Bootlog verstehen

Domestos & Derivate
hno2fe
Neugieriger
Neugieriger
Beiträge: 5
Registriert: Freitag 13. Juli 2007, 20:44

Bootlog verstehen

Beitrag von hno2fe »

Hallo ,
ich habe ien Box bekommen, die nicht mehr hochfährt,
kann jemand mir den Bootlog erklären, was da falsch ist
  • debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
    debug: BMon V1.2 mID 03
    debug: feID 00 enxID 03
    debug: fpID 52 dsID 01-c4.90
    debug: HWrev 21 FPrev 0.23
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
    debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 144212
    verify sig: 263
    Branching to 0x40000


    U-Boot 1.0.2 (TuxBox) (Apr 28 2004 - 09:52:43)

    CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
    Board: DBOX2, [args..]
    - echo args to console; \c suppresses newline
    , BMon Vunknown
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
    *** failed ***
    ### ERROR ### Please RESET the board ###
    debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
    debug: WATCHDOG RESET
    debug: BMon V1.2 mID 03
    debug: feID 00 enxID 03
Gruß & Danke
Olli
dietmarw
Contributor
Beiträge: 1833
Registriert: Mittwoch 10. April 2002, 15:39

Beitrag von dietmarw »

FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
hardware (speicher) def.
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

sehr wahrscheinlich... versuch mal n aktuelles Image zu flashen und poste das LOG vom flashvorgang
never change a running system