Sagem 1x Recovery

[Tomal]

Hi

Have a Sagem 1xI Dbox2 which after a power cut has developed a problem as follows:

Apply power
Bmon screen - appears
Lade - appears
autoboot 1 - appears
Loading Kernel - appears and halts at that point forever.

I have a backup (without bootloader) of the image I was using.

any pointers to information of how to re-load this would be appreciated.

Cheers

[DieMade]

Connect the dbox via zero-modem and crossover-cable to your pc.
Start the Bootmanager, in tab "Utilities" klick on "Image flashen", select the Image, power on the dbox.

If you don't hav a zero-modem, see http://www.dietmar-h.net/alt_flash_eng.html

[Tomal]

Thank you for your quick response,

I tried following the instructions from(Flashing without zero-modem) with a new download of both bootmanagerand pccboot and got the following errors

!Couldn't initiate TFTP transfer (possibly file not found)!
!Non-BOOTP TFTP-Transfer requested "\tftpboot\flash.img"!

So I tried the following

Created c:\tftpboot
Copied backup image as flash.img(not 13.img) to that folder
Copied pccboot to that folder

Ran bootmanger and it worked just fine.

No idea why (better knowledge at your end I would believe)

It may help someone else in the future

Thank you again