Seit dem Einbau des Interfaces habe ich mit häufigen Abstürzen meiner Nokia D-Box zu kämpfen.
Die Abstürze passieren nicht nach bestimmten Laufzeiten und können auch direkt nacheinander auftauchen.
Ich habe schon alle Einstellungen das Interface betreffend getestet, allerdings ohne Besserung.
Die Spannungsversorgung habe ich auch bereits mit den anzulötenden Kabeln realisiert. Keine Besserung.
Ein Hitzeproblem scheidet ebenfalls aus, da die Festplatte momentan außerhalb der Box liegt und diese offen ist.
Wenn die Box mal läuft kann ich ohne Probleme auf die Festplatte aufnehmen und auch davon abspielen.
Hier zuerst einmal das Bootlog:
Code: Alles auswählen
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.07.03 20:31:40 =~=~=~=~=~=~=~=~=~=~=~=
Âdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: write to io reset reg failed, rc -5
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 00-00.00.00.40.00.00-00
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Mar 31 2008 - 00:41:35)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . . | / . - \ | / . - \ done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670145 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670081 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (image@Server) (gcc version 3.4.6) #18 Mo Mär 31 00:42:06 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:0f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-03-31 00:46:12 CEST)
##### Image-Version: Keywelt_Mar2008_V2 #####
Mon Mar 31 01:01:00 UTC 2008
Starting MMC-Support
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $
mmc2: Hardware init
mmc: Card init
mmc: Card init *OK1*
mmc: Card init *OK2*
mmc: Media found Size = 14560, hardsectsize = 512, sectors = 29120
Partition check:
mmca: p1
MMC mounted on /mnt/mmc
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38a2000
Probing IDE interface ide0...
hda: WDC WD1200BEVE-00UYT0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
warte auf 'init_ide'
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 104380k swap-space (priority -1)
Journalled Block Device driver loaded
warte auf 'init_ide'
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
setting drive write-caching to 1 (on)
setting standby to 72 (6 minutes)
write-caching = 1 (on)
acoustic = 128 (128=quiet ... 254=fast)
'init_ide' fertig
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/avia_av_sptsfix.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_av: AVIA500 sptsfix is on
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/24 19:14:50 dbt Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 2 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 252 start
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.409k 2008/03/27 16:17:45 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/plugins/operations camd_start
/tmp/currentservices.xml: No such file or directory
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd2
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[camd] ca system id: 1722
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] registering as event client
[controld] format: 16:9
SPTS, queue 0 extended.
[CBasicClient] connect failed: /tmp/camd.socket
avia_gt_core: masking unhandled irq reg 1 bit 15
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock01
/tmp/camd.sock01: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
Code: Alles auswählen
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.07.03 20:37:24 =~=~=~=~=~=~=~=~=~=~=~=
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C38DD3F0 XER: 20000000 LR: C38DD3F0 SP: C013B5B0 REGS: c013b500 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c0139910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C38DD3F0 C013B5B0 C0139910 C3BA451B C3AAFF01 00000000 C3BA4540 37233030
GPR08: BA91F2EB C3981000 00000000 C000B574 C3920000 10028470 01FFAB00 00000001
GPR16: FFFFFFFF 007FFF00 01FF5238 00000000 00001032 0013B7E0 C3B9A0E4 C0002AA0
GPR24: C3BA4014 00000029 00000012 C3B9C0F4 C3AAFED8 000000B8 C3BA5074 C3BA4000
Call backtrace:
C38DD3F0 C38DD6A8 C3B9A7F0 C39137C4 C00149DC C00169B4 C001507C
C0014EE4 C0014AA0 C0003C24 C0002AA0 C0004338 C0004354 C014B408
C0002138
PCR discontinuity: PCR: 0x046FC9479, OLDPCR: 0x046FB8427, Diff: 69714
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..Âdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Mar 31 2008 - 00:41:35)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . . | / . - \ | / . - \ done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670145 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670081 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (image@Server) (gcc version 3.4.6) #18 Mo Mär 31 00:42:06 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:0f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-03-31 00:46:12 CEST)
##### Image-Version: Keywelt_Mar2008_V2 #####
Mon Mar 31 01:01:00 UTC 2008
Starting MMC-Support
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $
mmc2: Hardware init
mmc: Card init
mmc: Card init *OK1*
mmc: Card init *OK2*
mmc: Media found Size = 14560, hardsectsize = 512, sectors = 29120
Partition check:
mmca: p1
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
MMC mounted on /mnt/mmc
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38a2000
Probing IDE interface ide0...
hda: WDC WD1200BEVE-00UYT0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
warte auf 'init_ide'
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 104380k swap-space (priority -1)
Journalled Block Device driver loaded
warte auf 'init_ide'
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
setting drive write-caching to 1 (on)
setting standby to 72 (6 minutes)
write-caching = 1 (on)
acoustic = 128 (128=quiet ... 254=fast)
'init_ide' fertig
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/avia_av_sptsfix.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_av: AVIA500 sptsfix is on
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/24 19:14:50 dbt Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 2 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 252 start
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.409k 2008/03/27 16:17:45 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/plugins/operations camd_start
/tmp/currentservices.xml: No such file or directory
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd2
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] ca system id: 1722
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] registering as event client
[controld] format: 16:9
SPTS, queue 0 extended.
