Software auslesen nicht möglich :-(

Anlaufschwierigkeiten? Was ist was? Worum geht's?
A_VeNoM
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Donnerstag 4. März 2004, 16:02

Software auslesen nicht möglich :-(

Beitrag von A_VeNoM »

Hy Leute!

Langsam verzweifle ich...

Ich habe heute meine Nokia Dbox2 wieder von der Reperatur zurückbekommen und gleich mit der Softwareinstallation weiter gemacht...

Nun hänge ich am nächsten Problem, dem "Original Image auslesen"

Eigentlich sieht alles ganz gut aus, bis auf den letzten Satz in der Konsole "Could not open initial Console"

So weit komme ich:

Code: Alles auswählen

ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
  CPU:   PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-44-99-a4
  FLASH:  8 MB
  LCD driver (KS0713) initialized
  No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.89.1.1; our IP address is 10.89.1.5
Filename 'C/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
  LCD logo at: 0x130000 (0x1FD2864 bytes)
  No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.89.1.1; our IP address is 10.89.1.5
Filename 'C/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
done
  FB logo at: 0x0 (0x1FC0000 bytes)
  AVIA Frambuffer
  Input:  serial
  Output: serial

Images:
 1: cdk
 2: yadd
 3: debian
 4: tiab
 5: flash
Select image (1-5), other keys to stop autoboot:  0 
BOOTP broadcast 1
TFTP from server 10.89.1.1; our IP address is 10.89.1.5
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
done
## Booting Linux kernel at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    600241 Bytes = 586 kB = 0 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=10.89.1.1:C/dbox2/cdkroot
/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=10.89.1.1:C/dbox2/cd
kroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:44:99:a4
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 10.89.1.1, my address is 10.89.1.5
IP-Config: Guessing netmask 255.0.0.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 10.89.1.1
Looking up port of RPC 100005/2 on 10.89.1.1
VFS: Mounted root (nfs filesystem).
Warning: unable to mount devfs, err: -2
Freeing unused kernel memory: 64k init
Warning: unable to open an initial console.
Was ist das denn nun wieder für ein Problem? :-(

Hoffe eine von euch kann mir weiterhelfen!

Danke schon im Voraus!

VeNoM :evil: