hilfe dringend

Wie blitze ich ein Bild - Permanent Outgoing Incomes
wieland
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Dienstag 25. Mai 2004, 04:39

hilfe dringend

Beitrag von wieland »

nach dem flashn steht nur meher loading kernel bitte um hilfe
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-52.f5.82.07.00.00-ad
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0028

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Nokia -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: .... done.

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
wieland
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Dienstag 25. Mai 2004, 04:39

Beitrag von wieland »

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-52.f5.82.07.00.00-ad
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.102, My IP 192.168.1.100
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_readflash
will verify ELF image, start= 0x800000, size= 207138
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Sep 19 2001 - 20:10:10)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-44-cb-4f
FLASH: 8 MB
Input: serial
Output: serial

anykey druecken um flash auslesen abzubrech 0
BOOTP broadcast 1
Bootp from server 101.114.105.102; our IP address is 0.0.0.0
Sending Flash over UDP
das stht auch noch
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

anykey druecken um flash auslesen abzubrech 0



Egal was Du da machst, es macht irgend wie keinen Sinn.

Im letzten Posting von Dir war die Meldung oben drinne, wolltest Du ein Image auslesen?


Was hast Du überhaubt vor?

Und wie hast Du versucht dieses um zusetzen?


Gruß Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
wieland
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Dienstag 25. Mai 2004, 04:39

Beitrag von wieland »

möchte flashn weil die box bei load kernel nichts meher mach

was ist anykey druecken was mus ich da machen
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Auf "Image flashen" klicken und "boot net failed" beachten.
There are 10 types of people in the world: those who know binary and those who don't
wieland
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Dienstag 25. Mai 2004, 04:39

Beitrag von wieland »

was heist Sending Flash over UDP
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Dass Du nicht auf Image flashen, sonder auf Image auslesen gedrückt hast.
wieland
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Dienstag 25. Mai 2004, 04:39

Beitrag von wieland »

vielen dank funktioniert wieder alles