DBOX2 Nokia 2*Intel im Debug kein System

Wie blitze ich ein Bild - Permanent Outgoing Incomes
icprog
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 22. September 2002, 19:04

DBOX2 Nokia 2*Intel im Debug kein System

Beitrag von icprog »

Habe meine Box auf Linux umgestellt,ein Image geflasht, die Box lief!!!!
Dann habe ich das Logo per ftp getauscht, nix geht mehr, Stecker raus ,Image neu geflasht, hat nicht geklappt, nach wenigen ###### stehengeblieben.Jetzt sieht mein Log so aus . Kann mir jemand weiterhelfen????
thanx
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-1a.7e.26.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.71.220, My IP 192.168.71.222
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-18-22-b5
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ###
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename 'C/PROGRAMME/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #################
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/WINDOWS/Desktop/PM_v225_2xI_gbox047/13.img
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename '/C/WINDOWS/Desktop/PM_v225_2xI_gbox047/13.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
####################################################################
rollorcs
Einsteiger
Einsteiger
Beiträge: 357
Registriert: Mittwoch 29. August 2001, 00:00

Beitrag von rollorcs »

"TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename '/C/WINDOWS/Desktop/PM_v225_2xI_gbox047/13.img'.
Load address: 0x120000 ""

Da liegt wohl ein Hardwaredefekt vor!

Gruß
icprog
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 22. September 2002, 19:04

Beitrag von icprog »

Und was jetzt???
Tom1069
Erleuchteter
Erleuchteter
Beiträge: 664
Registriert: Donnerstag 4. Juli 2002, 00:53

Beitrag von Tom1069 »

Vogelkacke in der Box :lol:
icprog
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 22. September 2002, 19:04

Beitrag von icprog »

So sieht das ganze aus wenn ich mit ppcboot boote
Flash auslesen geht Zurückflashen aber nicht wieso?????



***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:5A:0A:E6 Local IP: 192.168.71.220 (via Packet-Driver #2)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:18:22:B5 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\ppcboot"...
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 439 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\logo-lcd"...
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\logo-fb"...
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\kernel-cdk"...
TFTP> Non-BootP TFTP-transfer requested "c\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "c:\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1173 blocks
BootP> Answer sent!
1 - mountd: mount: path: c/dbox2/cdkroot/
1 - mountd: mount: path: c/dbox2/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply



debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-1a.7e.26.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.71.220, My IP 192.168.71.222
debug: Sending TFTP-request for file c/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-18-22-b5
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename 'c/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ###
done
LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename 'c/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #####
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.71.220; our IP address is 192.168.71.222
Filename 'c/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
####
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.71.220:c/dbox2/cd
kroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.71.220:c/dbo
x2/cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:18:22:b5
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.71.220, my address is 192.168.71.222
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.71.220
Looking up port of RPC 100005/2 on 192.168.71.220
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call

dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen

Please press Enter to activate this console.


BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

# help

Built-in commands:
-------------------
. : alias break builtin cd chdir continue eval exec exit export
false fc hash help jobs let local read readonly return set setvar
shift times trap true type ulimit umask unalias unset wait

#
icprog
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 22. September 2002, 19:04

Beitrag von icprog »

die Vogelkacke habe ich mit Absicht in die Box getan, wollte mal sehen ob sie lüppt!! Normalerweise konnte ich die Vogelkacke immer wieder entfernen, jetzt geht aben nichts mehr!

cu :P
rollorcs
Einsteiger
Einsteiger
Beiträge: 357
Registriert: Mittwoch 29. August 2001, 00:00

Beitrag von rollorcs »

So ist das eben mit Guano!

:D