ich habe erfolgreich meine Sagem 1xI 600 umgebaut und auch die Ucodes reinkopiert aber bekomme immer nach dem Auswahlmenü ein Rosabild und auch der Transponderscan funktioniert nicht. Jetzt weiß ich nicht mehr weiter und habe hier mal die Ausgabe des Terminalprog eingefügt. Es scheint einen Fehler mit dem Avia aber seht selbst mal bitte
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:31:2d:4b
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Real Time Cloc
k Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init VES1993 / AT76C651
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
/lib/modules/2.4.2/misc/ves1993.o: unresolved symbol register_frontend
/lib/modules/2.4.2/misc/ves1993.o: unresolved symbol unregister_frontend
/lib/modules/2.4.2/misc/ves1993.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
enx-core: Loaded AViA eNX core driver
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol register_demux
/lib/modules/2.4.2/misc/enx_dmx.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
avia_vbi: version (Mar 20 2002-22:07:48)
avia_vbi: error - no demux found
/lib/modules/2.4.2/misc/enx_vbi.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
Network LCD-Driver $Id: lcdd.cpp,v 1.43 2002/03/18 00:02:57 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.105 2002/03/20 18:58:36 field Exp $
caching 96 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
Zapit $Id: zapit.cpp,v 1.99 2002/03/20 01:31:23 happydude Exp $
cp: /var/tuxbox/config/zapit/last_chan: No such file or directory
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
[zapit] open ca0: No such file or directory
[zapit] /var/tuxbox/config/zapit/services.xml: No such file or directory
[zapit] /var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.55 2002/03/19 23:23:25 McClean Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (03, 3, 2, Sagem)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
httpd gestartet
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
NeutrinoNG $Id: neutrino.cpp,v 1.201 2002/03/20 18:57:34 field Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedcontroldclient: connect: Connection refused
enable flash
Software update enabled
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/[sectionsd] DM
X: /dev/ost/demux0:doing network setup...
IP : 192.168.4.51current flash-version: 1.1.21032002-12.1controldclient: c
onnect: Connection refused
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
Changed to TV-mode
[zapit] fopen: /tmp/zapit_last_c
All bouquets-channels received[sectionsd] DMX: /dev/ost/demux0: No such file or
directory[sectionsd] DMX: /dev/ost/demux0: No such file or directory
controldclient: connect: Connection refused
controldclient: connect: Connectcontroldclient: connect: Connection refused[sect
ionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0[sectionsd] DMX: /dev/ost/demux0: No such file o
r directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
[sectionsd] DMX: DMX_STOP: Bad file descriptor
Oops: kernel access of bad area, sig: 11
NIP: C0010990 XER: C000107E LR: C005C424 SP: C18C9DF0 REGS: c18c9d40 TRAP: 0300
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 7C004B8C, DSISR: 00000123
TASK = c18c8000[87] 'zapit' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00002000 C18C9DF0 C18C8000 7C004B78 C18A6DA0 00000000 C18A6DFC 00000000
GPR08: C18A6020 C3AB7704 00000186 00000001 353C3C93 10053574 01FE7200 01F9FB88
GPR16: 00000000 7FFFFD08 1006154C 7FFFFD08 00009032 018C9E80 00000000 C0002718
GPR24: C0002440 10050000 C014C0D8 C1C585D4 C18A6DA0 FFFFFFED C160A740 C1C585D0
Call backtrace:
C1F9BEA0 C0032100 C0031F9C C00323A8 C000249C 0FF8CBB4 10008610
1000B51C 1000B7E8 1000D524 0FCA1438 00000000
[zapitclient] couldn't connect to zapit!: Connection refused
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_START: Bad file descriptor
[zapitclient] couldn't connect to zapit!: Connection refused
[zapitclient] couldn't connect t[sectionsd] DMX: /dev/ost/demux0: No such file o
r directory[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
Übrigens die letzten Zeilen kamen wo ich den Transponderscan machen wollte.
Vielen Dank
Regla