Samba Konfiguration auf Eisfair

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Forumsregeln
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Samba Konfiguration auf Eisfair

Beitrag von Troubleshooter »

Hi,

bei der Installation des Samba auf Eisfair trat bei mir folgendes Problem auf: Wenn ich in der Netzwerkumgebung den Server wähle, erscheint nach einiger Wartezeit die Meldung "Auf \\eis kann nicht zugegriffen werden. Sie haben eventuell keine Berechtigung, diese Netzwerkressource zu verwenden"

Bei der Installation bin ich nach der Eisfair-Anleitung vorgegangen, d.h. ich habe die manuelle Konfiguration auf no gelassen, da mir die automatische genügt. Der Name der Arbeitsgruppe entspricht dem der Windows-Rechner. Die Windows-User wurden als Eisfair-User angelegt und in Samba übernommen. Login per SSH funktioniert problemlos.

Kennt jemand dieses Problem? Habe auch schon im Wiki nachgelesen, aber wie gesagt genügt mir die auto-Konfiguration. In der Suchfunktion ist ebenfalls nichts zu finden. Ich hab den Eindruck, bei jedem anderen funktionierts, wenn er strikt nach Anleitung vorgeht :(

Troubleshooter
Nach oben
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

Hi,

wenn Dein "Nameserver" den \\eis net auflösen kann, könnte es zur Deiner Fehlermeldung kommen.

Gib mal im Explorer auf Netzwerkumgebung --> rechte Maustaste --> Computer suchen --> ip-des-eis eingeben --> suchen


Wenn er ihn findet, doppelklick --> authorisieren

Wenn Du anschliessend auf dem Freigabeordner, rechte Maustaste. Laufwerksverknüpfung erstellen, beim start wiederherstellen anklickst, brauchste den net immer wieder suchen.



Gruß
Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

Frockert hat geschrieben:Hi,

wenn Dein "Nameserver" den \\eis net auflösen kann, könnte es zur Deiner Fehlermeldung kommen.

Gib mal im Explorer auf Netzwerkumgebung --> rechte Maustaste --> Computer suchen --> ip-des-eis eingeben --> suchen


Wenn er ihn findet, doppelklick --> authorisieren

Wenn Du anschliessend auf dem Freigabeordner, rechte Maustaste. Laufwerksverknüpfung erstellen, beim start wiederherstellen anklickst, brauchste den net immer wieder suchen.



Gruß
Frockert
Hi,

schon mal danke für die Antwort. Ich habe den Eis über Computer suchen-> Eis im Netzwerk gefunden, das müsste doch eigentlich bedeuten, dass der Name bekannt ist? Wenn ich auf den gefundenen Eintrag doppelklicke, kommt obengennante Fehlermeldung...

Aber trotzdem vielen Dank, ich probiers am Wochenende mal aus...

Troubleshooter
Nach oben
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

Ok,


Du schreibst windows-user und samba-user sind gleich (gros/kleinschrift?)...sind die passwörter auch gleich?

Wenn Du die beiden Anmeldenamen absolut gleich hast, aber unterschiedliche Passwörter...dannn versucht er sich mit dem eingetragenen windows-passwort am samba zu authorisieren --> das schlägt fehl.



Gruß
Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

Frockert hat geschrieben:Ok,


Du schreibst windows-user und samba-user sind gleich (gros/kleinschrift?)...sind die passwörter auch gleich?

Wenn Du die beiden Anmeldenamen absolut gleich hast, aber unterschiedliche Passwörter...dannn versucht er sich mit dem eingetragenen windows-passwort am samba zu authorisieren --> das schlägt fehl.



Gruß
Frockert
Passwörter sind auch gleich.

Habs nun auch mal mit nem Windows2000-Client probiert -> selbes Ergebnis: Der Eis taucht in der Netzwerkumgebung auf, aber wenn man ihn auswählt, erscheint

Win2000: Auf \\Eis kann nicht zugegriffen werden. Der Netzwerkpfad wurde nicht gefunden

WinXP:Auf \\Eis kann nicht zugegriffen werden. Sie haben eventuell keine Berechtigung, ....


