bis vor einigen Tagen konnte ich auf meine NOKIA Sat 2xI ohne Probs neue Images aufspielen. Jetzt funktioniert es nicht mehr, egal welches Image.
Hier mal das Log(ist sehr lang, aber alles nur von EINEM Flash-Vorgang):
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-79.cd.19.07.00.00-2c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.5
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1e-51-3e
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux versiodebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-79.cd.19.07.00.00-2c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.5
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1e-51-3e
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.1:C/Programme/c
dkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.1:C/Progra
mme/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:1e:51:3e
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.1.1, my address is 192.168.1.5
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.1.1
Looking up port of RPC 100005/2 on 192.168.1.1
VFS: Mounted root (nfs filesystem).
Warning: unable to mount devfs, err: -2
Freeing unused kernel memory: 68k init
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000207F LR: 00001032 SP: C0231E80 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C0231E80 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C0231DF0 00000002 00031B58 01FE7100 01F9FBF0
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FE03B8 01F9FFC0 01FA0038 000000F8
GPR24: 00000000 00100040 01FE770C 007FFF47 007FFF00 FFFFFFFF C0134228 C0134200
Call backtrace:
C000207F C0008FF0 C000EEB0 C0002414 C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000207F LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0230000[1] 'swapper' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C0230000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009D38 C0267060 C1F9FE30 00000002 00031B58 01FE7100 01F9FBF0
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 01FE770C 007FFF47 00000008 FFFFFFFF C0230000 C1F9FFD0
Call backtrace:
C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0
C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C C0002E7C
C0002718 C000F584 C00054F0 C000291C C0002E7C C0002718 C000F584
C00054F0 C000291C C0002E7C C0002718 C000F584 C00054F0 C000291C
C0002E7C C0002718 C000F584 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
Hat jemand nen Tipp für mich?
Matz