Festplatte nicht gemountet

[dreambox7000]

So habe nun ein neues Kabel zum Modemport von HAllenberg bekommen und mich gestern und heute wieder vergeblich mit meiner Nokia auseinander gesetzt.

Die Festplatte wird erkannt, aber dauernd taucht im log wieder hda: lost interrupt auf. Der Treiber wird nicht richtig geladen. Und beim start der dbox steht im log : Festplatte wird gemountet in 6 Sekunden, 5 Sekunden .....
und dann Festplatte konnte nicht gemountet werden.

Ich werde noch bescheuert.
Es ist alles angeschlossen habe das IDE Interface jetzt sogar schon ohne Distanzhülsen draufgesteckt. Festplatte ist als MAster gejumpert und und. Sämtliche threads erfolglos durchgelesen.
Ich habe keine Ahnung mehr woran es liegen kann. Festplatte ist übrigens in Ordnung.

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Warte 6 Sekunden bis Festplatte gemountet ist
Warte 5 Sekunden bis Festplatte gemountet ist
Warte 4 Sekunden bis Festplatte gemountet ist
Warte 3 Sekunden bis Festplatte gemountet ist
Warte 2 Sekunden bis Festplatte gemountet ist
Warte 1 Sekunden bis Festplatte gemountet ist
Festplatte konnte nicht gemountet werden
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.


avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $

avia_gt_proc: found - AVIA GTX

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970

rm: cannot remove `/var/etc/.slot_multi': No such file or directory
rm: cannot remove `/var/etc/.com_betad': No such file or directory
rm: cannot remove `/var/etc/.multi_betad': No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: zapit.cpp,v 1.4 2007/12/16 13:26:10,
[zapit] PMT update enabled
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
Killed
Killed
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 43E onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 412 onid 1
hda: lost interrupt
/tmp/currentservices.xml: No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
cam.c,v 1.31 13th of May satsuse
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
[camd2] ca system id: 1702
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)
[LCDFONT] initializing core...[camd2] no card is in slot #2
[camd2] no card is in slot #1
[camd2] no card is in slot #2
[camd2] no card is in slot #1
[camd2] card_country:
[camd2] card_number:
[camd2] card_version: ffff

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 2500 events
[sectionsd] Caching 1 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
/tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
/tmp/neutrino)
[camd2] no card is in slot #2
[camd2] no card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...[basicsocket] send_data: Resourc
e temporarily unavailable
OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[neutrino] registering as event client
hda: lost interrupt
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
[timeThread] - 29.12.2007 16:43:23, tim: Sat Dec 29 16:43:23 2007
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
avia_gt_core: masking unhandled irq reg 1 bit 15
[CBasicClient] connect failed.
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
hda: lost interrupt
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
hda: lost interrupt
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
hda: lost interrupt
hda: lost interrupt
Partition check:
/dev/ide/host0/bus0/target0/lun0:<3>hda: lost interrupt
p1 p2
HD wird gemountet...
hda: lost interrupt

The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

got EOF thrice - exiting..
hda: lost interrupt
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /tmp/hdd failed: Inval
id argument

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 0 (off)
hda: lost interrupt

/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
hda: lost interrupt
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = 0 (128=quiet ... 254=fast)

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
hda: lost interrupt
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
shellexec Version 2.30
<Font "/share/fonts/micron_bold.ttf" loaded>

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
hda: lost interrupt

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
hda: lost interrupt
IDE treiber wird entladen

/dev/ide/host0/bus0/target0/lun0/disc:
issuing sleep command
hda: lost interrupt
dboxide: deactivating cs2
dboxide: driver unloaded
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38aa000
Probing IDE interface ide0...
hda: ST3160812A, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
hda: lost interrupt
hda: lost interrupt
/dev/ide/host0/bus0/target0/lun0:<3>hda: lost interrupt
p1 p2
HD wird gemounted...
hda: lost interrupt

The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

got EOF thrice - exiting..
hda: lost interrupt
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /tmp/hdd failed: Inval
id argument

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 0 (off)
hda: lost interrupt

/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
hda: lost interrupt
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = 0 (128=quiet ... 254=fast)

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
hda: lost interrupt

msgbox Message-Box Version 1.62
rm: cannot remove `/tmp/mount': No such file or directory

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
hda: lost interrupt
IDE treiber wird entladen

/dev/ide/host0/bus0/target0/lun0/disc:
issuing sleep command

[Houdini]

sry, no support!