???
Nach oben
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

Hi,


stelle mal in der samba-config den Debuglevel auf 3, samba neu starten.
Dann die aktuellen Ausgaben nach der Zugriffscheiterung aus den /var/log/log.smbd und /var/log/log.nmbd posten.


...
SAMBA_DEBUGLEVEL='0' # For debugging only: 0-3
# You will find debug messages in
# /var/log/log.smbd, /var/log/log.nmbd
...



Gruß
Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

Hi,

ich hab die Logs geleert, Samba neugestartet und dann den Eis gesucht und doppelgeklickt, was wieder zur Fehlermeldung führte. Hier die Logs:

Code: Alles auswählen

[2006/11/18 16:29:55, 0] nmbd/nmbd.c:main(699)
  Netbios nameserver version 3.0.23c-for-eisfair-2 started.
  Copyright Andrew Tridgell and the Samba Team 1992-2006
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:reload_nmbd_services(263)
  services not loaded
[2006/11/18 16:29:55, 2] nmbd/nmbd.c:main(723)
  Becoming a daemon.
[2006/11/18 16:29:55, 2] lib/tallocmsg.c:register_msg_pool_usage(61)
  Registered MSG_REQ_POOL_USAGE
[2006/11/18 16:29:55, 2] lib/dmallocmsg.c:register_dmalloc_msgs(71)
  Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:main(761)
  Opening sockets 137
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:open_sockets(617)
  open_sockets: Broadcast sockets opened.
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.2.4 bcast=192.168.2.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.3.1 bcast=192.168.3.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:192.168.3.1 Broadcast address:192.168.3.255 Subnet mask:255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:192.168.2.4 Broadcast address:192.168.2.255 Subnet mask:255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:create_subnets(218)
  create_subnets: Ignoring loopback interface.
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:REMOTE_BROADCAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:main(780)
  Loaded hosts file /etc/lmhosts
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_serverlistdb.c:create_server_on_workgroup(157)
  create_server_on_workgroup: Created server entry EIS of type 40009a23 () on workgroup ARBEITSGRUPPE.
[2006/11/18 16:29:55, 3] nmbd/nmbd_workgroupdb.c:initiate_myworkgroup_startup(265)
  initiate_myworkgroup_startup: Added server name entry EIS on subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_serverlistdb.c:create_server_on_workgroup(157)
  create_server_on_workgroup: Created server entry EIS of type 40009a23 () on workgroup ARBEITSGRUPPE.
[2006/11/18 16:29:55, 3] nmbd/nmbd_workgroupdb.c:initiate_myworkgroup_startup(265)
  initiate_myworkgroup_startup: Added server name entry EIS on subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:56, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:29:56, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.3.1 ttl=0 nb_flags=80 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.3.1 ttl=0 nb_flags=80 to subnet 192.168.3.1
[2006/11/18 16:30:10, 3] nmbd/nmbd_serverlistdb.c:write_browse_list(419)
  write_browse_list: Wrote browse list into file /var/lock/samba/browse.dat
[2006/11/18 16:31:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:31:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE
[2006/11/18 16:33:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:33:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE

Code: Alles auswählen

[2006/11/18 16:29:55, 0] smbd/server.c:main(847)
  smbd version 3.0.23c-for-eisfair-2 started.
  Copyright Andrew Tridgell and the Samba Team 1992-2006
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[homes]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[all]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[public]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[print$]"
[2006/11/18 16:29:55, 3] param/loadparm.c:lp_add_ipc(2629)
  adding IPC service
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(117)
  reloading printcap cache
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(223)
  reload status: ok
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(117)
  reloading printcap cache
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(223)
  reload status: ok
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.2.4 bcast=192.168.2.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.3.1 bcast=192.168.3.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 3] smbd/server.c:main(877)
  loaded services
[2006/11/18 16:29:55, 3] smbd/server.c:main(892)
  Becoming a daemon.
[2006/11/18 16:29:55, 2] lib/tallocmsg.c:register_msg_pool_usage(61)
  Registered MSG_REQ_POOL_USAGE
[2006/11/18 16:29:55, 2] lib/dmallocmsg.c:register_dmalloc_msgs(71)
  Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] printing/printing.c:start_background_queue(1386)
  start_background_queue: Starting background LPQ thread
[2006/11/18 16:29:55, 2] smbd/server.c:open_sockets_smbd(384)
  waiting for a connection
Hoffe, dass es weiterhilft...

