loading kernel message problem

[koximo]

Hi!

Hello!

I shop a Dbox2 from Germany. and It had "Kein System" but only after 2 minute of start. It shows Betaresearch... for 2 minutes and later shows debug mode display with Kein system.
I flashed if with IFA(v1.56 because with v2.2 I can not it) but now the dbox LCD freezing with LOADING KERNEL message.

Bottom post the IFA log and Boot Manager log.

A piece of Boot Manager Log say:

Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Inconsistency detected by ld.so: dl-minimal.c: 84: __libc_memalign: Assertion `p
age != ((void *) -1)' failed!
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..

Any solution?:gruebel:

Regards from spain
koximo

Edited by Koximo to erased illegal image LOG.

[PT-1]

The Image you are trying to flash contains Illegal Contents and we will not be able to support you !

Please try to flash one of the following legal Images:

DietmarW
JtG (JackTheGrabber)
Yadi

Use google to find them and I suggest you download my Dbox Help File as it explains how to save your ucodes&cam-alpha and avia files as you will need them

[koximo]

The Image you are trying to flash contains Illegal Contents and we will not be able to support you !

Please try to flash one of the following legal Images:

DietmarW
JtG (JackTheGrabber)
Yadi

Use google to find them and I suggest you download my Dbox Help File as it explains how to save your ucodes&cam-alpha and avia files as you will need them

Sorry me!

I have looked for the images that you comment but I am not sure that it is and I would not like to put any image without I am sure.
You could indicate a link to me of where download it and the name of image.

Thanks.
koximo

[koximo]

Hallo!

I found a Yadi image and here this the LOG of the IFA and the Bootmanager.

=================================
IFA v1.56 LOG
=================================

wdebug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.201, My IP 192.168.1.202
debug: Sending TFTP-request for file D/ppcboot11266/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-e2-e1
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.201; our IP address is 192.168.1.202
Filename 'D/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.201; our IP address is 192.168.1.202
Filename 'D/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected

dbox2-ppcboot> bootp 120000 /tftpboot/flash.img

BOOTP broadcast 1
TFTP from server 192.168.1.201; our IP address is 192.168.1.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *##############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################
###############################################


dbox2-ppcboot> protect off 10020000 107FFFFF

...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107FFFFF

Erase Flash from 0x10020000 to 0x107fffff

sector 4 ....
sector 5 ....
sector 6 ....
sector 7 ....
sector 8 ....
sector 9 ....
sector 10 ....
sector 11 ....
sector 12 ....
sector 13 ....
sector 14 ....
sector 15 ....
sector 16 ....
sector 17 ....
sector 18 ....
sector 19 ....
sector 20 ....
sector 21 ....
sector 22 ....
sector 23 ....
sector 24 ....
sector 25 ....
sector 26 ....
sector 27 ....
sector 28 ....
sector 29 ....
sector 30 ....
sector 31 ....
sector 32 ....
sector 33 ....
sector 34 ....
sector 35 ....
sector 36 ....
sector 37 ....
sector 38 ....
sector 39 ....
sector 40 ....
sector 41 ....
sector 42 ....
sector 43 ....
sector 44 ....
sector 45 ....
sector 46 ....
sector 47 ....
sector 48 ....
sector 49 ....
sector 50 ....
sector 51 ....
sector 52 ....
sector 53 ....
sector 54 ....
sector 55 ....
sector 56 ....
sector 57 ....
sector 58 ....
sector 59 ....
sector 60 ....
sector 61 ....
sector 62 ....
sector 63 ....
sector 64 ....
sector 65 ....
sector 66 ....
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000

Copy to Flash...

dbox2-ppcboot>
------ Systeminformations ------
Selected networkdevice: NIC Fast Ethernet PCI Familia RTL8139 de Realtek - Minipuerto del administrador de paquetes (0)
IP-address of the networkdevice: 192.168.1.201
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------


=======================================
BOOTmanager LOG
=======================================
wdebug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-42.88.45.07.00.00-c8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)

CPU: PPC823ZTnnB2 at 67.524496 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
......................................................................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mr 16
21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:41:e2:e1
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init

Any idea?

I repeat symtons:

It had "Kein System" but only after 2 minute of start. It shows Betaresearch... for 2 minutes and later shows debug mode display with Kein system.
I flashed if with IFA(v1.56 because with v2.2 I can not it) but now the dbox LCD freezing with LOADING KERNEL message.

Best Regards from spain
koximo

PD: I have erased the previous LOG of post.

[koximo]

hi!

I have waited for 10 days, some idea? Please.

Regards from Spain
koximo

[koximo]

It will be that it does not have solution?

[sagemol]

Hi !

The second log You have posted looks good as far.

Did the Box hang then ?

Greez !

[koximo]

Dbox2 is hang.

Any Idea Please?

[sagemol]

Please post a log from the extended self test of the box.
You can get that by pressing "power" and "arrow up" simultanously,
and then releasing only "power".
Looks like Your Box has a hardware problem with memory.

Greez !

[koximo]

Please post a log from the extended self test of the box.
You can get that by pressing "power" and "arrow up" simultanously,
and then releasing only "power".
Looks like Your Box has a hardware problem with memory.

Greez !

Log extended HERE:

debug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-42.88.45.07.00.00-c8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

Any solution?

[sagemol]

All the tests an logs look fine so far.
No idea what is going wrong here.
Maybe there are some bad bits in the flash of the box ?

Greez !