[dreambox7000]

nu lasst doch mal das image weg. Darum geht es nicht. ES geht um die Festplatte.
MIt dem JTG Image besteht genau das selbe Problem

[Tommy]

nu lasst doch mal das image weg. Darum geht es nicht.

Es geht hier ums Prinzip. Was geht mit diesem LGI was mit dem JTG nicht geht?

[Gorcon]

nu lasst doch mal das image weg. Darum geht es nicht.

Es geht hier ums Prinzip. Was geht mit diesem LGI was mit dem JTG nicht geht?

Genau das weswegen es hier nicht erwünscht ist.

[dreambox7000]

Das ist so nervig. Ob es jetzt erwünscht oder nicht ist. Fakt ist das es nicht klappt. Und zwar weder mit legalen noch anderen images. Darum geht es. Aber wenn man hier nicht helfen kann oder will. Dann hau ich das Teil eben raus. Habe keine lust wieder Monate lang an dem Interface und der box rum zu doktern und anschließend klappt es immer noch nicht

[HorstH]

Wenn man "lost interupt" in der Boardsuche eingibt sollte einem genug Lesestoff zur Verfügung stehen.

[dreambox7000]

Hier mal ein log aus dem JTG Image

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.9 2007/12/20 19:34:12 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.253 2007/12/02 14:46:36 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.404 2007/12/17 09:53:04 seife Exp $
[frontend] uncommitted_switch_mode 0
/var/tuxbox/config/zapit/services.xml: No such file or directory
[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device
$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.6 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
hda: lost interrupt
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
Partition check:
/dev/ide/host0/bus0/target0/lun0:[sectionsd] getUTC: read: Connection timed out

<3>hda: lost interrupt
p1 p2
SGI XFS with no debug enabled
hda: lost interrupt
Adding Swap: 136544k swap-space (priority -1)
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
XFS: bad magic number
XFS: SB validate failed
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument

/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
setting standby to 0 (off)
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
hda: lost interrupt
IO_support = 1 (32-bit)
hda: lost interrupt
write-caching = 0 (off)
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
Harddisk Menu 2007-08-24 JTG-Riker V0.35
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
[neutrino ide] Set mountpoint to default: /hdd
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
[neutrino ide] executing /var/tuxbox/config/hddcheck.start
[: missing ]
e2fsck 1.40.2 (12-Jul-2007)
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt

[dreambox7000]

und dann noch mal eins vom formatieren. Der Treiber wurde geladen. Typenbezeichnung der Festplatte wird angezeigt und auch Größe, aber auch das formatieren muss wieder manuell abgebrochen werden, weil nur noch lost interrupt erscheint

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
Partition check:
/dev/ide/host0/bus0/target0/lun0:[sectionsd] getUTC: read: Connection timed out

<3>hda: lost interrupt
p1 p2
SGI XFS with no debug enabled
hda: lost interrupt
Adding Swap: 136544k swap-space (priority -1)
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
XFS: bad magic number
XFS: SB validate failed
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument

/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
setting standby to 0 (off)
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
hda: lost interrupt
IO_support = 1 (32-bit)
hda: lost interrupt
write-caching = 0 (off)
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/var/tuxbox/config/zapit/services.xml: No such file or directory
[sectionsd] getUTC: read: Connection timed out
Harddisk Menu 2007-08-24 JTG-Riker V0.35
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
[neutrino ide] Set mountpoint to default: /hdd
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
[neutrino ide] executing /var/tuxbox/config/hddcheck.start
[: missing ]
e2fsck 1.40.2 (12-Jul-2007)
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
fsck.ext2: Bad magic number in super-block while trying to open /dev/ide/host0/b
us0/target0/lun0/part2
[neutrino ide] HDD check failed
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
Harddisk Menu 2007-08-24 JTG-Riker V0.35
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
[neutrino ide] Set mountpoint to default: /hdd
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
[neutrino ide] executing /var/tuxbox/config/formating.start
[: missing ]
/var/tuxbox/config/zapit/services.xml: No such file or directory
[neutrino ide] swapoff successful
/dev/ide/host0/bus0/target0/lun0:<3>hda: lost interrupt
p1 p2