[CBasicClient] connect failed: /tmp/camd.socket
avia_gt_core: masking unhandled irq reg 1 bit 15
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock01
/tmp/camd.sock01: No such file or directory
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[sectionsd] getUTC: read: Connection timed out
[timeThread] - 03.07.2008 20:46:17, tim: Thu Jul 3 20:46:17 2008
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
18:46:40.028 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:42.115 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:44.336 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:46.484 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:48.670 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:50.791 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:52.977 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:55.136 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:57.136 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:46:59.562 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:01.826 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:03.959 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:06.153 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:08.391 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:10.460 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:12.603 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:14.766 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:16.835 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:19.324 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:21.428 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:23.614 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:25.735 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:29.110 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:31.497 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:33.630 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
18:47:35.699 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00000590 XER: 00000000 LR: C3B9A18C SP: C013B4D0 REGS: c013b420 TRAP: 1000 Not tainted
MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0139910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00000000 C013B4D0 C0139910 C013B4E0 00000000 00000044 C3BA4018 04450001
GPR08: 78610B79 C3981000 00000000 C000B574 C3920000 10028470 01FFAB00 00000001
GPR16: FFFFFFFF 007FFF00 01FF5238 00000000 00001032 0013B4D0 C000B598 00009032
GPR24: 00000005 000000B7 00000012 C3B9C0F4 C3BA4014 00000044 C3AB4ECD C3BA4000
Call backtrace:
C0002AA0 00000000 C38DD19C C38DD6A8 C3B9A8D8 C39137C4 C00149DC
C00169B4 C001507C C0014EE4 C0014AA0 C0003C24 C0002AA0 C0004338
C0004354 C014B408 C0002138
PCR discontinuity: PCR: 0x04BDE4F4E, OLDPCR: 0x04BDD35FD, Diff: 72017
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..Âdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Mar 31 2008 - 00:41:35)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . . | / . - \ | / . - \ done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670145 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670081 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (image@Server) (gcc version 3.4.6) #18 Mo Mär 31 00:42:06 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:0f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-03-31 00:46:12 CEST)
##### Image-Version: Keywelt_Mar2008_V2 #####
Mon Mar 31 01:01:00 UTC 2008
Starting MMC-Support
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $
mmc2: Hardware init
mmc: Card init
mmc: Card init *OK1*
mmc: Card init *OK2*
mmc: Media found Size = 14560, hardsectsize = 512, sectors = 29120
Partition check:
mmca: p1
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
MMC mounted on /mnt/mmc
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38a2000
Probing IDE interface ide0...
hda: WDC WD1200BEVE-00UYT0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
warte auf 'init_ide'
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 104380k swap-space (priority -1)
Journalled Block Device driver loaded
warte auf 'init_ide'
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
setting drive write-caching to 1 (on)
setting standby to 72 (6 minutes)
write-caching = 1 (on)
acoustic = 128 (128=quiet ... 254=fast)
'init_ide' fertig
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/avia_av_sptsfix.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_av: AVIA500 sptsfix is on
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45º¦z‰¥ÂExp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/24 19:14:50 dbt Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 2 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 252 start
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.409k 2008/03/27 16:17:45 Kroki & Worschter & SnowHead Exp $
/var/plugins/operations cardserver_start
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/plugins/operations camd_start
/tmp/currentservices.xml: No such file or directory
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd2
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] ca system id: 1722
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] registering as event client
[controld] format: 16:9
SPTS, queue 0 extended.
[CBasicClient] connect failed: /tmp/camd.socketavia_gt_core: masking unhandled irq reg 1 bit 15
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock01
/tmp/camd.sock01: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
[timeThread] - 03.07.2008 21:01:28, tim: Thu Jul 3 21:01:28 2008
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
19:01:43.329 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:45.465 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:47.497 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:49.767 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:51.967 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:54.125 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:56.220 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:01:58.376 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:00.537 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:02.559 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:04.975 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:07.186 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:09.321 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:11.526 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:13.895 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:15.949 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:18.082 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:20.235 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:22.275 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:24.743 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:26.852 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:29.034 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:31.103 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:34.623 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:36.850 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:38.990 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
19:02:41.059 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x60 mask 0xf0
Oops: kernel access of bad area, sig: 11
NIP: 0A054860 XER: 60006175 LR: 6DFC7A69 SP: 000000B8 REGS: c013b5a0 TRAP: 0400 Not tainted
MSR: 41406920 EE: 0 PR: 1 FP: 1 ME: 0 IR/DR: 10
TASK = c0139910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C3AB48A4 000000B8 C3BA5074 C3BA4000 C013B5E0 C38DD4F4 00000000 C0002AA0
GPR08: C0003B64 C3920000 00000012 C3BA4000 00000758 C3B9BFE8 00000009 C3AB4960
GPR16: C013B600 C38DD6A8 00000F6C C391B9D0 00000012 C1C723F0 00000814 C391B9D0
GPR24: C013B6F0 C3B9A8D8 00009032 C0139910 47001212 05000055 0000554D 39646575
Call backtrace:
PCR discontinuity: PCR: 0x056A98ACF, OLDPCR: 0x056A8B7F7, Diff: 53976
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..Wäre toll wenn mir jemand einen Tip zur Lösung des Problems geben könnte.
so ein LOG habsch auch noch nie gesehen....Hammer.....wasn Müll.......also wenn es probleme macht...einfach mal