Hilfe Findet alles nur Premiere nicht!!!
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
Hilfe Findet alles nur Premiere nicht!!!
Hallo ich hoffe jemand kann mir helfen ich habe mir die d box gekauft mit schon installierter linux neutrino software leider kenne ich mich nicht gut aus nun läuft alles bis auf mein premiere er zeigt zwar an was läuft aber er zeigt weder ton noch bild! Auch wenn ich die smart Card raus oder rein schiebe tut sich nichts. Muss ich nur bei den Einstellungen was verändern oder erkennt die box meine karte nicht!!
Gruß Sven
Gruß Sven
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
Beim Starten werden z.B. Imageinformationen angezeigt.
Bezüglich camd2 siehe FAQ-Bereich http://forum.tuxbox-cvs.sourceforge.net ... hp?t=29118
Bezüglich camd2 siehe FAQ-Bereich http://forum.tuxbox-cvs.sourceforge.net ... hp?t=29118
There are 10 types of people in the world: those who know binary and those who don't
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
Hallo!
Hier noch eine schöne Dokumentation
http://wiki.tuxbox-cvs.sourceforge.net/Hauptseite
Gruß Nachtvogel
Hier noch eine schöne Dokumentation

http://wiki.tuxbox-cvs.sourceforge.net/Hauptseite
Gruß Nachtvogel
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
also, ich hab das jetzt alles mal gemacht, allerdings war camd und die ucodes schon drauf.
Allerdings ist immer noch ein schwarzes bild und kann kein Premiere empfangen, woran könnte das jetzt liegen?
Sollte ich vielleicht mal neutrino updaten?
die Neutrino Version ist vom 7/04.
Ich weis nicht mehr weiter.
Allerdings ist immer noch ein schwarzes bild und kann kein Premiere empfangen, woran könnte das jetzt liegen?
Sollte ich vielleicht mal neutrino updaten?
die Neutrino Version ist vom 7/04.
Ich weis nicht mehr weiter.
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
Hi,
Log posten:
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=15918
Gruß
mash
P.S. Welche Karte, welche cam-alpha ?
Log posten:
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=15918
Gruß
mash
P.S. Welche Karte, welche cam-alpha ?
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
hi, also ich hab hier jetzt mal die log:
ab da kommt dann immer nur noch das:.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 610717 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 610653 Bytes = 596.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.26-dbox2 (vom Jtg-Team) (gcc version 3.3.3) #1 Sat Jun 19 11:
02:48 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=cramfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1036k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:15:33:b2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x006a0000 : "root (cramfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'0) multi-
Using /lib/modules/2.4.26-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.26-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.26-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.26-dbox2/misc/avs.o
Using /lib/modules/2.4.26-dbox2/misc/saa7126.o
Using /lib/modules/2.4.26-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.26-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.26-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.26-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.26-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.92 2004/05/31 15:34:34 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.26-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.206 2004/06/04 14:21:00 diemade Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.26-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.26-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.26-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.201 2004/06/04 14:03:01 ghostrider Exp $
Using /lib/modules/2.4.26-dbox2/misc/dvb2eth.o
jtginfo $Id: jtginfo.c,v 1.1 2004/05/31 16:00:30 jtgriker Exp $
$Id: sectionsd.cpp,v 1.176 2004/04/29 09:11:13 metallica Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.354 2004/06/10 19:56:12 rasc Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] ca system id: 1722
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: cam.wrong
[deutsch.locale] superfluous entry: flashupdate.action
[deutsch.locale] superfluous entry: flashupdate.actionwriteflash
[deutsch.locale] missing entry: flashupdate.proxypassword_hint2
[deutsch.locale] superfluous entry: flashupdate.reboot
[deutsch.locale] superfluous entry: infoviewer.cantdecode
[deutsch.locale] superfluous entry: mainsettings.plugins
[deutsch.locale] superfluous entry: mainsettings.scan
[deutsch.locale] superfluous entry: miscsettings.boxtype
[deutsch.locale] superfluous entry: parentallock.onstart
[deutsch.locale] superfluous entry: recordingmenu.vcr_devicename
[deutsch.locale] superfluous entry: satsetup.extended_lnb
[deutsch.locale] superfluous entry: scants.services
[deutsch.locale] superfluous entry: streamfeatures.info
[deutsch.locale] superfluous entry: streaminfo.ecm_invalid
[deutsch.locale] superfluous entry: streaminfo.not_crypted
