habe probleme beim flashen !! Is ne philips box2*!
Habe schon die suchfunktion benutzt, bin aber auf keine lösung für mein problem gekommen, obwohl ich denke, das es dieses prob schon mehrmals gab !! Naja , vielleicht erbarmt sich jemand und schaut sich mal den stream an !!
&debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-1b.03.c5.07.00.00-12
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/philips-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/philips-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208
will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-90-95
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
Input: serial
Output: serial
1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/13.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
Für Hilfe wäre ich sehr dankbar!!