Disk /dev/ide/host0/bus0/target0/lun0/disc: 19457 cylinders, 255 heads, 63 secto
rs/track
hda: lost interrupt
Old situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/ide/host0/bus0/target0/lun0/part1 0+ 16 17- 136552 8
2 Linux swap / Solaris
/dev/ide/host0/bus0/target0/lun0/part2 17 19456 19440 156151800 8
3 Linux
/dev/ide/host0/bus0/target0/lun0/part3 0 - 0 0
0 Empty
/dev/ide/host0/bus0/target0/lun0/part4 0 - 0 0
0 Empty
New situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/ide/host0/bus0/target0/lun0/part1 0+ 16 17- 136552 8
2 Linux swap / Solaris
/dev/ide/host0/bus0/target0/lun0/part2 17 19456 19440 156151800 8
3 Linux
/dev/ide/host0/bus0/target0/lun0/part3 0 - 0 0
0 Empty
/dev/ide/host0/bus0/target0/lun0/part4 0 - 0 0
0 Empty
Successfully wrote the new partition table

Re-reading the partition table ...
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
/dev/ide/host0/bus0/target0/lun0:<3>hda: lost interrupt
p1 p2

[neutrino ide] sfdisk completed successful
Setting up swapspace version 1, size = 139825152 bytes
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
[neutrino ide] mkswap completed successful
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt

[seife]

vermutlich wäre es interessant zu sehen, ob der IDE-Treiber was sagt, wenn er geladen wird. Evtl. ist dem ja schon unwohl. Das fehlt aber in deinen logs.

[dreambox7000]

so das passiert, wenn ich den Treiber lade


[neutrino] Loading of scan settings failed. Using defaults.
cannot read locale: No such file or directory
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] getUTC: read: Connection timed out
route: SIOCDELRT: No such process
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
/bin/neutrino: /var/tuxbox/ucodes/ucode.bin: No such file or directory
/bin/neutrino: /var/tuxbox/ucodes/cam-alpha.bin: No such file or directory
[sectionsd] getUTC: read: Connection timed out
/bin/neutrino: /var/tuxbox/ucodes/ucode.bin: No such file or directory
[sectionsd] getUTC: read: Connection timed out
zapit shot down
CXA2092 found
CXA2092 found
Unmounting 'tmpfs' on '/tmp'
umount: cannot umount /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
umount: forced umount of /var failed!
umount: cannot umount /var: Device or resource busy
Oops: umount failed -- trying to remount readonly...
Ready to shutdown system...
The system is going down NOW!
Sending SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
Requesting system reboot
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-68.84.1b.07.00.00-5d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 165808
verify sig: 262
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox) (Dec 21 2007 - 09:56:49)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694221 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 694157 Bytes = 677.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.35.5-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 21. Dez 0
9:53:57 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:7c:32
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.8.2 (2007-12-21 09:55:47 CET)
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.9 2007/12/20 19:34:12 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.253 2007/12/02 14:46:36 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.404 2007/12/17 09:53:04 seife Exp $
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/services.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.6 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[neutrino] initialized everything
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
Harddisk Menu 2007-08-24 JTG-Riker V0.35
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
[neutrino ide] Set mountpoint to default: /hdd
[sectionsd] getUTC: read: Connection timed out
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3ce8000
Probing IDE interface ide0...
hda: ST3160812A, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
Partition check:
/dev/ide/host0/bus0/target0/lun0:<3>hda: lost interrupt
p1 p2
SGI XFS with no debug enabled

und dann wird gefragt ob ich formatieren möchte, was am ende wieder mit hda: lost interrupt endet

[dreambox7000]

ISt komisch hab hier sämtliche Threads was zu meinem Problem passt durchgelesen und nie weiß einer ne Lösung

[Gorcon]

Die Ursache heist dass das Interface keinen Interupt bekommt. Was wohl am Kabel liegen könnte. schon mal überprüft und durchgemessen?

