Ich habe hier so eine neuere schwarze Kabel Sagem Box auf Linux umrüsten wollen was auch einwandfrei geklappt hat nur leider hängt sich der Transponderscan auf. Nach einspielen der Senderliste aus meiner Kabel Nokia Box zeigt sie mir zwar alle Kanäle in der Liste an aber nix mit Bild oder Ton. Ich habe diverse Yadds und Image (28c - Updateimg 11-17) ausprobiert alle mit dem selben niederschmetternden Ergebnis
Hier mal ein Log des Bootvorgangs:
w2debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-d9.73.3f.08.00.00-bb
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0204
will verify ELF image, start= 0x800000, size= 207425
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Jul 13 2001 - 00:15:59)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-xx-xx-xx-xx <--geändert
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x8265B (0x31C1 bytes)
Input: serial
Output: serial
1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
Kernel image at: 0x10020034 (0x807D7 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:3d:cf:49
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.07.23-21:34+0000) multi-c
all biinsmod: /lib/modules/2.4.2/kernel/drivers/i2c/i2c-core.o: No such file or
directory
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 41
fpREV: 23
DEMOD: AT76C651
Lade soundcore
insmod: /lib/modules/2.4.2/kernel/drivers/sound/soundcore.o: No such file or dir
ectory
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade event
event: init ...
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
write event ...
write event ...
Lade enx_core
enx-core: Loaded AViA eNX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade at76c651
i2c-core.o: driver AT76C651 DVB DECODER registered.
no AT76C651 found, but a AT76C651B
i2c-core.o: driver unregistered: AT76C651 DVB DECODER
AT76C651: not found.
/lib/modules/2.4.2/misc/at76c651.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade enx_dmx
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS
Lade enx_vbi
avia_vbi: version (Jan 1 2002-15:57:07)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Lade enx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Lade enx_capture
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
Lade enx_pig
mkdir: /var/tuxbox/: File exists
mkdir: /var/tuxbox/config: File exists
mkdir: /var/tuxbox/config/zapit: File exists
mkdir: /var/tuxbox/config/elitedvb: File exists
mv: /var/etc/lcdmenu.conf: No such file or directory
mv: /var/neutrino.conf: No such file or directory
mv: /var/controld.conf: No such file or directory
mv: /var/zapit/bouquets.xml: No such file or directory
ln: /var/tuxbox/ucodes: File exists
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
lcd.o: LCD driver (KS0713) module
$Id: lcdmenu.cpp,v 1.12 2001/12/15 12:49:21 obi Exp $
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
Starte neutrino (zapit)
[1] 88
Neutrino HTTP-Server started..
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Controld 0.1
SWITCH LETTER BOX
Zapit $Id: zapit.cpp,v 1.54 2001/12/30 18:38:37 Simplex Exp $
Poll timeout
[zapit] CAID is: 1722
[zapit] scanning a cable section
[zapit] /var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[zapit] channels have been loaded succesfully
[zapit] we have got 83 tv- and 55 radio-channels
$Id: sectionsd.cpp,v 1.87 2001/11/22 13:19:00 field Exp $
caching 120 hours
events are old 60min after their end time
[2] 105
Please press Enter to activate this console. dmxdev: set buffer size 40000 -> 60
000
NeutrinoNG $Id: neutrino.cpp,v 1.114 2001/12/31 16:27:13 McClean Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedzapitmode is default..
Software update enabled
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
dmxdev: set buffer size 40000 -> 60000
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial Black/Regular)
doing network setup...
IP : 192.168.160.21
Netmask : 255.255.255.000
Broadcast: 10.10.10.255
Gateway : 10.10.10.10
init soft-update-stuff
current flash-version: 1.0.13
That was returned: 00t
Changed to TV-mode
All channels received
receiving bouquets...
All bouquets received (0). Receiving channels...
All bouquets-channels received
Cannot open frontend device "/dev/ost/qpskfe0"
CRemoteControl::RemoteControlThread - Nothing could be received from serverd zap
it
: Success
Unknown return-code ><, 0
query epg for onid_tsid >850022< (DISNEY CHANNEL)
dmxdev: set buffer size 40000 -> 60000
query epg for onid_tsid >850022< (DISNEY CHANNEL)
query epg for onid_tsid >850022< (DISNEY CHANNEL)
dmxdev: set buffer size 40000 -> 60000
query epg for onid_tsid >850022< (DISNEY CHANNEL)
query epg for onid_tsid >850022< (DISNEY CHANNEL)
query epg for onid_tsid >850022< (DISNEY CHANNEL)
dmxdev: set buffer size 40000 -> 60000
query epg for onid_tsid >850022< (DISNEY CHANNEL)
query epg for onid_tsid >850022< (DISNEY CHANNEL)
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
irgend jemand eine Idee (die uCode Avia etc wurden schon ausgetauscht ohne Ergebnis)
wie immer
0Ahnung
ich kann es kaum glauben
