Hallo..
Habe bis heute ein Alexw Image vom 22.7.03 drauf gehabt. Lief auch ohne Probs.. Habe heute mal auf ein neues upgedatet auf 200405302356_yadi_squashfs_head_2x.img.Nur bekomme ich damit keine Sender. Auch ein einspielen von Listen brachte nix. Bin wieder zurück aufs alte Image. Jetzt läuft wieder alles.. Was kann ich machen. Habe schon im Forum gesucht aber nix gefunden was mir hilft. Bin auch nicht sooo fit darin. Bin für jede Hilfe dankbar.
Gruß Patrick
Keine Sender nach update...
-
G20
- Neugieriger
- Beiträge: 4
- Registriert: Dienstag 20. Juli 2004, 00:18
-
mash4077
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
G20
- Neugieriger
- Beiträge: 4
- Registriert: Dienstag 20. Juli 2004, 00:18
-
essu
- Tuxboxer
- Beiträge: 2452
- Registriert: Montag 21. Oktober 2002, 10:04
G20 hat geschrieben:Habe nur ein Netzwerkkabel zur Box. Darüber bekomme ich keinen Bootlog oder?
Code: Alles auswählen
telnet:
cat /proc/kmsgSchon gelesen ???
ENIGMA-DOC
ENIGMA-DOC
-
G20
- Neugieriger
- Beiträge: 4
- Registriert: Dienstag 20. Juli 2004, 00:18
Hi.
Hoffe es sind die richtigen Infos....
/var # cat /proc/kmsg
<4>Linux version 2.4.25-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.3) #30 Mo Ju
l 19 00:08:13 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
<4>Decrementer Frequency = 252000000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 66.96 BogoMIPS
<6>Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:17:a2:b8
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<6>D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
<4> Intel/Sharp Extended Query Table at 0x0035
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<6>Using word write method
<5>Creating 7 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00040000 : "flfs (u-boot)"
<5>0x00040000-0x000e0000 : "kernel (jffs2)"
<5>0x000e0000-0x006a0000 : "root (squashfs)"
<5>0x006a0000-0x00800000 : "var (jffs2)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [Power
PC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](
pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter
](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C ad
apter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... GTX
<6>avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<5>avia_gt_core: masking unhandled irq reg 1 bit 11
<5>avia_gt_core: masking unhandled irq reg 1 bit 13
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
.
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (VES1893)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<7>freq=1561750000 ratio=125000 div=30ce pe=0
<5>avia_gt_core: masking unhandled irq reg 0 bit 6
<6>PES, queue 0 normal.
<5>avia_gt_core: masking unhandled irq reg 0 bit 7
Braucht ihr sonst noch irgendwelche infos?
MfG
Patrick
Hoffe es sind die richtigen Infos....
/var # cat /proc/kmsg
<4>Linux version 2.4.25-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.3) #30 Mo Ju
l 19 00:08:13 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
<4>Decrementer Frequency = 252000000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 66.96 BogoMIPS
<6>Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:17:a2:b8
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<6>D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
<4> Intel/Sharp Extended Query Table at 0x0035
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<6>Using word write method
<5>Creating 7 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00040000 : "flfs (u-boot)"
<5>0x00040000-0x000e0000 : "kernel (jffs2)"
<5>0x000e0000-0x006a0000 : "root (squashfs)"
<5>0x006a0000-0x00800000 : "var (jffs2)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [Power
PC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](
pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter
](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C ad
apter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... GTX
<6>avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<5>avia_gt_core: masking unhandled irq reg 1 bit 11
<5>avia_gt_core: masking unhandled irq reg 1 bit 13
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
.
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (VES1893)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<7>freq=1561750000 ratio=125000 div=30ce pe=0
<5>avia_gt_core: masking unhandled irq reg 0 bit 6
<6>PES, queue 0 normal.
<5>avia_gt_core: masking unhandled irq reg 0 bit 7
Braucht ihr sonst noch irgendwelche infos?
MfG
Patrick
-
mash4077
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
G20
- Neugieriger
- Beiträge: 4
- Registriert: Dienstag 20. Juli 2004, 00:18
Hallo.
Habe ich auch mehrmals probiert, hatte nichts gebracht.
Habe dann mal nur zum probieren den LNB gewechselt. Nun findet sie alle Sender...Danach wieder altes LNB dran und nix mehr....Wieder Alexw drauf und alle Sender wieder da.....Habe jetzt das neue LNB mit dem neuen Image am laufen. Aber kann mir dass mal jemand erklären????
MfG
Patrick
Habe ich auch mehrmals probiert, hatte nichts gebracht.
Habe dann mal nur zum probieren den LNB gewechselt. Nun findet sie alle Sender...Danach wieder altes LNB dran und nix mehr....Wieder Alexw drauf und alle Sender wieder da.....Habe jetzt das neue LNB mit dem neuen Image am laufen. Aber kann mir dass mal jemand erklären????
MfG
Patrick
-
morres
- Beiträge: 1
- Registriert: Mittwoch 21. Juli 2004, 11:17
Hallo, ich habe ein ähnliches Problem, des wegen hänge ich meinen Post hier mal an, bevor ich einen neuen aufmache. Auch meine DBox2 (Kabel) Yadi vom 19.7. findet keine Sender. Kann sich bitte mal jemand meine Log-Datei ansehen? Gibt es noch andere relevante Log-Dateien?
Vielen Dank erstmal.
Vielen Dank erstmal.
Code: Alles auswählen
/proc # cat kmsg
<4>Linux version 2.4.25-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.3) #30 Mo Ju
l 19 00:08:13 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
<4>Decrementer Frequency = 252000000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 66.96 BogoMIPS
<6>Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:15:ff:b4
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<6>D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
<4> Intel/Sharp Extended Query Table at 0x0035
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<6>Using word write method
<5>Creating 7 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00040000 : "flfs (u-boot)"
<5>0x00040000-0x000e0000 : "kernel (jffs2)"
<5>0x000e0000-0x006a0000 : "root (squashfs)"
<5>0x006a0000-0x00800000 : "var (jffs2)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [Power
PC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](
pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter
](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C ad
apter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... GTX
<6>avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<5>avia_gt_core: masking unhandled irq reg 1 bit 11
<5>avia_gt_core: masking unhandled irq reg 1 bit 13
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<5>avia_gt_core: masking unhandled irq reg 0 bit 6
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
.
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: VES1820(0): pwm=0x48
<4>DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<5>avia_gt_core: masking unhandled irq reg 0 bit 7
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
/proc #