habe eine nokia dbox2 sat die folgendes problem hat
das flashen funktioniert eigendlich einwandfrei, ausser das die box am anfang öfters selbständig einen reset macht
die box hat 32 MB onboard , benutze den dbox bootmanager ein nullmodemkabel und ein crossoverkabel,habe mit dieser konfiguration aber bei anderen boxen keine probleme
wenn linux drauf ist bleibt sie bei loading kernel und dem logo fb hängen
wenn orginalsoftware drauf ist kommt kurz das debugfenster, dann lade, dann betaresearch 3 balken, wobei die ersten beiden kein trennstrich haben,( was nichts mit einem defekten display zu tun hat), dann stürzt die box ab und startet neu , debugfenster lade usw.
wenn die box kalt ist(mehrere stunden stromlos war) , dann ist das problem nicht so schlimm, wie wenn die box schon länger läuft.
wenn mann sie länger eingesteckt in dieser endlosschleife lässt kommt irgendwenn gar nicht mehr der debugmodus im display, sondern nur betaresearch 3 balken - wieder von vorn
am bootmanager sieht man dann das sie in einer loop schleife hängt, (also immer wieder einen reset macht)
der fett gedruckte teil ist diese loop schleife , hier jetz nur einmal
hier mal ein log vom flashen
debug: DDF: Calibrating delay loop... debug: DDF: 323.4294949967 BogoMIPS
debug: BMon V1.0 mID 01
debug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.3
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-58-21
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
debug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.3
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-58-21
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other **** to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/d-box/DBOX2/cdkroot/nosat237145016.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename '/C/d-box/DBOX2/cdkroot/nosat237145016.img'.
Load address: 0x120000
Loading: ############################## ############################## ###########
########################debug: DDF: Calibrating delay loop... debug: DDF: 66.828
9 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.3
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-58-21
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
Abort
FB logo not found
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other **** to stop autoboot: 0
dbox2-ppcboot>
dbox2-ppcboot> bootp 120000 /C/d-box/DBOX2/cdkroot/nosat237145016.img
BOOTP broadcast 1
debug: DDF: Calibrating delay loop... debug: DDF: 67.8271 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.3
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-58-21
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
Abort
FB logo not found
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other **** to stop autoboot: 0
dbox2-ppcboot>
dbox2-ppcboot> bootp 120000 /C/d-box/DBOX2/cdkroot/nosat237145016.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.3
Filename '/C/d-box/DBOX2/cdkroot/nosat237145016.img'.
Load address: 0x120000
Loading: ############################## ############################## ###########
############################## #############T ############################## #####
############################## ############################## ####################
############################## ##T ############################## ################
############################## ############################## ###T ###############
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ######T ############################## ############
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ########################T ########################
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ############################## ####################
############################## ##

dbox2-ppcboot> protect off 10020000 107fffff
.............................. .............................. ...
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 ....

Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