[Edit:] Wie zu sehen ist, hat der Eis zwei Netzwerkkarten mit den IPs 192.168.2.4 und 192.168.3.1, wobei die Anfrage aus dem ersten Netz kommt...

Gruß
Troubleshooter

Frockert hat geschrieben:Hi,


stelle mal in der samba-config den Debuglevel auf 3, samba neu starten.
Dann die aktuellen Ausgaben nach der Zugriffscheiterung aus den /var/log/log.smbd und /var/log/log.nmbd posten.


...
SAMBA_DEBUGLEVEL='0' # For debugging only: 0-3
# You will find debug messages in
# /var/log/log.smbd, /var/log/log.nmbd
...



Gruß
Frockert
Nach oben
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

Hm,

Du hast auf auto (config) gestellt, oder?

SAMBA_MANUAL_CONFIGURATION='no'

Bin mir nicht sicher, vermutlich werden die optionen darunter dann nicht ausgewertet.
Im log konnte ich nicht wirklich Probleme beim Zugriff erkennen.

Stelle mal auf SAMBA_MANUAL_CONFIGURATION='yes' und

SAMBA_INTERFACES='192.168.0.7/255.255.0.0' (Deine IP-Adresse der Sambanetzwerkkarte)
SAMBA_TRUSTED_NETS='192.168.0.0/24'
SAMBA_DEBUGLEVEL='3'

und dann mal neustart, zugriff, log posten.

Code: Alles auswählen

...hat der Eis zwei Netzwerkkarten mit den IPs 192.168.2.4 und 192.168.3.1...



Gruß
Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

So, hab die Interfaces mal eingestellt, bringt aber keine Besserung:

Code: Alles auswählen

[2006/11/18 16:29:55, 0] nmbd/nmbd.c:main(699)
  Netbios nameserver version 3.0.23c-for-eisfair-2 started.
  Copyright Andrew Tridgell and the Samba Team 1992-2006
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:reload_nmbd_services(263)
  services not loaded
[2006/11/18 16:29:55, 2] nmbd/nmbd.c:main(723)
  Becoming a daemon.
[2006/11/18 16:29:55, 2] lib/tallocmsg.c:register_msg_pool_usage(61)
  Registered MSG_REQ_POOL_USAGE
[2006/11/18 16:29:55, 2] lib/dmallocmsg.c:register_dmalloc_msgs(71)
  Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:main(761)
  Opening sockets 137
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:open_sockets(617)
  open_sockets: Broadcast sockets opened.
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.2.4 bcast=192.168.2.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.3.1 bcast=192.168.3.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:192.168.3.1 Broadcast address:192.168.3.255 Subnet mask:255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:192.168.2.4 Broadcast address:192.168.2.255 Subnet mask:255.255.255.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:create_subnets(218)
  create_subnets: Ignoring loopback interface.
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:UNICAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
[2006/11/18 16:29:55, 2] nmbd/nmbd_subnetdb.c:make_subnet(144)
  making subnet name:REMOTE_BROADCAST_SUBNET Broadcast address:0.0.0.0 Subnet mask:0.0.0.0
[2006/11/18 16:29:55, 3] nmbd/nmbd.c:main(780)
  Loaded hosts file /etc/lmhosts
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_serverlistdb.c:create_server_on_workgroup(157)
  create_server_on_workgroup: Created server entry EIS of type 40009a23 () on workgroup ARBEITSGRUPPE.
[2006/11/18 16:29:55, 3] nmbd/nmbd_workgroupdb.c:initiate_myworkgroup_startup(265)
  initiate_myworkgroup_startup: Added server name entry EIS on subnet 192.168.2.4
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_serverlistdb.c:create_server_on_workgroup(157)
  create_server_on_workgroup: Created server entry EIS of type 40009a23 () on workgroup ARBEITSGRUPPE.
[2006/11/18 16:29:55, 3] nmbd/nmbd_workgroupdb.c:initiate_myworkgroup_startup(265)
  initiate_myworkgroup_startup: Added server name entry EIS on subnet 192.168.3.1
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet UNICAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name *<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:55, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name __SAMBA__<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet REMOTE_BROADCAST_SUBNET
[2006/11/18 16:29:56, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:29:56, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.2.4 ttl=0 nb_flags= 0 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.2.4 ttl=0 nb_flags=80 to subnet 192.168.2.4
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<20> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<03> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name EIS<00> with first IP 192.168.3.1 ttl=0 nb_flags= 0 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<00> with first IP 192.168.3.1 ttl=0 nb_flags=80 to subnet 192.168.3.1
[2006/11/18 16:30:00, 3] nmbd/nmbd_namelistdb.c:add_name_to_subnet(247)
  add_name_to_subnet: Added netbios name ARBEITSGRUPPE<1e> with first IP 192.168.3.1 ttl=0 nb_flags=80 to subnet 192.168.3.1
[2006/11/18 16:30:10, 3] nmbd/nmbd_serverlistdb.c:write_browse_list(419)
  write_browse_list: Wrote browse list into file /var/lock/samba/browse.dat
[2006/11/18 16:31:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:31:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE
[2006/11/18 16:33:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.2.4 for workgroup ARBEITSGRUPPE
[2006/11/18 16:33:10, 3] nmbd/nmbd_sendannounce.c:send_host_announcement(208)
  send_host_announcement: type 9a23 for host EIS on subnet 192.168.3.1 for workgroup ARBEITSGRUPPE

