Compilierte Version von ezap 1.0RCbeta3

[hotdog67]

Hi,
da Ich leider kein Linux benutze und somit keinen Crosscompiler habe, bräuchte ich fertige binarys zum testen.
Wäre jemand so freundlich mir die letzte Version RCbeta3 fertig compiliert zu mailen?

Vielen Dank im vorraus

hotdog67

[Intruder73]

Du hast Post!

[Sat_Fan]

Joh, RC3 ist echt der Hammer!

[hotdog67]

Nach Einbindung in die pre ezap Umgebung (Juli2001) führt die dbox nach Aufruf des ezap-progs einen kill sigterm aus und die box ist aus.

In welcher Yadd lasst Ihr das Prog laufen und wie sehen die Entsprechenden rcS-Eintäge aus?

[Papabaer]

@Intruder73:
haette auch gerne post <IMG SRC="/forum/images/smiles/icon_wink.gif">

nkp052000@gmx.net

[Rambock]

Kann mir auch bitte einer die RC3 zusenden

Vielen Dank für die Mühe

Cu Rambock

bbw.fan@bigfoot.com

[hotdog67]

Nach Einbindung in neueste Yadd und löschen aller Neutrinoeinträge in der rcS sieht der log folgendermassen aus

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-7e.fd.ce.05.00.00-e5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.136.2, My IP 192.168.136.3
debug: Sending TFTP-request for file D/dbox/ezap/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 221949
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Sep 17 2001 - 23:45:29)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-11-ca-37
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.136.2; our IP address is 192.168.136.3
Filename 'D/dbox/ezap/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1C20 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.136.2; our IP address is 192.168.136.3
Filename 'D/dbox/ezap/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x8247A (0xDDD2 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: tiab
3: flash
4: test2
Select image (1-4), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.136.2; our IP address is 192.168.136.3
Filename 'D/dbox/ezap/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.136.2:D/dbox/ezap
/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.136.2:D/dbox
/ezap/cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:11:ca:37
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
0: offset=0x0,size=0x4000,blocks=8
1: offset=0x20000,size=0x20000,blocks=63
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.136.2, my address is 192.168.136.3
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.136.2
Looking up port of RPC 100005/2 on 192.168.136.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.07.23-21:34+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Lade emlog
Starting klogd
Starting syslogd
Starting inetd
Setting hostname
Lade module
Lade i2c-core
i2c-core.o: i2c core module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: 7a
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1820
Lade soundcore
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade gtx_core
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1820
i2c-core.o: driver VES1820 DVB DECODER registered.
ves1820.o: feID: 1820 7a
ves1820.o: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
ves1820.o: init chip
ves1820.o: pwm=00
using QAM
Lade gtx_dmx
gen_dmx: found gtx
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
Setting up loopback device
Echo: applet not found
EliteDVB is (c) 2001 by Felix Domke <tmbinc@gmx.net>.
It is strictly forbidden to take *ANY* money for this software in *ANY*
form. This includes getting money or goods for installing this soft on a
receiver. The only legal way to install this software is to do it by YOURSELF
using the well-known tools like the dbox2-bootmanager by field (dbox.feldtech.co
m)
Software license is NOT NECESSARY GPL!!!
Off course MODIFYING BINARY IMAGES is FORBIDDEN!
You might modify the source, but all patches have to be open-sourced
couldn't open LCD - load lcd.o!

Danach ist Schluss
sorry für das lange log

[Intruder73]

versuch doch mal nen >modprobe lcd< vor dem Aufruf von ezap ...

[reloop]

könnt ihr mir des bitte auch schicken!?

big thx

reloop@reloop.org

[Rambock]

Hallo Intruder73

Merci für die schnelle Post

Danke

cu Rambock

[mediom]

könnte mir auch einer bitte ezap mailen

thx
mediom@gmx.at

[hotdog67]

Ein modul lcd ist bei mir leider nicht vorhanden.
Auf den Befehl "modprobe lcd" kommt die Antwort:
modprobe: Can't locate module lcd
Echo: applet not found

[hotdog67]

Modprobe war anscheinend falsch,
"insmod lcd" hat geholfen

[tommy123]

Waere echt super wenn mir auch jemand das compilierte ezap per e-mail schicken koennte <IMG SRC="/forum/images/smiles/icon_smile.gif">

t.hellmann@gmx.de

[Flagg]

ich hätts auch gerne <IMG SRC="/forum/images/smiles/icon_smile.gif">

spam2001@gmx.de

danke schon mal.

[trancer]

Hi Leuts!

Wäre echt nett wenn mir jemand auch die neue version zu senden könnte (kompiliert).

Danke schon mal im Voraus!

-> trancer@gmx.net

[c3po2001]

Hi,

für mich auch bitte ! <IMG SRC="/forum/images/smiles/icon_smile.gif">

[ericcartman2]

Ich hätte das compilte ezap auch gern.

Thx im Vorraus
Eric <IMG SRC="/forum/images/smiles/icon_smile.gif">

[Metatron]

Kannst du mir die kompilierte Version auch mailen?
m3t4tron@yahoo.de