Hilfee...Box stürzt bei Transponderscan ab

[guldeweg]

Hallo,
habe mir das neuste 24.04 er Image auf meine Sagem gebraten und bei dem Transponderscan stürzt immer die Box ab und schaltet sich aus....ich weiss keinen Rat, kann mir jemand nen Tip geben??

Gruss

Guldeweg

[Coronas]

Abwarten und Tee trinken.

[somemon]

geht mir auch so. scheint wohl ein bug in der enigma zu sein.
abwarten und tee trinken wird wohl das richtige sein

[Coronas]

In dem Moment, wo Enigma prüft, ob Astra noch da ist (Schritt 2/4), schmiert das System ab. Die neuen Avia-Treiber? Who knows. Hier der
Konsolenoutput - ich weiss ja nicht, ob's hilft:

event: init ...
Init VES1820 / VES1893
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
der moment ist gekommen...
write 1 event's ...
write 1 event's ...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
registering device.
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
event0: Event device for input0
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
registering frontend...
avia_gt_core: $Id: avia_gt_core.c,v 1.12 2002/04/24 08:17:42 obi Exp $
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.11 2002/04/22 19:50:25 Jolt Exp $
avia_gt_gv: $Id: avia_gt_gv.c,v 1.8 2002/04/24 08:01:00 obi Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.11 2002/04/22 17:40:01 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.16 2002/04/23 00:11:10 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.16 2002/04/24 09:08:57 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_dmx: $Id: avia_gt_dmx_core.c,v 1.79 2002/04/22 17:40:01 Jolt Exp $
gtx-dmx: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.7 2002/04/23 00:10:44 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA GTX/DMX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.25 2002/04/22 17:40:01 Jolt Exp $
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2
+ (0) Configuration
+ (1) d-Box LCD Hardware
+ (1) gRC
+ (1) GFBDC
1024k video mem
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth not supported
+ (1) Font Render Class
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/unmrs.pfa...OK (NimbusSansL-Regular Sans L Regul
ar)
[FONT] adding font /share/fonts/Marlett.ttf...OK (Marlett Regular)
[FONT] Intializing font cache, using max. 4MB...
+ (1) eActionMapList
+ (1) RC Input layer
+ (2) skin subsystem
[1497] /share/tuxbox/enigma/pictures/crypt_on.png: 17x21x8 png, 3
[0112] /share/tuxbox/enigma/pictures/format_on.png: 37x18x8 png, 3
[0103] /share/tuxbox/enigma/pictures/dolby_on.png: 25x15x8 png, 3
[0091] /share/tuxbox/enigma/pictures/dolby_off.png: 25x15x8 png, 3
[0053] /share/tuxbox/enigma/pictures/crypt_off.png: 17x21x8 png, 3
[0037] /share/tuxbox/enigma/pictures/format_off.png: 37x18x8 png, 3
[0069] /share/tuxbox/enigma/pictures/enigma2.png: 120x20x8 png, 0
[0073] /share/tuxbox/enigma/pictures/lcdmenu.png: 120x3x8 png, 0
[0064] /share/tuxbox/enigma/pictures/video.png: 112x38x8 png, 0
+ (2) DreamBox RC Hardware
failed to open /dev/rawir
+ (2) d-Box RC Hardware
+ (3) eWindow
+ (3) eWidget
+ (3) eProgress
+ (3) eListbox
+ (3) eLabel
+ (3) eCheckbox
+ (3) eButton
+ (3) stream watchdog
set event: 00000008
+ (4) eDVB core
FreqOffset = 0
instance: 0x100710a0
[0398] setInput 0, fd=12
[0034] Aratio changed

SWITCH LETTER BOX
eDVB::eDVB .
+ (5) EPG cache
[EPGC] Initialized EPGCache
+ (5) enigma Actions
reached rl 5
[0155] <-- network
skin has undefined element: enigma_logo
skin has undefined element: lcd_scart
[0419] [PROFILE] eZapMain
[FONT] FTC_Face_Requester (NimbusSansL-Regular Sans L Regular)
[0247] <-- show lcd.
skin has undefined element: volume_bar
[0031] ...
[0037] <-- clockUpdate
[0021] <-- service selector
[0018] [ENIGMA] starting httpd
[0044] [NET] httpd server started on port 80
[0021] [ENIGMA] ok, beginning mainloop
reached rl 10
[TUNE] tuning to 12422000/27500000/H/3@0
------------> changed! 0
Oops: kernel access of bad area, sig: 11
NIP: 68C1A6BC XER: E000C86F LR: 68C1A6BE SP: C1A6BBE0 REGS: c1a6bb30 TRAP: 0400
MSR: 08209032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a6a000[69] 'enigma' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 68C1A6BE C1A6BBE0 C1A6A000 00000000 C0175208 00000001 C1A6BBC0 00000000
GPR08: C01131D8 C3870000 C3850000 FF000860 95355533 10063A50 01FE7600 01F9FB88
GPR16: FFFFFFFF 00000000 7FFFFD08 10060400 00009032 01A6BE80 00000000 C0002718
GPR24: C0002440 00000000 6CC38A38 F0C00AA2 98000000 00C1CBA7 30C1CBA7 30C38A7A
Call backtrace:
68C1A6BE
Segmentation fault

The system is going down NOW !!
Sending SIGTERM to all processeNode read from 0002b9a0: node_crc f09baae5, calcu
lated CRC f09baae5. dsize 3, csize 3, offset 0, buf c01fc8a0
Read 3 bytes to c01fc8a0
Data CRC matches calculated CRC d3aea45a
Sending SIGKILL to all processes.
jffs2_garbage_collect_thread(): SIGKILL received.
CXA2092 found
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt

[Hebwar]

Das macht bei mir nicht nur Enigma... Neutrino kackt auch immer ab Warten wir einfach mal ab.... bin jetzt eh in Urlaub .... wer braucht da schon nen Kanalliste

Nokia 2XI Avia500 Bmon1.0 Kabel

[DBOX1/2]

Ist bei mir leider auch so! Schritt 2/4 box geht aus.
Bei neutrino kommt nach einem Neustart auch nichts mehr.