[dreambox7000]

Welches KAbel? DAs Flachband zur Festpaltte oder zum Modemport. Hab keine Ahnung wie man ein KAbel durch misst. Das wäre scheiße wenn am KAbel liegt, weil das gerade neu von HAllenberg kommt. Dann wäre das schon das zweite Kabel was nicht stimmt

[Tommy]

Die Ursache heist dass das Interface keinen Interupt bekommt. Was wohl am Kabel liegen könnte. schon mal überprüft und durchgemessen?

Oder das "was anderes" den Interupt "entführt". Evtl. ist ja nur die Box im A....

[Gorcon]

Die Ursache heist dass das Interface keinen Interupt bekommt. Was wohl am Kabel liegen könnte. schon mal überprüft und durchgemessen?

Oder das "was anderes" den Interupt "entführt". Evtl. ist ja nur die Box im A....

Oder so...

[e30]

Moin Moin

IDE-Kabel mal getauscht?Hatte auch tolle Fehlermeldungen siehe

http://forum.tuxbox-cvs.sourceforge.net ... hp?t=46612


mit neuen Kabel alles OK.


viel Glück

[dreambox7000]

Welches ist das IDE-KAbel? Wenn es das zum Modemport ist. Dann ja ist getauscht

[Tommy]

Welches ist das IDE-KAbel? Wenn es das zum Modemport ist. Dann ja ist getauscht

... hat 40 bzw. 80 Adern

[Stingray]

Für den genannten Fehler hda: lost interrupt gibt es mehrere mögliche Fehlerursachen.

- Kein richtiger Kontakt zum Ram-Port
- Leiterbahnunterbrechung
- CPU defekt
- Kabel zum Modemport defekt.
- IDE-Interface durch falschen Einbau beschädigt.

usw.

Tu Dir und Deiner Box einen gefallen und laß das IDE-Interface professionell einbauen. Wenn Du nicht einmal das IDE-Kabel vom Modemportkabel unterscheiden kannst, wirst Du bei dem Einbau nicht sehr weit kommen.

Mann sollte auch selber wissen wann die eigenen Grenzen erreicht sind und rechtzeit aufhören.

[Tommy]

Mann sollte auch selber wissen wann die eigenen Grenzen erreicht sind und rechtzeit aufhören.

100% ACK

[dreambox7000]

Mit dem Einbau hab ich bestimmt kein Problem. Ich hab seit einem Jahr da nicht mehr weiter gemacht und hab kein plan wie man die KAbelbezeichnung ist. Sorry. Das Interface steckt richtig drauf. HAbe zur Sicherheit mal die Distanzhülsen weg gelassen, aber auch erfolglos. An der Platte liegt es nicht. Das ist schon die zweite mit der ich es ausprobiere. Das KAbel zum Modemport, hab ich letzes JAhr mal kontrolliert und mal vom Stecker entfernt und besser draufgesetzt. LEider auch ohne Erfolg. Hab jetzt letzte woche ein neues von HAllenberg bekommen. Und es sind noch immer genau die selben Fehler wie im letzten Jahr. Das Interface wird ja auch erkannt. Könnte noch mal mit dem Flachbandkabel von der Festplatte testen. Tausche das mal mit dem im PC

[Charles Darwin jun.]

Richtig...das Flachbandkabel zur Festplatte ist das IDE-KABEL!!!

[eule]

Das Interface wird ja auch erkannt. Könnte noch mal mit dem Flachbandkabel von der Festplatte testen. Tausche das mal mit dem im PC

Kannst dir die weiteren Tests spaaren. Dein Interface ist defekt, der Eingang für den Interrupt ist zerstört.

[dreambox7000]

na klasse. Kann man nach einem JAhr da noch was machen bei HAllenberg