Nix geht mehr, bekomme kein Image mehr auf die Box. Es hat sicherlich nix mit dem Image zu tun, allerdings bekomme ich meine Box nicht mehr zum laufen. Hatte ein Komplettimage aufgespielt, die Box fuhr noc runter und dann blieb sie bei "LOADING KERNEL" hängen.
Habe einiges gelesen hier, habe Dietmar Tipps versucht in Sachen Bootmanager, aber ich komme nicht weiter. Vorher ging alles ohne Probleme, hatte mehrfach Images geflasht und auch mit dem Netzwerk keine Probleme.
Vielleicht hat jemand einen Tipp und sollte ich doch etwas übersehen haben, dann sorry. Bin kein Experte.
Log Anfang >>>
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 148088
verify sig: 26
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (Mar 16 2004 - 19:21:44)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<-1> for vmlinuz!
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 602428 Bytes = 588.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=> ebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-84.03.1c.07.00.00-15
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 148088
verify sig: 263
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (Mar 16 2004 - 19:21:44)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<-1> for vmlinuz!
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 602428 Bytes = 588.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=>
Log Ende <<<
Danke,
Jörg
Nokia II Kabel • JtG 0.7.1b • JtG-Team Komplett Image 25.01.2004
avia500v110 • avia600vb022 • ucode_014 (built in) • cam_01_01_004E
