box: philips enx
Code: Alles auswählen
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'F/cygwin/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685337 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (xxxxxx) (gcc version 3.0.4) #1 Sat Apr 13 20:57:03 200
2
Boot arguments: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.1.1:F/cy
gwin/dbox2/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.1.1
:F/cygwin/dbox2/cdkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30412k available (1248k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20104kB/6701kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2b:01:20
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.1.1, my address is 192.168.1.5
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.1.1
Looking up port of RPC 100005/2 on 192.168.1.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.60.2 (2002.04.13-17:22+0000) multi-call [b]Bad inittab en
try: ::restart:/sbin/init[/b]Setting hostname
Mounting anything
Starting inetd
Loading modules
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
DEMOD: TDA8044H
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
mice: PS/2 mouse device common for all mice
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 1
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
write 1 event's ...
write 1 event's ...
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 2).
CAM: attached to adapter
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 3).
registering device.
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
registering frontend...
avia_gt_core: $Id: avia_gt_core.c,v 1.3 2002/04/12 21:29:35 Jolt Exp $
avia_gt_core: Unsupported chip type (chip_type = -1)
/lib/modules/2.4.2/misc/avia_gt.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/avia_gt.o: [b]insmod /lib/modules/2.4.2/misc/avia_gt.o fail
ed[/b]
avia_gt_core: $Id: avia_gt_core.c,v 1.3 2002/04/12 21:29:35 Jolt Exp $
avia_gt_core: Unsupported chip type (chip_type = -1)
/lib/modules/2.4.2/misc/avia_gt.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/avia_gt.o: [b]insmod /lib/modules/2.4.2/misc/avia_gt.o fail
ed[/b]avia_gt_core: $Id: avia_gt_core.c,v 1.3 2002/04/12 21:29:35 Jolt Exp $
[b]avia_gt_core: Unsupported chip type (chip_type = -1)[/b]/lib/modules/2.4.2/misc/avia_gt.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/avia_gt.o: [b]insmod /lib/modules/2.4.2/misc/avia_gt.o fail
ed[/b]/lib/modules/2.4.2/misc/avia_gt.o: Can't locate module graphic_pcm
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
sync: 00
sync: 00
[timerd] startup
$Id: sectionsd.cpp,v 1.113 2002/04/12 15:47:27 field Exp $
caching 96 hours
events are old 60min after their end time
[sectionsd ] checking timerd
[sectionsd ] timerd available
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.125 2002/04/11 16:30:08 obi Exp $
cp: /var/tuxbox/config/zapit/last_chan: No such file or directory
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
oder wird enx etwa nicht unterstuetzt???
Code: Alles auswählen
avia_gt_core: Unsupported chip type (chip_type = -1)
(aber ziemlich wackelig...)
