lädt er ja die "Filename 'F/tftpboot/logo-fb'." korrekt hoch, aber immer bei der flash.img bleibt er hängen... ich weis nicht wieso.½debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.182, My IP 192.168.0.202
debug: Sending TFTP-request for file F/ppcboot80216/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-15-33-b2
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename 'F/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename 'F/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected
dbox2-ppcboot> bootp 120000 /tftpboot/flash.img
BOOTP broadcast 1
TFTP from server 192.168.0.182; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *##########################################################################################################################T ##T ###############################################T #############################################################################################################################################T #################################################################################T ####################################T #########################################################################################################################T ####################################################################################################################################################################################T ############################T ##############################################################################################################################################
Retry count exceeded; starting again
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.182
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Microsoft Windows XP Professional Service Pack 1 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
Habs jetzt schon mit dem AlexW2ximage probiert, und mit dem "jtg neutrino" bleibt eigentlich immer da stehen... ich weis nicht wieso... :-/