NeutrinoHD auf der Triple Dragon

Entwicklung
prodigy7
Erleuchteter
Erleuchteter
Beiträge: 595
Registriert: Donnerstag 1. Januar 2004, 16:59

Re: NeutrinoHD auf der Triple Dragon

Beitrag von prodigy7 »

Ich habe mal von dietmarW das Image vom 11.03.2012 (http://tuxbox.in-norddeutschland.de/atm ... ple_Dragon&) genommen, hab aber das Problem, dass der Tuner mit dem Image nicht arbeitet. Kanalsuche schlägt fehl und wenn ich vorhandene Sendereinstellungen einspiele, bekomme ich auch nur ein "Kanal nicht gefunden". Ist da irgendwas kaputt im Neutrino für die TD?
Ein Image, von mir vor Ewigkeiten selbst compiliert, funktioniert anstandslos. Vielleicht erkennt ja jemand was im Output von dmesg?

Mein Image:

Code: Alles auswählen

Linux version 2.6.12 (flow@flownix) (gcc version 3.4.1) #396 Tue Oct 4 23:22:10 CEST 2005

machine: TRIPLEDRAGON STB
bi_s_version (bd_t struct's version)  : 1.7
bi_r_version (bios/bootloader version): 3.29

bi_memsize : 0x04000000 (65)MBytes
bi_memsize1: 0x01000000 (16)MBytes
bi_enetaddr: ba:dd:ad:45:a5:f9
bi_intfreq (CPU speed) : 0x0f053700 (252)Mhz
bi_busfreq (PLB clock) : 0x03c14dc0 (63)MHz
bi_tbfreq (SW timebase): 0x019bfcc0 (27)MHz
bi_opb_busfreq         : 0x03c14dc0 (63)MHz
bi_iic_fast enable     : [0] 0, [1] 0
flash_base             : 0xff800000

MNC Ltd. DBx3000
http://www.mncltd.com
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS1,115200 root=/dev/ide/host0/bus0/target0/lun0/part2 rw mtdparts=phys_mapped_flash:64k(conf),1728k(var),4718592(filesystem),1703936(kernel),128k(ppcboot)ro
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61312k available (2724k kernel code, 724k data, 88k init, 0k highmem)
Calibrating delay loop... 250.88 BogoMIPS (lpj=125440)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Squashfs 2.2 includes LZMA decompression support
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
SGI XFS with no debug enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 31) is a 16550A
io scheduler noop registered
io scheduler deadline registered
loop: loaded (max 8 devices)
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at c5056300 IRQ 28
eth0: Ethernet addr: ba:dd:ad:45:a5:f9
eth0: PHY LAN83C183 (LAN91C111 Internal)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
5 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00010000 : "conf"
0x00010000-0x001c0000 : "var"
0x001c0000-0x00640000 : "filesystem"
0x00640000-0x007e0000 : "kernel"
0x007e0000-0x00800000 : "ppcboot"
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
IBM IIC driver v3.1
ibm-iic0: using standard (100 kHz) mode
ibm-iic1: using standard (100 kHz) mode
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
STB04500 OCP IDE 2.74 - Built Oct  3 2005/12:18:01 for 2.6.12 (none debug)
Probing IDE interface ide0...
hda: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0xc505c1f8-0xc505c1ff,0xc505c1f6 on irq 25
hda: max request size: 1024KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 88k init
eth0: link down
STB04500 TDCORE  2.07 - Built Oct 28 2005/14:57:11 for 2.6.12 (none debug)
tdav: no version for "os_call_irq_task" found: kernel tainted.
STB04500 TDAV    1.48 - Built Nov 16 2005/19:31:49 for 2.6.12 (none debug)
STB04500 TDPANEL 1.20 - Built Oct 28 2005/14:57:25 for 2.6.12 (none debug)
STB04500 TDTUNER 2.14 - Built Oct 28 2005/14:57:40 for 2.6.12 (none debug)
STB04500 TDCA    1.18 - Built Oct 28 2005/14:57:27 for 2.6.12 (none debug)
STB04500 TDCI    1.42 - Built Oct 28 2005/14:57:31 for 2.6.12 (none debug)
STB04500 TDGFX   1.40 - Built Oct 28 2005/14:57:35 for 2.6.12 (none debug)
STB04500 TDOSS   1.28 - Built Oct 28 2005/14:57:20 for 2.6.12 (none debug)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
[td-dvb-fe] loaded
eth0: no IPv6 routers present
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
dietmarW Image:

