Erstmal sorry, ich werd hier wie viele andre, vermutlich kein Vollzeitmitglied, ich hab nur ein Problem und versuche mich so kurz und technisch zu fassen wie es möglich ist
Ja, ich habe die Suchfunktionen diverser Foren seit über einer Woche bemüht, aber leider ohne den Erfolg, den ich erhoffte. Nun muss ich leider posten und hoffe, ich hab nichts übersehen und geh euch nicht allzu sehr auf die Neven.
Folgendes Problem:
Freischaltung der Premiere Karte funktioniert nicht mehr (vermute ich)
Die aktuelle Hard und Software:
Nokia DBox2 mit 500er Chip 2xIntel für Kabel (also eine der frühen)
gültiges Premiere Voll Abo
Premiere Karte K02 (blau)
Image 200505261551_neutrino_yadi_squashfs_head_2x
avia500v110
avia600vb022 (hilft nichts und schadet hoffentlich auch nicht)
ucode_B107
cam_01_01_005D
camd2 von Kern in /var/bin die exec. Rechte hat Yadi beim booten erledigt
Das ist die Vorgeschichte:
-BN hat mit Jugendschutz genervt
-alexW Image drauf (ist über 1,5 Jahre her)
-lief wunderbar, bis meine Hausverwaltung meinte Kabel ist zu teuer
-Gemeinschaftssatanlage her
-die Inhouseverkabelung ist weiterhin auf Kabelanschluss ausgelegt
-die Dbox hat daraufhin keine Sender mehr gefunden da kein cabel bruteforce im Image und die üblichen Kabelkanal Listen funktionieren nicht
mehr, da irgendwo eine Art Umsetzer im Haus ist, der die Satkanäle auf
irgendwelche Kabelfequenzen umleg, keine Ahnung wie, bin kein Fernsehfachmann
-ich also auf Yadi gestossen und drauf das Image, vorher ucodes gespeichert
-dann lief Premiere wieder, aber leider nur für ca. 4 Wochen, bis vor einer Woche die Keys geändert wurden, oder irgend ein Timer auf der Karte auslief, keine Ahnung. Seitdem ist es dunkel und ich hab gelesen, probiert und verschiedene ucodes, cam-alphas und camd's versucht, von Premiere zweimal freischalten lassen, aber alles nützt nichts. Die Karte bekommt das Freischaltsignal nicht. Alternativ camd2 probiert und "Kanal oder Zeit ist nicht freigeschalten"
So, jetzt zur Frage:
Kann es sein das Premiere über Sat andere Freischalt Keys/Signale sendet als über Kabel? Brauch ich jetzt ne P02 Karte???
Hier noch mein Bootlog für die Profis, mit einigen Umschaltern am Ende:
/ # zapit shot down
Waiting for controld (max. 9 seconds)
Starting pid 148, console /dev/console: '/bin/switch'
CXA2092 found
The system is going down NOW !![nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
|debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 638456 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 638392 Bytes = 623.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Do Mai 26
17:25:49 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30880k available (1088k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:13:35:f3
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Thu Jan 1 01:00:00 CET 1970
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Yadi Snapshot vom 26.05.2005 15:51 - Image-Version 2.1.0.3
Networkcfg eth0: 192.168.100.10/255.255.255.0 gw 192.168.100.1
Startmode: Bootmenu - HWS:off
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 93, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.184 2005/05/
02 19:06:35 rasc Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.371 2005/04/17 06:56:15 metallica Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/antiservices.xml: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[camd] set emm caid 1722 capid 1502
PES, queue 0 normal.
[camd] starting onid 0001 sid 0008
[camd] set emm caid 1722 capid 1502
[neutrino] initialized everything
descramble onid: 0001 sid: 0008 status: 5050
[timeThread] time(): 17.06.2005 15:19:13, tim: Fri Jun 17 15:19:13 2005
[timeThread] time(): 17.06.2005 15:19:23, tim: Fri Jun 17 15:19:23 2005
[frontend.cpp:setFrontend:190] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
[frontend.cpp:setFrontend:190] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[frontend.cpp:setFrontend:190] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
[frontend.cpp:setFrontend:190] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
[camd] set emm caid 1722 capid 1502
PES, queue 0 normal.