[deutsch.locale] superfluous entry: timerlist.empty
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: 769
[neutrino] registering as event client
[controld] setting VideoFormat to auto
SPTS, queue 0 extended.
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 528x576 (4:3 -> 4:3)
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
hoffe ihr könnt mir helfen.[sectionsd] getUTC: read: Connection timed out
-
- Tuxboxer
- Beiträge: 2634
- Registriert: Samstag 15. November 2003, 09:00
Pass mal auf, mach mal folgendes:
Zuerst poste mal die Version deiner Cam.alpha.bin
Dazu auf DBox -> Service -> Ucodes...
Dann folgende Anleitung:
1. Box im jetzigen Zustand sichern.
Tasten = DBox -> Service -> Software aktualisierung -> Expertenfunktion -> Einzelne Partition auslesen -> Flash without bootloader
Die Datei die dann im tmp erstellt wird kopierst du bitte mit einem FTP Programm auf deinen Rechner.
2. Ucodes sichern
Mit einem FTP alle Ucodes sichern die sich auf deiner Box befinden.
3. Image updaten
Infos dazu hier:
http://www.jackthegrabber.de/viewtopic.php?t=1974
Am einfachsten du packst das Image auf deine Box ins Verzeichniss tmp und machst dann folgendes:
Tasten = DBox -> Service -> Software aktualisierung -> Expertenfunktion -> Einzelne Partition einspielen -> Flash without bootloader
die datei aus dem Tmp Verzeichniss auswählen.
Dann alles weitere nach Anleitung auf dem Bildschirm, nach neustart und einspielen der Ucodes kannst du
4. den letzten Snapshot einspielen.
dazu snapshot.cramfs in tmp kopieren und über Software aktualisieren (manuell) updaten.
Wenn das auch fertig ist und alles soweit geht. Kommen wir zu
5. Premieresupport.
Dazu diese Anleitung befolgen:
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=29118
Achtung! Anleitung befolgen nicht interpretieren.
var/bin ist nicht bin
In dem Image ist noch keine camd2 in dem Verzeichniss. Ist schon eine drinnen, ists das Falsche.
Dann neu booten.
6. Kanalsuche
7. Premiere Karte raus und rein
8. Wenns nicht geht, Bootlog laufen lassen und zwischen ein paar Premierekanälen umschalten... dann posten.
Zuerst poste mal die Version deiner Cam.alpha.bin
Dazu auf DBox -> Service -> Ucodes...
Dann folgende Anleitung:
1. Box im jetzigen Zustand sichern.
Tasten = DBox -> Service -> Software aktualisierung -> Expertenfunktion -> Einzelne Partition auslesen -> Flash without bootloader
Die Datei die dann im tmp erstellt wird kopierst du bitte mit einem FTP Programm auf deinen Rechner.
2. Ucodes sichern
Mit einem FTP alle Ucodes sichern die sich auf deiner Box befinden.
3. Image updaten
Zuerst das letzte JTG-Team Komplett Image flashen.jtginfo $Id: jtginfo.c,v 1.1 2004/05/31 16:00:30 jtgriker Exp $
Infos dazu hier:
http://www.jackthegrabber.de/viewtopic.php?t=1974
Am einfachsten du packst das Image auf deine Box ins Verzeichniss tmp und machst dann folgendes:
Tasten = DBox -> Service -> Software aktualisierung -> Expertenfunktion -> Einzelne Partition einspielen -> Flash without bootloader
die datei aus dem Tmp Verzeichniss auswählen.
Dann alles weitere nach Anleitung auf dem Bildschirm, nach neustart und einspielen der Ucodes kannst du
4. den letzten Snapshot einspielen.
dazu snapshot.cramfs in tmp kopieren und über Software aktualisieren (manuell) updaten.
Wenn das auch fertig ist und alles soweit geht. Kommen wir zu
5. Premieresupport.
Dazu diese Anleitung befolgen:
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=29118
Achtung! Anleitung befolgen nicht interpretieren.
var/bin ist nicht bin
In dem Image ist noch keine camd2 in dem Verzeichniss. Ist schon eine drinnen, ists das Falsche.
Dann neu booten.
6. Kanalsuche
7. Premiere Karte raus und rein
8. Wenns nicht geht, Bootlog laufen lassen und zwischen ein paar Premierekanälen umschalten... dann posten.
Zu Fragen oder Nebenwirkungen der hier genannten Begriffe benutzen sie bitte die Suchfunktion oder konsultieren sie die [url=https://tuxbox.org/forum/viewforum.php?f=26&] Frequentliy Asked Questions[/quote].
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
Hallo!
Im JtG Forum http://www.jackthegrabber.de/viewtopic.php?t=1974 findest Du einen Link "Snapshot"
dahinter verbirgt sich der snapshot.cramfs
Gruß Nachtvogel
Im JtG Forum http://www.jackthegrabber.de/viewtopic.php?t=1974 findest Du einen Link "Snapshot"
dahinter verbirgt sich der snapshot.cramfs
Gruß Nachtvogel
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
ich hab wohl was falsches geflasht, jetzt kommt "kein system" was kann ich jetzt am besten machen?
Ich hab schon alles mögliche probiert ein neues zu flashen mit bootmanager etc... geht aber nicht... wie finde ich denn die IP von der DBOX so raus?
ich weis nimmer was ich machen soll... bin schon kurz davor die scheiss box zurückzuschicken, weil ich kein system mehr druf bekomme
Ich hab schon alles mögliche probiert ein neues zu flashen mit bootmanager etc... geht aber nicht... wie finde ich denn die IP von der DBOX so raus?
ich weis nimmer was ich machen soll... bin schon kurz davor die scheiss box zurückzuschicken, weil ich kein system mehr druf bekomme

