ich habe bei meinem vater aus dem keller eine alte Dbox 2 Nokia Sat mit 2 intel und Avia 600l
habe Neues Image drauf gemacht mit senderliste.
Fast alle sender lassen sich nicht an schauen.
Eins Extra, Phönix, und noch ein paar TPV von den freien funktionieren von den verslüßelten kann ich nicht sagen habe keine karte (noch nicht)
Habe die spannung die aus dem tuner kommt gemessen ohne last 19,4 und 25,3
such lauf gemacht und er findet nur Sender sagt aber das es 84 Transponder sind
Bootlog ist vom Start bis zu dem zeitpunkt als sender suchlauf beendet ist.
îdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-bf.ad.42.07.00.00-5c
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 171660
verify sig: 262
Branching to 0x40000
U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....

env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................

Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671052 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.6-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670988 Bytes = 655.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14
:37:12 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:87:78
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
mount: using /etc/fstab
##### Image-Version: Keywelt_Sep2009_V1 #####
Sat Sep 26 14:57:00 UTC 2009
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
dbox2_fp_input was compiled for kernel version 2.4.37-dbox2
while this kernel is version 2.4.37.6-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
insmod: warning: kernel-module version mismatch
multicam was compiled for kernel version 2.4.37-dbox2
while this kernel is version 2.4.37.6-dbox2
DBox2 Multicam Driver v1.01 skars & doz21

starting pid 171, tty '': '/etc/init.d/start'
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.306 2009/09/
14 13:33:28 seife Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead
Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/plugins/operations camd_start
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /
lib/liblcddisplay.so.0)
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
starte capmtserver
capmtserver provides pmt info, for non-enigma platforms
starte CCcam
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no
[neutrino] received 29 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[sectionsd] getUTC: read: Connection timed out
avia_gt_core: masking unhandled irq reg 0 bit 6
[zapit] tuned frequency does not match request. difference: -1031
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
16:57:51.427 [timeThread] - 06.08.2010 22:47:52, tim: Fri Aug 6 22:47:52 2010
22:47:52.031 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
22:47:53.139 dmxSDT: going to sleep...
22:47:53.284 eit_set_update_filter, servicekey = 0x41b00017031, current version
23
22:48:47.145 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:48:50.261 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:48:53.224 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:48:55.929 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:00.861 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:03.692 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:06.997 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:09.699 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:14.405 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:17.073 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:20.809 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:23.348 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:27.822 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:30.225 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:35.615 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:41.138 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:43.639 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:49.821 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:49:54.511 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:50:08.028 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] f
ilter 0x60 mask 0xf1
22:50:20.123 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] f
ilter 0x61 mask 0xf1
22:50:29.221 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] f
ilter 0x61 mask 0xf1
22:50:37.756 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] f
ilter 0x61 mask 0xf1
22:50:56.281 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] f
ilter 0x61 mask 0xf1
23:00:20.290 EIT Update Filter: Activate cnThread
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
23:00:45.859 eit_set_update_filter, servicekey = 0x41b00017031, current version
25
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[neutrino] TP_scan 0 TP_freq TP_rate TP_fec 1 TP_pol 0 TP_mod 6 TP_diseqc 0
error while loading palette: /share/tuxbox/neutrino/icons/scan.pal
error while loading icon: /share/tuxbox/neutrino/icons/scan.raw
[scan.cpp] executing /var/tuxbox/config/scan.start.
****************************
* deaktiviere kw-keepalive *
****************************
re-starting /bin/sectionsd
[sectionsd] starting '/bin/sectionsd'
$Id: sectionsd.cpp,v 1.306 2009/09/14 13:33:28 seife Exp $
[sectionsd] getting configuration from environment, starting paused
GETENVI(auto_scanning) = 0
GETENVL(secondsToCache) = 345600
GETENVL(oldEventsAre) = 7200
GETENVL(secondsExtendedTextCache) = 43200
GETENVI(max_events) = 1500
GETENVI(ntprefresh) = 30
GETENVI(ntpenable) = 0
GETENVS(ntp_system_cmd) = /sbin/rdate -s time.fu-berlin.de
GETENVS(epg_dir) =
GETENVB(update_eit) = 1
GETENVB(bTimeCorrect) = 0
GETENVI(debug) = 0
[sectionsd] Caching max 1500 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
PCR discontinuity: PCR: 0x0D6CC6FDF, OLDPCR: 0x0D6CAE464, Diff: 101243
[scan] scanning now: Astra 19.2E
[scan] currentSatellitePosition = 192, scanSatellitePosition = 192
[scan] motorPosition = 0
[getservices] loading motor positions...
[getservices] motor.conf not found.
[getservices] dup transponder id 41B onid 1
[getservices] dup transponder id 423 onid 1
[getservices] dup transponder id 427 onid 1
[getservices] dup transponder id 407 onid 1
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 1 onid 85
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[zapit] LOCK LOST! trying rezap... channel: 'EinsExtra'
zap failed!
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[zapit] LOCK LOST! trying rezap... channel: 'EinsExtra'
[zapit] tuned frequency does not match request. difference: -859
PES, queue 0 normal.
[zapit] tuned frequency does not match request. difference: -859
PES, queue 0 normal.
[scan.cpp] executing /var/tuxbox/config/scan.end.
23:15:58.448 [timeThread] - 06.08.2010 23:15:57, tim: Fri Aug 6 23:15:57 2010
23:15:57.004 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
23:15:58.140 dmxSDT: going to sleep...
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
23:16:09.721 eit_set_update_filter, servicekey = 0x41b00017032, current version
15
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (16:9 -> 4:3)
23:16:14.203 eit_set_update_filter, servicekey = 0x41b00017033, current version
23
PES, queue 0 normal.
avia_gt_dmx: queue 3 overflow (count: 1)
PES, queue 0 normal.
avia_gt_dmx: queue 3 overflow (count: 1)
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
23:16:20.973 eit_set_update_filter, servicekey = 0x41b00017035, current version
24
PES, queue 0 normal.
avia_gt_dmx: queue 3 overflow (count: 1)
23:16:23.339 eit_set_update_filter, servicekey = 0x41b00017036, current version
17
[zapit] tuned frequency does not match request. difference: -859
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 544x576 (16:9 -> 4:3)
Kann mir jemand hlefen habe keine ahnung wie es was zu machen ist