Dbox2 Nokia 2chip Hilfe

[htc202020]

Moin zusammen,

habe einproblem und weis nicht genau wie es in den griff bekommen kann.
Also es handelt sich um eine Dbox 2 von nokia mit 2 chips mit der soft von Bmom 1.0. Bekomme immer diese meldung bei Bootma.
habe den ppcboot orden angelegt und die daten ppcboot dort ab gelegt.
zu den einstellungen:


RARP-Server starten Aus
BootP/Tftp-Server starten Ein
Bootfile für die Dbox C:\dbox\ppcboot
NFS-Server starten Aus
COM-Port öffnen Ein
Verbindungsgeschwindigkeit 9600

wwwwicache
icache is on
chorus 800000
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-80-f0
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17
BOOTP broadcast 18
BOOTP broadcast 19
BOOTP broadcast 20
BOOTP broadcast 21
BOOTP broadcast 22
BOOTP broadcast 23
BOOTP broadcast 24
BOOTP broadcast 25
BOOTP broadcast 26
BOOTP broadcast 27
BOOTP broadcast 28
BOOTP broadcast 29
BOOTP broadcast 30
BOOTP broadcast 31
BOOTP broadcast 32
BOOTP broadcast 33
BOOTP broadcast 34
BOOTP broadcast 35
BOOTP broadcast 36
BOOTP broadcast 37
BOOTP broadcast 38
BOOTP broadcast 39
BOOTP broadcast 40
BOOTP broadcast 41
BOOTP broadcast 42
BOOTP broadcast 43
BOOTP broadcast 44
BOOTP broadcast 45
BOOTP broadcast 46
BOOTP broadcast 47
BOOTP broadcast 48
BOOTP broadcast 49
BOOTP broadcast 50
BOOTP broadcast 51
BOOTP broadcast 52
BOOTP broadcast 53
BOOTP broadcast 54
BOOTP broadcast 55
BOOTP broadcast 56
BOOTP broadcast 57
BOOTP broadcast 58
BOOTP broadcast 59
BOOTP broadcast 60
BOOTP broadcast 61
BOOTP broadcast 62
BOOTP broadcast 63
BOOTP broadcast 64
BOOTP broadcast 65
BOOTP broadcast 66
BOOTP broadcast 67
BOOTP broadcast 68
BOOTP broadcast 69
BOOTP broadcast 70
BOOTP broadcast 71
BOOTP broadcast 72
BOOTP broadcast 73
BOOTP broadcast 74
BOOTP broadcast 75
BOOTP broadcast 76
BOOTP broadcast 77
BOOTP broadcast 78
BOOTP broadcast 79
BOOTP broadcast 80
BOOTP broadcast 81
BOOTP broadcast 82
BOOTP broadcast 83
BOOTP broadcast 84
BOOTP broadcast 85
BOOTP broadcast 86
BOOTP broadcast 87
BOOTP broadcast 88
BOOTP broadcast 89
BOOTP broadcast 90
BOOTP broadcast 91
BOOTP broadcast 92
BOOTP broadcast 93
BOOTP broadcast 94
BOOTP broadcast 95
BOOTP broadcast 96
BOOTP broadcast 97
BOOTP broadcast 98
BOOTP broadcast 99
BOOTP broadcast 100
BOOTP broadcast 101
BOOTP broadcast 102
BOOTP broadcast 103
BOOTP broadcast 104
BOOTP broadcast 105
BOOTP broadcast 106
BOOTP broadcast 107
BOOTP broadcast 108
BOOTP broadcast 109
BOOTP broadcast 110
BOOTP broadcast 111
BOOTP broadcast 112
BOOTP broadcast 113
BOOTP broadcast 114
BOOTP broadcast 115
BOOTP broadcast 116
BOOTP broadcast 117
BOOTP broadcast 118
BOOTP broadcast 119
BOOTP broadcast 120
BOOTP broadcast 121
BOOTP broadcast 122
BOOTP broadcast 123
BOOTP broadcast 124
BOOTP broadcast 125
BOOTP broadcast 126
BOOTP broadcast 127
BOOTP broadcast 128
BOOTP broadcast 129
BOOTP broadcast 130
BOOTP broadcast 131
BOOTP broadcast 132

und das geht immer so wieter habe es mal ne stunden laufen lass aber nix passiert.
wie kann ich den befehl cp 10000000 01000000 1000 ausführen ???

[jmittelst]

Anleitung richtig lesen, verstehen und umsetzen...
http://wiki.tuxbox-cvs.sourceforge.net/ ... el_bmon1.0

Beachten: Prozedur NUR für Nokia 2xIntel Bmon1.0

Beachten: ppcboot ist dort verlinkt!

Beachten: Readme des Bootmanagers und den Artikel "Probleme beim Flashen" im Wiki.

cu
Jens

[SoLaLa]

Any key druecken um das Flashing abzubrechen.. : 0

und an der Stelle ruhig mal ne Taste drücken bevor das auf 0 runtergezählt ist, das hilft ungemein