004/02/25 00:28:12 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
Segmentation fault
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.344 2004/02/25 10:45:35 thegoodguy Exp $
$Id: controld.cpp,v 1.115 2004/02/19 23:00:33 zwen Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (4:3 -> 4:3)

====>

das image als solches funktioniert :wink: aber eben diese meldungen im bootlog. ich kriegs einfach nicht gebacken :-?
bin noch ziemlich neu auf dem gebiet. ich hab auch schon gesucht und einiges gefunden, aber nichts schafft abhilfe. könnt ihr mir weiterhelfen?
achso, meine box ist eine dbox2 sagem 1x (war ja klar *g*)

danke
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Re: brauche hilfe - probs beim booten

Beitrag von mash4077 »

HELLz hat geschrieben:Chip reports voltage low on erase: status 0xa8
Hi,

für mich sieht es so aus, als wenn da eine Spannung am Flashbaustein fehlt.
Wann ist Dir das denn aufgefallen? Man macht ja nicht mal eben so ein Log...

Gruß
mash
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

ich hab mich mal dran versucht mir selbst ein jffs2-only-image zu erstellen, was ja auch funktionierte... soweit. beim erstmaligem flashen dachte ich mir halt nur zur kontrolle "lass mal" den bootmanager mitlaufen (geflasht hab ich es per ftp, experten funktion) und da ist mir das dann halt aufgefallen.
===
Chip reports voltage low on erase: status 0xa8
===

dies und auch die andere fehlermeldung gibt er nur bei meinem, diesem image aus.

was kann das sein???
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Beitrag von mash4077 »

Sorry, dann bin ich überfragt. Aber es gibt ja auch noch andere und vor allem wissende hier im Forum... ;-)

Gedult...

Gruß
mash
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

mit der geduld ist das so eine sache, immerhin bastel ich da nu schon ne woche dran rum :wink:
meine frau wird mich auch wohl bald verlassen "... ich muss mal kurz was flashen" (aber mind. 1x in der stunde) :D :lol:
naja, ich werd es wohl aushalten... :wink: ... müssen
HEAD
Einsteiger
Einsteiger
Beiträge: 313
Registriert: Freitag 14. Februar 2003, 15:59

Beitrag von HEAD »

rm Archive/linux-2.4.25-dbox2-mtd.diff.bz2
rm .deps/linuxdir && .deps/linuxkernel

Dann kernel neu backen.
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

hi head...

könntest du es ein wenig genauer bitte? ich bin doch neu in der materie :oops:
was mach ich da überhaupt? damit ich es gleich verstehe...

danke für die mühe
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

wenn ich dich richtig verstanden hab könnte ich auch nach "make download" die "linux-2.4.25-dbox2-mtd.diff.bz2" aus "Archive" löschen (sichern) dann weitermachen, in meinem fall, wie gehabt, mit "make .deps/linuxdir"
da bin ich nämlich gerade...

richtig?
falsch?
HEAD
Einsteiger
Einsteiger
Beiträge: 313
Registriert: Freitag 14. Februar 2003, 15:59

Beitrag von HEAD »

Du baust einfach neu kernel , weil das erste diff (linux-2.4.25-dbox2-mtd.diff.bz2) war nicht OK (für AMD) und leider wird es auch in Archive nicht geupdatet wenn neue Version da ist.

@devs
Wäre nicht besser , das man bei update aus linux-2.4.25-dbox2-mtd.diff.bz2 zB. linux-2.4.25-dbox2-mtd1.diff.bz2 macht ?
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

ich hab es gemacht... aber... was soll das denn bringen? in dem moment wo ich
make .deps/linuxdir
eingebe, lädt er die selbe datei (linux-2.4.25-dbox2-mtd.diff.bz2)
runter und arbeitet weiter, also hier schon keine veränderung.

????
ratlos, ich weiß, ich strotze vor unwissenheit oder was mach ich verkehrt...
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

linux-2.4.25-dbox2-mtd.diff.bz2 war fehlerhaft und wurde ausgetauscht. Einen Unterschied beim "make" wirst du nicht sehen.
There are 10 types of people in the world: those who know binary and those who don't
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

ich hab die ältere und die von heut geöffnet und verglichen und konnte so nix feststellen. ich werds gleich mal durchtesten...

dank erstmal
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

... ich hab es. hat sich erledigt.
JOCKYW2001
Einsteiger
Einsteiger
Beiträge: 358
Registriert: Montag 21. Juli 2003, 23:52

Beitrag von JOCKYW2001 »

Congratulations :)

But I suppose you still have a flawed sectionsd?
Cuz' I saw the segmentation fault in your bootlog:

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.171 2004/02/25 00:28:12 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
Segmentation fault
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

bei mir lag es an der "mkfs.jffs2".
hab sie gegen eine neuere version (v1.39) eingetauscht,
das war es... :wink:

@JOCKYW2001
ich bin des englischen leider nicht so mächtig, nur soviel,
"Segmentation fault"
erscheint immer noch, was heißt das für mich?

thx
JOCKYW2001
Einsteiger
Einsteiger
Beiträge: 358
Registriert: Montag 21. Juli 2003, 23:52

Beitrag von JOCKYW2001 »

There is a problem in sectionsd
HELLz
Neugieriger
Neugieriger
Beiträge: 15
Registriert: Donnerstag 27. März 2003, 20:41

Beitrag von HELLz »

wie kann ich denn diesem problem entgegentreten?

thx
JOCKYW2001
Einsteiger
Einsteiger
Beiträge: 358
Registriert: Montag 21. Juli 2003, 23:52

Beitrag von JOCKYW2001 »

https://tuxbox-cvs.sourceforge.net/foru ... hp?t=29284

Has to be solved by one of the devs. I don't have solution.