Code: Alles auswählen

[2006/11/18 16:29:55, 0] smbd/server.c:main(847)
  smbd version 3.0.23c-for-eisfair-2 started.
  Copyright Andrew Tridgell and the Samba Team 1992-2006
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[homes]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[all]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[public]"
[2006/11/18 16:29:55, 2] param/loadparm.c:do_section(3704)
  Processing section "[print$]"
[2006/11/18 16:29:55, 3] param/loadparm.c:lp_add_ipc(2629)
  adding IPC service
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(117)
  reloading printcap cache
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(223)
  reload status: ok
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(117)
  reloading printcap cache
[2006/11/18 16:29:55, 3] printing/pcap.c:pcap_cache_reload(223)
  reload status: ok
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.2.4 bcast=192.168.2.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 2] lib/interface.c:add_interface(81)
  added interface ip=192.168.3.1 bcast=192.168.3.255 nmask=255.255.255.0
[2006/11/18 16:29:55, 3] smbd/server.c:main(877)
  loaded services
[2006/11/18 16:29:55, 3] smbd/server.c:main(892)
  Becoming a daemon.
[2006/11/18 16:29:55, 2] lib/tallocmsg.c:register_msg_pool_usage(61)
  Registered MSG_REQ_POOL_USAGE
[2006/11/18 16:29:55, 2] lib/dmallocmsg.c:register_dmalloc_msgs(71)
  Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(250)
[2006/11/18 16:29:55, 3] lib/util_seaccess.c:se_access_check(251)
  se_access_check: user sid is S-1-5-21-3859511099-1930515036-2716590911-1000
  se_access_check: also S-1-5-32-544
  se_access_check: also S-1-1-0
  se_access_check: also S-1-5-2
  se_access_check: also S-1-5-11
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:push_sec_ctx(208)
  push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/uid.c:push_conn_ctx(345)
  push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:set_sec_ctx(241)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2006/11/18 16:29:55, 3] smbd/sec_ctx.c:pop_sec_ctx(339)
  pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2006/11/18 16:29:55, 3] printing/printing.c:start_background_queue(1386)
  start_background_queue: Starting background LPQ thread
[2006/11/18 16:29:55, 2] smbd/server.c:open_sockets_smbd(384)
  waiting for a connection

Gruß

Troubleshooter
Frockert hat geschrieben:Hm,

Du hast auf auto (config) gestellt, oder?

SAMBA_MANUAL_CONFIGURATION='no'

Bin mir nicht sicher, vermutlich werden die optionen darunter dann nicht ausgewertet.
Im log konnte ich nicht wirklich Probleme beim Zugriff erkennen.