-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
ja, auf die idee bin ich auch schon gekommen, und habs natürlich auch schon probiert, aber bei mir geht es nur soweit:
und komme nicht weiter
Und der abschnitt wiederholt sich dann die ganze zeit:½debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.182, My IP 192.168.0.202
debug: Sending TFTP-request for file F/ppcboot28835/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-15-33-b2
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename 'F/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename 'F/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected
dbox2-ppcboot> bootp 120000 /tftpboot/flash.img
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *###########################################T #T ####################################################T #################################T ######################################################################################T ##############################################T ###########################################################T #################################################################T #############T ###################################################################################################################################################
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *###############################################################################T ###############################################################################################T ########################################################T #########################################################################################################################################T ###############################################################################T ################################T ##########T ############################################################################################################T ######################################################################T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *######################T ###################################################################################################################################################################################################################################################################################################################################################T #####################T #########################################T ######################################################################################
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.182
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Microsoft Windows XP Professional Service Pack 1 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
und daran sitz ich eben schon die ganze zeit :-/Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *###############################################################################T ###############################################################################################T ########################################################T #########################################################################################################################################T ###############################################################################T ################################T ##########T ############################################################################################################T ######################################################################T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading:
und komme nicht weiter

-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
Nachtvogel hat geschrieben:http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent

Brichst Du jetzt unter gurgels "Druck" ein?

Gruß
mash
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Neugieriger
- Beiträge: 18
- Registriert: Freitag 14. Januar 2005, 20:22
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
Irgendwas in Deinem Netzwerk bockt rum und deshalb gibt es die Timeouts beim Flashen. Schau mal hier im Board, es gibt auch eine ppcboot, die mehr als 10 timeouts beim laden vom Image akzeptiert (Methode ohne Nullmodem dann aber verwenden).
Da isse ja: http://www.noernet.de/dbox2/old_flash/p ... _99999.bz2
Da isse ja: http://www.noernet.de/dbox2/old_flash/p ... _99999.bz2
There are 10 types of people in the world: those who know binary and those who don't