Code: Alles auswählen

Linux version 2.6.12 (flow@flownix) (gcc version 3.4.1) #396 Tue Oct 4 23:22:10 CEST 2005

machine: TRIPLEDRAGON STB
bi_s_version (bd_t struct's version)  : 1.7
bi_r_version (bios/bootloader version): 3.29

bi_memsize : 0x04000000 (65)MBytes
bi_memsize1: 0x01000000 (16)MBytes
bi_enetaddr: ba:dd:ad:45:a5:f9
bi_intfreq (CPU speed) : 0x0f053700 (252)Mhz
bi_busfreq (PLB clock) : 0x03c14dc0 (63)MHz
bi_tbfreq (SW timebase): 0x019bfcc0 (27)MHz
bi_opb_busfreq         : 0x03c14dc0 (63)MHz
bi_iic_fast enable     : [0] 0, [1] 0
flash_base             : 0xff800000

MNC Ltd. DBx3000
http://www.mncltd.com
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS1,115200 root=/dev/ide/host0/bus0/target0/lun0/part2 rw mtdparts=phys_mapped_flash:64k(conf),1728k(var),4718592(filesystem),1703936(kernel),128k(ppcboot)ro
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61312k available (2724k kernel code, 724k data, 88k init, 0k highmem)
Calibrating delay loop... 250.88 BogoMIPS (lpj=125440)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Squashfs 2.2 includes LZMA decompression support
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
SGI XFS with no debug enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 31) is a 16550A
io scheduler noop registered
io scheduler deadline registered
loop: loaded (max 8 devices)
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at c5056300 IRQ 28
eth0: Ethernet addr: ba:dd:ad:45:a5:f9
eth0: PHY LAN83C183 (LAN91C111 Internal)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
5 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00010000 : "conf"
0x00010000-0x001c0000 : "var"
0x001c0000-0x00640000 : "filesystem"
0x00640000-0x007e0000 : "kernel"
0x007e0000-0x00800000 : "ppcboot"
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
IBM IIC driver v3.1
ibm-iic0: using standard (100 kHz) mode
ibm-iic1: using standard (100 kHz) mode
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
STB04500 OCP IDE 2.74 - Built Oct  3 2005/12:18:01 for 2.6.12 (none debug)
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0xc505c1f8-0xc505c1ff,0xc505c1f6 on irq 25
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 88k init
eth0: link down
STB04500 TDCORE  2.07 - Built Oct 28 2005/14:57:11 for 2.6.12 (none debug)
tdav: no version for "os_call_irq_task" found: kernel tainted.
STB04500 TDAV    1.48 - Built Nov 16 2005/19:31:49 for 2.6.12 (none debug)
STB04500 TDPANEL 1.20 - Built Oct 28 2005/14:57:25 for 2.6.12 (none debug)
STB04500 TDTUNER 2.14 - Built Oct 28 2005/14:57:40 for 2.6.12 (none debug)
STB04500 TDCA    1.18 - Built Oct 28 2005/14:57:27 for 2.6.12 (none debug)
STB04500 TDCI    1.42 - Built Oct 28 2005/14:57:31 for 2.6.12 (none debug)
STB04500 TDGFX   1.40 - Built Oct 28 2005/14:57:35 for 2.6.12 (none debug)
STB04500 TDOSS   1.28 - Built Oct 28 2005/14:57:20 for 2.6.12 (none debug)
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
eth0: no IPv6 routers present
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
Und hier nochmal das dietmarW neutrino Binary mit verbose = 3:

Code: Alles auswählen

[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
        component: audio   0x01
        component: video   0x02
        component: demux   0x04
        component: play    0x08
        component: power   0x10
        component: init    0x20
        component: ca      0x40
        component: record  0x80
        all components:    0xff
[LT:00000000:init  ] init_td_api begin, initialized=0, debug=0x00
DFB input converter thread starting...
DFB input thread: symlink /dev/input/nevis_ir to event0
[LT:00000000:init  ] rc_init rc_addr=0x00
[LT:00000000:init  ] init_td_api end
9216k video mem
FB: 720x576x32 line length 2880. Not using nevis GXA accelerator.
[neutrino] set debuglevel: 3
[neutrino start] 1650  ->     1 ms
[LT:00000000:init  ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init  ] init_td_api end
[neutrino start] 1654  ->    36 ms
***************************** rec dir /media/sda1/movies timeshift dir /media/sda1/movies/.timeshift
[neutrino start] 1659  ->   153 ms
[neutrino start] 1674  ->   560 ms
[neutrino] [FONT] initializing core...
[neutrino] [FONT] Intializing font cache, using max. 4MB...
[neutrino] settings font file /share/fonts/neutrino.ttf
[neutrino] [FONT] adding font /share/fonts/neutrino.ttf... family Arial Narrow, style Regular ok
[neutrino] font family Arial Narrow
[neutrino] [FONT] adding font /share/fonts/neutrino.ttf... family Arial Narrow, style Italic ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] FTC_Face_Requester (Arial Narrow/Regular)
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Italic ok
[neutrino] [FONT] FTC_Face_Requester (Arial Narrow/Italic)
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Bold Regular ok
[neutrino] [FONT] getFont: family Arial Narrow, style Regular ok
[neutrino start] 1677  ->   730 ms
[neutrino start] 1679  ->   730 ms
[neutrino start] 1681  ->   732 ms
[neutrino start] 1683  ->   733 ms
[neutrino start] 1687  ->   817 ms
[lcdd] time-skin not found (/var/tuxbox/config/lcdd/clock/t_a.bmp) -> using default...
[lcdd] weekday-skin not found (/var/tuxbox/config/lcdd/clock/w_a.bmp) -> using default...
[lcdd] date-skin not found (/var/tuxbox/config/lcdd/clock/d_a.bmp) -> using default...
[lcdd] month-skin not found (/var/tuxbox/config/lcdd/clock/m_a.bmp) -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/neutrino.ttf...OK (Arial Narrow/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Arial Narrow/Regular)
[neutrino start] 1692  ->   981 ms
$Id: sectionsd.cpp,v 1.305 2009/07/30 12:41:39 seife Exp $
====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
[neutrino start] 1706  ->   986 ms
[sectionsd] Caching max 30000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 360 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
[LT:33300878:video ] routeVideo set fastblank=1 pin8=-1V, route encoder to TV
[fe0] New frontend on adapter 0
[fe0] open frontend
[fe0] open /dev/dvb/adapter0/frontend0
[fe0] frontend fd 24 type 0
[fe0] voltage 13
[LT:33300878:video ] setAspectRatio(-1, -1)_(-1, -1) v_ar 0
[fe0] tone off
[fe0] FE_SET_TONE took: 0 msec (min 0 max 0)
[fe0] diseqc power on
[fe0] Diseqc cmd: 0xE0 0x10 0x3 
[/frontend.cpp:setDiseqcType:846] DISEQC_1_0
[fe0] diseqc power on
[fe0] Diseqc cmd: 0xE0 0x10 0x3 
[fe0] diseqc reset
[fe0] Diseqc cmd: 0xE0 0x10 0x0 
[fe0] Diseqc cmd: 0xE0 0x10 0x1 
[zapit.cpp] diseqc type = 3
[zapit] Loading services, channel size 192 ..
[getservices] loading motor positions...
[zapit] 1281 services loaded (1281)...
[zapit] service loading took: 1992 msec
/var/tuxbox/config/zapit/myservices.xml: No such file or directory
[/zapit.cpp:PrepareChannels:684] LoadServices: success
[/bouquets.cpp:parseBouquetsXml:334] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[/bouquets.cpp:parseBouquetsXml:378] total: 54 bouquets
[/bouquets.cpp:parseBouquetsXml:334] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[/bouquets.cpp:parseBouquetsXml:378] total: 55 bouquets
[zapit] bouquet loading took: 626 msec
[/zapit.cpp:Start:2026] channels have been loaded succesfully
01:00:58.070 eit_set_update_filter, servicekey = 0x0, current version 0xff got events 0
[zapit] diseqc type = 3
[/frontend.cpp:setDiseqcType:846] DISEQC_1_0
[/frontend.cpp:setDiseqcType:846] DISEQC_1_0