Stelle mal auf SAMBA_MANUAL_CONFIGURATION='yes' und

SAMBA_INTERFACES='192.168.0.7/255.255.0.0' (Deine IP-Adresse der Sambanetzwerkkarte)
SAMBA_TRUSTED_NETS='192.168.0.0/24'
SAMBA_DEBUGLEVEL='3'

und dann mal neustart, zugriff, log posten.

Code: Alles auswählen

...hat der Eis zwei Netzwerkkarten mit den IPs 192.168.2.4 und 192.168.3.1...



Gruß
Frockert
Nach oben
Frockert
Erleuchteter
Erleuchteter
Beiträge: 865
Registriert: Dienstag 12. März 2002, 21:40

Beitrag von Frockert »

Ok,

da kommen keine Anfragen aus dem Netzwerk...läuft auf dem Clienten ne Firewall?
Du merkst es kann an vielen Dingen liegen.
Wenns nun nicht die Firewall ist, kann ich Dir noch anbieten mich per Remote auf die Kiste einzuloggen und mir dir Konfig im Detail an zuschauen. (Gerne auch per vnc zum mit verfolgen).




Gruß
Frockert
---------------------------
2.6.11-kanotix-3 KDE 3.3.2
http://www.frockert.de
http://www.eifel-forum.de
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

Zumindest auf Win2K läuft ja gar keine Firewall. Bei XP hab ich sie mal abgeschaltet und komm auch nicht drauf.

Im Prinzip hab ich nichts gegen ein Remote Login. Müsste dann nur mal nachsehen, wie ich die Internet-Verbindungsfreigabe konfigurieren muss (benutze die, um den Eis ins Netz zu bekommen). Weiterleitung von Port 22 müsste für SSH genügen?

Außerdem wäre es mir dann recht, wenn wir einen Termin ausmachen, da ich nur Modembesitzer bin und sonst die ganze Zeit das Telefon nicht nutzbar ist...

Ansonsten: Würde auch die smb.conf reichen? Ich poste sie mal...

Code: Alles auswählen

#----------------------------------------------------------------------------
# Samba configuration file generated by /var/install/config.d/samba.sh
#
# Version of Samba for eisfair is 1.26.0.
# SAMBA_MANUAL_CONFIGURATION is no.
#
# Do not edit this file, use
#
# 'Edit Samba Configuration'
#
# in Samba Services Menu!
#
# Creation date: 18.11.2006 19:44:17
#----------------------------------------------------------------------------
[global]
 dos charset = CP850
 unix charset= ISO8859-15
 display charset= ISO8859-15
 workgroup = Arbeitsgruppe
 serverstring = 
 interfaces = 127.0.0.1/8 192.168.2.4/255.255.255.0
 bind interfaces only = yes
 security = user
 password server = 
 pam password change = yes
 passwd program = /usr/bin/passwd %u
 passwd chat = *New*password:* %n\n *new*password:* %n\n *changed*
 username map = /etc/user.map
 username level = 2
 unix password sync = yes
 debug level = 3
 max log size = 10000
 nameresolveorder = lmhosts host wins bcast
 time server = yes
 deadtime = 60
 socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE
 printing = lprng
 print command = chmod 666 %s; name="`echo '%J' | sed "s/^.*- //"`"; if [ -z "$name" ]; then name="%s"; fi; /usr/bin/lpr -P%p -J"$name" %s; rm %s
 lpq command = /usr/bin/lpq -P%p -L
 lprm command = /usr/bin/lprm -P%p %j
 lppause command = /usr/sbin/lpc hold %p %j
 lpresume command = /usr/sbin/lpc release %p %j
 queuepause command = /usr/sbin/lpc stop %p
 queueresume command = /usr/sbin/lpc start %p
 printcap name = /etc/printcap
 load printers = no
 mangling method = hash2
 domain logons = no
 add user script = /usr/sbin/useradd -m '%u' -c '%u'
 add machine script = 
 delete user script = /var/install/bin/remove-user '%u' y
 add group script = /var/install/bin/add-group '%g'
 delete group script = /var/install/bin/remove-group '%g'
 add user to group script = /usr/sbin/usermod -G '%g' '%u'
 delete user from group script = /usr/sbin/userdel '%g' '%u'
 set primary group script = /var/install/bin/modify-user -g '%u' '%g'
 os level = 0
 preferred master = no
 local master = no
 domain master = no
 wins support = no
 wins hook = 
 wins server = 
 wins proxy = no
 kernel oplocks = no
 utmp = yes
 message command = /bin/mail -s 'message from %f' root < %s; rm %s
 dfree command = /var/install/bin/samba-dfree
 admin users = root
 hosts allow = 127.0.0. 192.168.2.0/255.255.255.0
 dos filetime resolution = yes
 use sendfile = yes
 unix extensions = no
 enable privileges = no
 map read only = permissions
 enable core files = no
 host msdfs  = no
 msdfs root = no
 acl compatibility = auto
 force unknown acl user = yes
 inherit acls = yes
 map acl inherit = yes
 map hidden = no
 map system = no
 map archive = no
 store dos attributes = yes
 ea support = yes
 oplocks = no
 level2 oplocks = no
 blocking locks = no
 hide files = /desktop.ini/Thumbs.db/
 dos filemode = yes

