hi there,
ich hab mühevoll alle faq's gelesen, jedoch kommt bei funktioniert das auslesen des flash nicht. alles endet nach dieser meldung:
-------------------------------------------------------------------------------------
Looking up port of RPC 100003/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using def
-------------------------------------------------------------------------------------
einer ne idee ?
gruss
sAkUrA
Flash auslesen scheitert !?
-
- Neugieriger
- Beiträge: 8
- Registriert: Montag 11. Februar 2002, 00:20
-
- Neugieriger
- Beiträge: 8
- Registriert: Montag 11. Februar 2002, 00:20
ups doch weitergelaufen, aber jetzt...
hängst hier:
dmxdev: set buffer size 40000 -> 60000
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-25.6e.c4.07.00.00-9e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.0.0.15, My IP 192.0.0.1
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot_flash
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-63-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB logo at: 0x8265B (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-flash'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-flash'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-25.6e.c4.07.00.00-9e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.0.0.15, My IP 192.0.0.1
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot_flash
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-63-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB logo at: 0x8265B (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.0.0.15:C/dbox2/cdkroo
t/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.0.0.15:C/dbox2/c
dkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2a:63:d9
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.0.0.15, my address is 192.0.0.1
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.0.0.15 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000007D LR: 00001032 SP: C0231DF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C0231DF0 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C0231D60 00000002 00032724 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02DF150 00100040 00800000 FFFFFFEA C0180000 FFFFFFFF C0160000 00000000
Call backtrace:
C000007D C0008FF0 C000EEB0 C014CD88 C0149818 C0002290 C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000007D LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C1F9FE30 00000002 00032724 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C0230000 C1F9FFD0
Call backtrace:
C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0
C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C C0002E7C
C0002718 C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584
C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C
C0002E7C C0002718 C000F584 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
dmxdev: set buffer size 40000 -> 60000
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-25.6e.c4.07.00.00-9e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.0.0.15, My IP 192.0.0.1
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot_flash
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-63-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB logo at: 0x8265B (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-flash'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-flash'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-25.6e.c4.07.00.00-9e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.0.0.15, My IP 192.0.0.1
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot_flash
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-63-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB logo at: 0x8265B (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.0.0.15; our IP address is 192.0.0.1
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.0.0.15:C/dbox2/cdkroo
t/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.0.0.15:C/dbox2/c
dkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2a:63:d9
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.0.0.15, my address is 192.0.0.1
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.0.0.15
portmap: server 192.0.0.15 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.0.0.15 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000007D LR: 00001032 SP: C0231DF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C0231DF0 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C0231D60 00000002 00032724 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02DF150 00100040 00800000 FFFFFFEA C0180000 FFFFFFFF C0160000 00000000
Call backtrace:
C000007D C0008FF0 C000EEB0 C014CD88 C0149818 C0002290 C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000007D LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C1F9FE30 00000002 00032724 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C0230000 C1F9FFD0
Call backtrace:
C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0
C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C C0002E7C
C0002718 C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584
C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C
C0002E7C C0002718 C000F584 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
-
- Contributor
- Beiträge: 1608
- Registriert: Samstag 28. Juli 2001, 00:00