Neutrino Kanalscan

[Cable Guy]

Hi

gestern hab ich mich nicht ''getraut'' zu posten weil ja Feedback zu den Snapshots nicht so gern gesehen wird und ''ihr'' (Devels) auch Kabelboxen habt

aber nu wollt ich doch mal vorsichtig anmerken (könnte ja sein, daß ihr es nicht bemerkt habt), das man unter Neutrino keinen Kanalscan mehr machen kann (Snapshot YADD 29.08. & 30.08.), mit der YADD vom 28.08. war noch alles ok

unter Enigma und Lcars funktioniert der Scan

mit eigenen Settings ist alles empfangbar, nur nicht zu Scannen

man kann auch nicht zwischen zB. Telekom oder Cable BF Slow wechseln

Ps. keine Kritik nur kleiner Hinweis

YADD 30.08.


$Id: ves1820.c,v 1.32 2002/08/19 22:53:13 Homar Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.93 2002/08/25 09:38:26 wjoost Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_napi: hardware section filtering enabled.
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.53 2002/08/22 09:24:15 obi Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] 1.CMD-Class 0xE0
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1722
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: zapit.cpp,v 1.206 2002/08/30 14:04:08 thegoodguy Exp $

/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
[getservices.cpp] /var/tuxbox/config/zapit/services.xml: No such file or directo
ry
[zapit] error parsing services!
Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.309 2002/08/29 21:59:32 dirch Exp $

[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] menue setup
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
zapitclient: connect: Connection refused
udhcp client (v0.9.6) started
couldn't create raw socket -- au revoir
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused

YADD 28.08.

$Id: ves1820.c,v 1.32 2002/08/19 22:53:13 Homar Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.93 2002/08/25 09:38:26 wjoost Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_napi: hardware section filtering enabled.
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.53 2002/08/22 09:24:15 obi Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] 1.CMD-Class 0xE0
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.199 2002/08/27 15:50:33 obi Exp $

/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
[getservices.cpp] /var/tuxbox/config/zapit/services.xml: No such file or directo
ry
[zapit] error parsing services!
[camd] ca system id: 1722
[camd] card_country: TEL
[camd] card_number: 8002xxxxxx
[camd] card_version: 0384
Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

[camd] no card is in slot #2
[camd] a card is in slot #1
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.308 2002/07/26 14:06:58 McClean Exp
$

[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] enable flash
/var/tuxbox/config/neutrino.conf: No such file or directory
/var/tuxbox/config/scan.conf: No such file or directory
[neutrino] error while loading scan-settings, using defaults!
[neutrino] menue setup
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
saveing neutrino scan-config
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
udhcp client (v0.9.6) started
couldn't create raw socket -- au revoir
[zapit] set diseqc type 0
[zapit] set diseqc repeats to 0
[zapit] adding Telekom (diseqc 0)
[CFrontend::setFrontend] freq 346000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 346000
found new transponder(s) on 346000 6900000 0
[CFrontend::setFrontend] freq 450000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 450431
[sdt.cpp] read: Connection timed out
[nit.cpp] read: Connection timed out
no new transponder(s) in current nit
[CFrontend::setFrontend] freq 458000
[CFrontend::setFrontend] discard event
[CFrontend::getEvent] FE_COMPLETION_EV: freq 458000
[nit.cpp] read: Connection timed out
no new transponder(s) in current nit
[CFrontend::setFrontend] freq 402000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 402000
[scan.cpp] parsing sdt of tsid 0001, onid 0085
[CFrontend::setFrontend] freq 370000
[getMsgAbsoluteTimeout]: EVT_TIMESET - recalculate timeout
7f622f4/3a972de609903 - 3a972e65a8c6f/7f9f36c
[CFrontend::getEvent] FE_COMPLETION_EV: freq 370000
[scan.cpp] parsing sdt of tsid 0002, onid 0085
[CFrontend::setFrontend] freq 362000
[getMsgAbsoluteTimeout]: EVT_TIMESET - recalculate timeout
3a972e6793690/fffffffffffad001 - 3a972e677d709/3a972e67d0708
[CFrontend::getEvent] FE_COMPLETION_EV: freq 362000
[scan.cpp] parsing sdt of tsid 0003, onid 0085
[CFrontend::setFrontend] freq 378000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 378000
[scan.cpp] parsing sdt of tsid 0004, onid 0085
[CFrontend::setFrontend] freq 386000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 386000
[scan.cpp] parsing sdt of tsid 0005, onid 0085
[sdt.cpp] read: Connection timed out
[CFrontend::setFrontend] freq 354000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 354000
[scan.cpp] parsing sdt of tsid 0011, onid 0085
[CFrontend::setFrontend] freq 426000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 426000
[scan.cpp] parsing sdt of tsid 0431, onid 0001
[CFrontend::setFrontend] freq 394000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 394000
[scan.cpp] parsing sdt of tsid 0437, onid 0001
[CFrontend::setFrontend] freq 410000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 410000
[scan.cpp] parsing sdt of tsid 044d, onid 0001
[CFrontend::setFrontend] freq 434000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 434000
[scan.cpp] parsing sdt of tsid 2711, onid f001
[CFrontend::setFrontend] freq 346000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 346000
[scan.cpp] parsing sdt of tsid 2712, onid f001
[CFrontend::setFrontend] freq 442000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 442000
[scan.cpp] parsing sdt of tsid 2713, onid f001
[CFrontend::setFrontend] freq 113000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 113000
[scan.cpp] parsing sdt of tsid 2714, onid f001
[CFrontend::setFrontend] freq 121000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 121000
[scan.cpp] parsing sdt of tsid 2715, onid f001
[zapit] creating new bouquets.xml
[scan.cpp] found 14 transponders and 163 channels
[getservices.cpp] going to parse cable Telekom
[zapit] reading Bouquets ........
[zapit] Found 9 bouquets.
[scan.cpp] Channels have been loaded succesfully
[CFrontend::setFrontend] freq 402000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 402000
[camd] starting onid 0085 sid 0024
avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0024 status: 1d1d
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok

[Homar]

Hi Cable Guy,

Zur Zeit findet eine Umstellung und Bereinigung des Zapit-Codes statt.

Den Fehler habe ich auch bemerkt. Warte mal einige Tage ab und schau, ob es besser wird.

[Cable Guy]

n'abend Homar

thx erstmal

mfg

[Homar]

Jo Cable Guy,

... der Kabel-scan geht wieder

Im nächsten Snapshot wird es wieder drin sein.

[Cable Guy]

Hi Homar

yep funktioniert wieder thx

hab es gerade probiert, freue mich schon auf die neue Yadd

die Timerlist funktioniert auch, einzelne Timer löschen auch

''edit on''

nur umschalten tut der Timer (noch) nicht

''edit off''

mfg

[Cable Guy]

nu funktioniert alles wieder auch der Timer inkl. umschalten

mfg