[homes]
 comment = home directory on eis
 writeable = yes
 create mode = 0600
 force create mode = 0600
 directory mode= 0700
 force directory mode= 0700
 browseable = no
 valid users = %S
 root preexec = /var/install/bin/samba-smbinfo "T=%T|d=%d|v=%v|h=%h|L=%L|N=%N|p=%p|R=%R|S=%S|P=%P|U=%U|G=%G|u=%u|g=%g|H=%H|I=%I|M=%M|m=%m|a=%a" &

[all]
 comment = root directory on eis
 read only = no
 browseable = no
 path = /
 dont descend = proc
 valid users = root
 create mode = 0700
 force create mode = 0700
 directory mode= 0700
 force directory mode= 0700
 root preexec = /var/install/bin/samba-smbinfo "T=%T|d=%d|v=%v|h=%h|L=%L|N=%N|p=%p|R=%R|S=%S|P=%P|U=%U|G=%G|u=%u|g=%g|H=%H|I=%I|M=%M|m=%m|a=%a" &

[public]
 comment = public directory on eis
 path = /public
 force create mode = 0777
 force directory mode= 0777
 browseable = yes
 writeable = yes
 root preexec = /var/install/bin/samba-smbinfo "T=%T|d=%d|v=%v|h=%h|L=%L|N=%N|p=%p|R=%R|S=%S|P=%P|U=%U|G=%G|u=%u|g=%g|H=%H|I=%I|M=%M|m=%m|a=%a" &

[print$]
 comment = samba printer drivers on %h
 browseable = yes
 writeable = no
 path = /samba_printer_drivers
 write list = root
Frockert hat geschrieben:Ok,

da kommen keine Anfragen aus dem Netzwerk...läuft auf dem Clienten ne Firewall?
Du merkst es kann an vielen Dingen liegen.
Wenns nun nicht die Firewall ist, kann ich Dir noch anbieten mich per Remote auf die Kiste einzuloggen und mir dir Konfig im Detail an zuschauen. (Gerne auch per vnc zum mit verfolgen).




Gruß
Frockert
Nach oben
Troubleshooter
Neugieriger
Neugieriger
Beiträge: 19
Registriert: Samstag 11. März 2006, 18:45

Beitrag von Troubleshooter »

Hallo,

noch mal vielen Dank für die Mühe. Es läuft jetzt und ich bin sprachlos.

Ich habe wissentlich das Samba-Paket nicht angefasst. Ich habe am Eisfair folgendes gemacht:

1.) Das Routing-Paket in Betrieb genommen und getestet, damit die beiden Subnetze am Eis kommunizieren können

2.) Eine zweite Festplatte formatiert und ins Public-Verzeichnis gemountet.

Dazwischen netürlich mehrere Reboots.

Ich habe definitiv nichts verändert an:

1.) Der Samba-Konfiguration

2.) Den Windows-Einstellungen


Jetzt kümmere ich mich um den NFS-Server...

Einen sprachlosen, aber glücklichen Gruß

Troubleshooter
Nach oben

Zurück zu „Anfängerfragen“