Und dann so ein Fehler:
Und zwar bleibt meine box bei loading kernel stehen???
habe hier mal den Bericht:
box2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 200660
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....
.LCD: ready - can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.100
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
Bytes transferred = 7680 (1e00 hex)
ready
FB: find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - try network
ARP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.100
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
Bytes transferred = 43045 (a825 hex)
loading - ready
In: serial
Out: serial
Err: serial
Options:
1: framebuffer on ttyS0
2: framebuffer on fb0
3: framebuffer on null
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
find_inode failed for name=vmlinuz
load: Failed to find inode
### FS LOAD ERROR<0> for vmlinuz!
=>
=> axBaseimageV1.6.10.img
Unknown command 'axBaseimageV1.6.10.img' - try 'help'
=>
------------------------------------------------------------------------
weiter gehts nicht
Bitte um Hilfe
Danke hansmaulwurf