[camd] starting onid 0001 sid 0008
[camd] set emm caid 1722 capid 1502
descramble onid: 0001 sid: 0008 status: 5050
PES, queue 0 normal.
[camd] starting onid 0001 sid 000a
descramble onid: 0001 sid: 000a status: 5050
PES, queue 0 normal.
[camd] starting onid 0001 sid 000b
descramble onid: 0001 sid: 000b status: 5050
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[timeThread] time(): 17.06.2005 15:49:27, tim: Fri Jun 17 15:49:27 2005
PCR discontinuity: PCR: 0x0066A4351, OLDPCR: 0x00668CA49, Diff: 96520
PCR discontinuity: PCR: 0x006B785F5, OLDPCR: 0x006B3BFEA, Diff: 247307
PCR discontinuity: PCR: 0x006BB6662, OLDPCR: 0x006B9A29A, Diff: 115656
PCR discontinuity: PCR: 0x006C427D2, OLDPCR: 0x006C3402A, Diff: 59304
PCR discontinuity: PCR: 0x006ECD269, OLDPCR: 0x006E8E545, Diff: 257316
PCR discontinuity: PCR: 0x006F1F719, OLDPCR: 0x006EF098A, Diff: 191887
PCR discontinuity: PCR: 0x006F748F7, OLDPCR: 0x006F2C450, Diff: 296103
PCR discontinuity: PCR: 0x007012597, OLDPCR: 0x006F7EE75, Diff: 603938
PCR discontinuity: PCR: 0x00717B038, OLDPCR: 0x0070279C7, Diff: 1390193
PCR discontinuity: PCR: 0x007226120, OLDPCR: 0x007180775, Diff: 678315
PCR discontinuity: PCR: 0x00728B846, OLDPCR: 0x00722B2A5, Diff: 394657
PCR discontinuity: PCR: 0x0073977B1, OLDPCR: 0x007389AF5, Diff: 56508
PCR discontinuity: PCR: 0x0073D1CC5, OLDPCR: 0x0073A5564, Diff: 182113
PCR discontinuity: PCR: 0x007555683, OLDPCR: 0x00744610B, Diff: 1111416
PCR discontinuity: PCR: 0x0081D3E5E, OLDPCR: 0x0081BD976, Diff: 91368
PCR discontinuity: PCR: 0x008580C30, OLDPCR: 0x00856493A, Diff: 115446
PCR discontinuity: PCR: 0x0085A9926, OLDPCR: 0x008588211, Diff: 136981
PCR discontinuity: PCR: 0x0085D8A65, OLDPCR: 0x0085CD168, Diff: 47357
PCR discontinuity: PCR: 0x00860CC5F, OLDPCR: 0x0085DFAFA, Diff: 184677
PCR discontinuity: PCR: 0x00D814323, OLDPCR: 0x00861A37D, Diff: 85958566
[camd] no card is in slot #2
[camd] no card is in slot #1
descramble onid: 0001 sid: 0008 status: 8080
descramble onid: 0001 sid: 000a status: 8080
descramble onid: 0001 sid: 000b status: 8080
[camd] card_country:
[camd] card_number:
[camd] card_version: ffff
PCR discontinuity: PCR: 0x00D8B4DF7, OLDPCR: 0x00D81957A, Diff: 637053
[camd] ca system id: 1722
[camd] card_country: TEL
[camd] card_number: 0265199961
[camd] card_version: 0384
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
descramble onid: 0001 sid: 000a status: 5050
descramble onid: 0001 sid: 0008 status: 5050
descramble onid: 0001 sid: 000b status: 5050
[timeThread] time(): 17.06.2005 16:19:32, tim: Fri Jun 17 16:19:32 2005
Mich irritiert dieses, no Card in slot 1! Das passiert wenn ich die Karte ziehe und wieder stecke, also nach dem stecken kommt das Log! Versteh ich nicht???
Fragen, Anregungen, Tips?
Premiere stellt sich natürlich dumm, da sie anhand meiner Antworten Wind bekommen haben das ich nicht mehr die BN Software drauf hab.
Vielen Dank schonmal im Voraus!
