DBox2 Sagem mit Bild und Ton Störungen
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
so und hier der neue log
Read /disclaimer.txt and have fun with yadi on your Sagem D-BOX2 - Kernel 2.4.27
-dbox2 (18:21:37)...
dbox login: root
BusyBox v1.00 (2004.10.26-20:00+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cat /proc/kmsg
<4>Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Di Okt
26 22:40:18 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
<4>Decrementer Frequency = 247500000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 65.74 BogoMIPS
<6>Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3c:f7:03
<6>loop: loaded (max 8 devices)
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<4>CFI: Found no D-Box 2 flash memory device at location zero
<6>D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
<4> Intel/Sharp Extended Query Table at 0x0031
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x20000,blocks=64
<6>Using buffer write method
<5>Creating 6 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00680000 : "root (squashfs)"
<5>0x00680000-0x007e0000 : "var (jffs2)"
<5>0x007e0000-0x00800000 : "flfs (u-boot)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [Power
PC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter
](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C ad
apter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... eNX
<6>avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
.
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
Read /disclaimer.txt and have fun with yadi on your Sagem D-BOX2 - Kernel 2.4.27
-dbox2 (18:21:37)...
dbox login: root
BusyBox v1.00 (2004.10.26-20:00+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cat /proc/kmsg
<4>Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Di Okt
26 22:40:18 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
<4>Decrementer Frequency = 247500000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 65.74 BogoMIPS
<6>Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3c:f7:03
<6>loop: loaded (max 8 devices)
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<4>CFI: Found no D-Box 2 flash memory device at location zero
<6>D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
<4> Intel/Sharp Extended Query Table at 0x0031
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x20000,blocks=64
<6>Using buffer write method
<5>Creating 6 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00680000 : "root (squashfs)"
<5>0x00680000-0x007e0000 : "var (jffs2)"
<5>0x007e0000-0x00800000 : "flfs (u-boot)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [Power
PC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](
pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter
](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C ad
apter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... eNX
<6>avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
.
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
Moin,
so leider geht die box wieder nicht.
hab sie angeschlossen da ging alles ca 1 std. gelaufen dann deepstandbye
und ne halbe std. später wieder an und es ging von vorne los bild und ton flakern.
ich guck mal nachher nochmal nach den log ob der jetzt dann ander es ist als der andere.
aber was kann das noch sein dann ?
achso was mir noch eingefallen ist,
ich habe die box dann an meine kabelangeschlossen den sendersuchlauf gemacht und sie dann laufen lassen und dann erst ausgemacht, also vermute ich mal das nachdem ersten anmachen und suchen sie geht aber dann wenn man sie aus und wieder anmacht dann der sendersuchlauf etwas durcheinander kommt bzw. die sender nicht richtig gespeichert sind ?
kann das sein ?
so leider geht die box wieder nicht.
hab sie angeschlossen da ging alles ca 1 std. gelaufen dann deepstandbye
und ne halbe std. später wieder an und es ging von vorne los bild und ton flakern.
ich guck mal nachher nochmal nach den log ob der jetzt dann ander es ist als der andere.
aber was kann das noch sein dann ?
achso was mir noch eingefallen ist,
ich habe die box dann an meine kabelangeschlossen den sendersuchlauf gemacht und sie dann laufen lassen und dann erst ausgemacht, also vermute ich mal das nachdem ersten anmachen und suchen sie geht aber dann wenn man sie aus und wieder anmacht dann der sendersuchlauf etwas durcheinander kommt bzw. die sender nicht richtig gespeichert sind ?
kann das sein ?
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
Moin @all
so ich hab jetzt ein com log der sieht so aus
rror while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal
zapit shot down
Waiting for controld (max. 9 seconds)
Starting pid 145, console /dev/console: '/bin/switch'
Cdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-75.fd.09.08.00.00-b2
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 158620
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (Oct 26 2004 - 21:58:41)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 626379 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626315 Bytes = 611.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Di Okt 26
22:40:18 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3c:f7:03
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Sagem
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/at76c651.o
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.5 2004/08/21 09:05:31 mogway Exp $
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Yadi Snapshot vom 26.10.2004 21:11 - Image-Version 2.0.0.1
Networkcfg eth0: 192.168.1.3/255.255.255.0 gw 192.168.1.1
Startmode: Bootmenu - SPTS:off - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 91, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.179 2004/09/10 11:36:00 thegoodguy Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.356 2004/08/02 08:09:44 thegoodguy Exp $
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] missing entry: movieplayer.pesplayback
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
zap failed!
[sectionsd] getUTC: read: Connection timed out
so wer kann da vielleicht einen fehler entdecken wegen meinen ton und bild ausfall
achso der kabelanschluß 100% weil die andere box ja geht mit karte
thx schon mal
so ich hab jetzt ein com log der sieht so aus
rror while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal
zapit shot down

Waiting for controld (max. 9 seconds)
Starting pid 145, console /dev/console: '/bin/switch'
Cdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-75.fd.09.08.00.00-b2
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 158620
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (Oct 26 2004 - 21:58:41)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 626379 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626315 Bytes = 611.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Di Okt 26
22:40:18 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3c:f7:03
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Sagem
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/at76c651.o
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.5 2004/08/21 09:05:31 mogway Exp $
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Yadi Snapshot vom 26.10.2004 21:11 - Image-Version 2.0.0.1
Networkcfg eth0: 192.168.1.3/255.255.255.0 gw 192.168.1.1
Startmode: Bootmenu - SPTS:off - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 91, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.179 2004/09/10 11:36:00 thegoodguy Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.356 2004/08/02 08:09:44 thegoodguy Exp $
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] missing entry: movieplayer.pesplayback
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
zap failed!
[sectionsd] getUTC: read: Connection timed out
so wer kann da vielleicht einen fehler entdecken wegen meinen ton und bild ausfall
achso der kabelanschluß 100% weil die andere box ja geht mit karte
thx schon mal
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19
Bis dahin passt alles zusammen und sieht i.O. aus._dragon_ hat geschrieben: Detected STB:
Vendor: Sagem
Model: D-BOX2
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
Das ist jetzt nicht mehr i.O._dragon_ hat geschrieben: zap failed!
[sectionsd] getUTC: read: Connection timed out
Wenn das immer nach einer längeren Betriebszeit auftritt, dann dürfte das wohl ein Hardwaredefekt sein.
Gruß
mash
-
- Interessierter
- Beiträge: 26
- Registriert: Sonntag 30. Januar 2005, 08:52
-
- Tuxboxer
- Beiträge: 4654
- Registriert: Samstag 27. April 2002, 13:19