habe Nokia dBox-2 und habe das neu JTG Komplett Image installiert (vorher ALEXW 1.7.1).
Nun habe ich das Problem, das die Box nicht mehr startet.
Wie kann ich das Image per Serial-Kabel laden?
Wie komme ich auf die Konsole, die DBOX nimmt keine Eingaben entgegen.
Vielen Dank im Vorraus.
Hier Debug-Output:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-41.98.42.07.00.00-6b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/o
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 148088
verify sig: 263
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (May 1 2004 - 09:59:18)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.** ERROR ** boot.conf has dup version (resolve) = 00000014
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
** ERROR ** logo-lcd has dup version (resolve) = 00000016
** ERROR ** logo-fb has dup version (resolve) = 00000015
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
cramfs: wrong magic
### FS LOAD ERROR<-1> for vmlinuz!
## Booting image at 00100000 ...
Bad Magic Number
=>
