debug-problem bei sagem

[Siegi207]

moin alle!

habe ein problem mit sagem 1xI
verbindung zwischen box und pc ist da
nach ausführen von "enable_debug mit minflsh"

COM Fenster
DebugEnabler (c) tmbinc,gillem +(sagem/13,amd,philips) 1.8beta
blversion : 1.2
produck? at : 10000904
current state : locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : 000000AA - FAILED!!!

Please reset now!

RSH Fenster
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
> umount /
> mount 192.168.100.2:C/minflsh/ /
C_INIT: mount 192.168.100.2:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 21 sec, 880000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 25 sec, 360000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 26 sec, 960000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 28 sec, 860000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 30 sec, 360000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 31 sec, 960000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 33 sec, 860000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 35 sec, 360000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 36 sec, 970000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 39 sec, 70000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 40 sec, 970000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Command timed out - didn't get answer from DBox!
! Execution stopped!



danach immer noch nicht im debug

kann mir einer noch einen tip geben wo der fehler noch liegen kann

cu siegi

[Dietmar]

unprotecting : 000000AA - FAILED!!!

Du hast den Schreibschutz nicht aufgehoben.
Evtl. hatte die Brücke keinen richtigen Kontakt. (Da ist Lack auf der Platine)

[Siegi207]

Danke für deine hilfe es war doch nur eine kontaktfrage
hoffe das es jetzt ohne problem weiter klapt

cu siegi