Probleme bei Flash

[Mally]

Hey alle !

Hilfe mich !

Schau mal bei Bootmaganger!

tdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3a.5c.4b.08.00.00-fa
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Sagem -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: . .
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> boot net
Usage:
bootd - boot default, i.e., run 'bootcmd'

=>

=> ist immer dabei
wie dbox2:root eingeben ?

und D-Box2 Sagam 1x Intel steht Display immer loading Kernel lassen. keine hochladen mehr.

Wer hat schon sie weiss ?

MFG

[KeXXeN]

debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Entweder Problem mit dem Netzwerk

Siehe:

http://www.dietmar-h.net/flashprob.html#boot_net_failed

und / oder

Problem mit dem "Nullmodemkabel"

http://www.dietmar-h.net/Nullmodem.html

[Dietmar]

Image neu flashen.
Wenn das Log vom Versuch ist, siehe Kexxen.

[Mally]

Ich war ja klappt image, aber sowieder probleme !

Dbox 2 1x Intel steht immer dunkel display wie stop.

Ohne NullModem ! mit PPCBoot bei Bootp aktivert
NFS aus
RARP aktivert

vorher !

Code: Alles auswählen

***Adapter Desc: Realtek 8139-series PCI NIC                                                       (Microsoft's Packet Scheduler) 
***MAC address: 00:30:84:29:AA:35 Local IP: 192.168.0.1 (via Packet-Driver #1)
***BootP server started...  Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "logo-lcd"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)

Nachher

Code: Alles auswählen

***Adapter Desc: Realtek 8139-series PCI NIC                                                       (Microsoft's Packet Scheduler) 
***MAC address: 00:30:84:29:AA:35 Local IP: 192.168.0.1 (via Packet-Driver #1)
***BootP server started...  Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:3E:CD:48 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "logo-lcd"
TFTP> Started TFTP-Transfer for "logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
TFTP> Non-BootP TFTP-transfer requested "logo-fb"
TFTP> Started TFTP-Transfer for "logo-fb"...
TFTP> Transfer finished, sent 85 blocks

aber Display steht keine Flashing... sondern nur immer Neutrino loading kernel zeigen lassen. wie ähnlich abstütz ??

und immer letzte zeile FS LOAD error<fffff>.vmlinuz Dbox2 bootloader zeigen

was bedeudet ?

Wie hilft ?

[rmaerte1]

its not possible to read your text correctly, because its no german. please try it in english if you are able.

[Mally]

I a no spreak english and can mini english !

Code: Alles auswählen

ddebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-3a.5c.4b.08.00.00-fa
debug: HWrev 61  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
       Watchdog enabled
Board: DBOX2, Sagem
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:  done.
find_inode failed for name=tuxbox
load: Failed to find inode
LCD:   Scanning JFFS2 FS:  done.
find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
ready
FB:    Scanning JFFS2 FS:  done.
find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash - try network
ARP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
done
Bytes transferred = 43045 (a825 hex)
loading - ready
In:    serial
Out:   serial
Err:   serial

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select (1-3), other keys to stop autoboot:  0 
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<ffffffff> for vmlinuz!
=>

hmm !

Eben funktionen es !

Code: Alles auswählen

ddebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-3a.5c.4b.08.00.00-fa
debug: HWrev 61  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.100
debug: Sending TFTP-request for file C/flashen/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
  CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-3e-cd-48
  FLASH:  8 MB
  FB logo at: none
  Input:  serial
  Output: serial

Any key druecken um das Flashing abzubrechen.. :  0 
  LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
#############################################################################
done
lo: 0x100000unprotecting 1
[0]-> [0] [Sb000b0] unprotecting 2
[0]-> [0] [Sb000b0] unprotecting 3
[0]-> [0] [Sb000b0] unprotecting 4
[0]-> [0] [Sb000b0] unprotecting 5
[0]-> [0] [Sb000b0] unprotecting 6
[0]-> [0] [Sb000b0] unprotecting 7
[0]-> [0] [Sb000b0] unprotecting 8
[0]-> [0] [Sb000b0] unprotecting 9
[0]-> [0] [Sb000b0] unprotecting a
[0]-> [0] [Sb000b0] unprotecting b
[0]-> [0] [Sb000b0] unprotecting c
[0]-> [0] [Sb000b0] unprotecting d
[0]-> [0] [Sb000b0] unprotecting e
[0]-> [0] [Sb000b0] unprotecting f
[0]-> [0] [Sb000b0] unprotecting 10
[0]-> [0] [Sb000b0] unprotecting 11
[0]-> [0] [Sb000b0] unprotecting 12
[0]-> [0] [Sb000b0] unprotecting 13
[0]-> [0] [Sb000b0] unprotecting 14
[0]-> [0] [Sb000b0] unprotecting 15
[0]-> [0] [Sb000b0] unprotecting 16
[0]-> [0] [Sb000b0] unprotecting 17
[0]-> [0] [Sb000b0] unprotecting 18
[0]-> [0] [Sb000b0] unprotecting 19
[0]-> [0] [Sb000b0] unprotecting 1a
[0]-> [0] [Sb000b0] unprotecting 1b
[0]-> [0] [Sb000b0] unprotecting 1c
[0]-> [0] [Sb000b0] unprotecting 1d
[0]-> [0] [Sb000b0] unprotecting 1e
[0]-> [0] [Sb000b0] unprotecting 1f
[0]-> [0] [Sb000b0] unprotecting 20
[0]-> [0] [Sb000b0] unprotecting 21
[0]-> [0] [Sb000b0] unprotecting 22
[0]-> [0] [Sb000b0] unprotecting 23
[0]-> [0] [Sb000b0] unprotecting 24
[0]-> [0] [Sb000b0] unprotecting 25
[0]-> [0] [Sb000b0] unprotecting 26
[0]-> [0] [Sb000b0] unprotecting 27
[0]-> [0] [Sb000b0] unprotecting 28
[0]-> [0] [Sb000b0] unprotecting 29
[0]-> [0] [Sb000b0] unprotecting 2a
[0]-> [0] [Sb000b0] unprotecting 2b
[0]-> [0] [Sb000b0] unprotecting 2c
[0]-> [0] [Sb000b0] unprotecting 2d
[0]-> [0] [Sb000b0] unprotecting 2e
[0]-> [0] [Sb000b0] unprotecting 2f
[0]-> [0] [Sb000b0] unprotecting 30
[0]-> [0] [Sb000b0] unprotecting 31
[0]-> [0] [Sb000b0] unprotecting 32
[0]-> [0] [Sb000b0] unprotecting 33
[0]-> [0] [Sb000b0] unprotecting 34
[0]-> [0] [Sb000b0] unprotecting 35
[0]-> [0] [Sb000b0] unprotecting 36
[0]-> [0] [Sb000b0] unprotecting 37
[0]-> [0] [Sb000b0] unprotecting 38
[0]-> [0] [Sb000b0] unprotecting 39
[0]-> [0] [Sb000b0] unprotecting 3a
[0]-> [0] [Sb000b0] unprotecting 3b
[0]-> [0] [Sb000b0] unprotecting 3c
[0]-> [0] [Sb000b0] unprotecting 3d
[0]-> [0] [Sb000b0] unprotecting 3e
[0]-> [0] [Sb000b0] unprotecting 3f
[0]-> [0] [Sb000b0] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff 
 sector 63 .... done
Erased 63 sectors
Copy to Flash...

[rmaerte1]

CONGRATULATION