debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *#T #
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *###T #T T ##T ##T ###T ###T ###T #T ####T
Retry count exceeded; starting again
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *######T ###T ######T ##########T ##T #T #T T ######T #
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *T ######T T #T T #T ###########T ######T ###T ##T ##
Retry count exceeded; starting again
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#######T #####T ##T ###########T #T #####T ##T ######T #####T #######T
Retry count exceeded; starting again
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *####T #####T T ############T #T ##T ########T T ######T T #
Retry count exceeded; starting again
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#T #####T ##T ####T #######T #######T T ########T ##T ##T #########
Retry count exceeded; starting again
Using SCC ETHERNET device
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *T ###########T T #########T ###T T #####
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: 3Com 3C920 integrierter Fast Ethernet-Controller (3C905C-TX kompatibel) (0)
IP-Adresse des Netzwerkadapters: 192.168.0.1
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz @ 1690 MHz
Dateiname des Images: JtG_Neutrino_Komplett_2x.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.2
------ Powered by http://www.dboxservice-hallenberg.de ------
HI,
ich brauche hilfe.. meine Dbox2 funktioniert nicht mehr.. hab sie versucht zu flashen und jetzt kommt sie nurnoch bis "loading kernel" und hält dann an...
ich habe jetzt den hallenberg flasher benutzt und irgendwie klappts nicht!
Bitte um Hilfe!
Danke im Vorraus!