[pmt] stop update filter
CCamManager: channel b24803f300012b5c dont have caPmt
StopPlayBack: standby 0 forced 0
[zapit] zap to Das Erste HD (b24803f300012b5c)
[fe0] setLnbOffsets 9750000/10600000/11700000
[fe0] Diseqc cmd: 0xE0 0x10 0x38 0xFE 
[fe0] SatellitePosition 0 -> 192
[fe0] motorPosition 0 -> 0 usals off
[fe0] tune to frequency 11362000 pol Horizontal/Left srate 22000000
[fe0] voltage 18
[fe0] tuner to frequency 1612000 (offset 9750000)
[fe0] FE_SET_PROPERTY took: 4 msec (min 4 max 4)
[fe0] getEvent: max timeout: 4000
[fe0] poll has event after: 3432 msec (min 2000 max 3432)
[fe0] FE_HAS_SIGNAL
[fe0] ############################## poll timeout, time: 4005 msec (min 2000 max 4005)
[fe0] tuning took: 4006 msec (min 2000 max 4006)
[neutrino start] 1708  ->  9560 ms
[neutrino start] 1711  ->  9561 ms
[neutrino start] 1714  ->  9562 ms
[neutrino start] 1721  ->  9563 ms
[zapit] starting... tid 340
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[LT:33300878:video ] SetVideoSystem(1, 1)
[neutrino VideoSettings] setVideoSettings init video settings...
[LT:33300878:video ] SetVideoMode unknown mode 129
[LT:33300878:video ] setAspectRatio(3, 1)_(3, 1) v_ar 0
[LT:33300878:video ] setAspectRatio set SCART_PIN_8 to 6V
timerd startup, tid 341
[neutrino start] 1726  ->  9582 ms
[neutrino CEC Settings] setCECSettings init CEC settings...
[neutrino start] 1740  ->  9583 ms
[neutrino start] 1751  ->  9583 ms
[neutrino start] 1755  ->  9584 ms
[neutrino start] 1759  ->  9587 ms
[neutrino start] 1762  ->  9588 ms
[neutrino start] 1765  ->  9590 ms
[neutrino start] 1769  ->  9620 ms
[ 01:01:03.187 ] reader_thread stopped
[ 01:01:03.193 ] dvbsub_thread started
[ 01:01:03.195 ] cDvbSubtitleConverter: new converter
[yhttpd] Webserver nhttpd/3.4.0 (yhttpd_core/1.3.2) tid 345
[zapit] sdt monitor started
[neutrino start] 1777  ->  9650 ms
[neutrino] g_info.has_fan: 0
[neutrino start] 1796  ->  9653 ms
CRCInput::open: /dev/input/nevis_ir fd 33
[neutrino start] 1803  ->  9703 ms
[dvbsub @ 0x1068c610] Invalid extradata, subtitle streams may be combined!
Starting STREAM thread keeper, tid 346                                                                                                                                              
listenfd 35
[neutrino start] 1812  ->  9775 ms
[neutrino start] 1823  ->  9790 ms
[neutrino start] 1834  ->  9804 ms
[neutrino] menue setup
[neutrino] init menus...
[neutrino] init mainmenue
[neutrino] mediaplayer menu instance created
[neutrino] init settings menue...
[network config] Instance created
[neutrino] init service menu...
[neutrino] ScanSetup Instance created
$Id: moviebrowser.cpp,v 1.10 2006/09/11 21:11:35 guenther Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for reading.
CMovieBrowser::loadSettings failed
m_cBoxFrame.iHeight 524 m_cBoxFrameBrowserList.iHeight 262 m_settings.browserFrameHeight 50
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino start] 1839  ->  9910 ms
[neutrino] had to wait 0 ms for sectionsd to start up
[neutrino start] 1846  ->  9911 ms
[neutrino] registering as event client
[neutrino start] 1855  ->  9915 ms
[neutrino start] 1911  ->  9957 ms
[neutrino start] 1966  ->  9958 ms
CHDDDestExec: noise 254 sleep 120 /dev/hda
[neutrino start] 1971  -> 10003 ms
[yhttpd] Webserver starting...
[neutrino] Creating channels lists...
[neutrino] got 1095 TV (0 is HD) and 186 RADIO channels
[neutrino] all channels took: 41 msec
[neutrino] sort took: 120 msec
[neutrino] sat took: 122 msec
[neutrino] created Astra 1H/1KR/1L/1M (19.2E) bouquet with 1095 TV and 186 RADIO channels
[neutrino] sat took: 203 msec
[neutrino] sats took: 204 msec
[neutrino] got 43 TV bouquets
[neutrino] tv took: 207 msec
[neutrino] got 26 RADIO bouquets
[neutrino] took: 210 msec
CNeutrinoApp::SetChannelMode 0
[neutrino] 
All bouquets-channels received
[neutrino] total memory allocated by malloc, in bytes: 663552 (648kb), chunks 609392
CLCD::ShowIcon(131072, 1)
StopAutoRecord: autoshift 0
CNeutrinoApp::SetChannelMode 0
**************************** CChannelList::zapTo me 0x355e8e60 Alle Kanäle tuned 268435455 new 0 Das Erste HD -> b24803f300012b5c
StopAutoRecord: autoshift 0
[zapit] saving channel, apid 0 sub pid 0 mode 0 volume 0
[pmt] stop update filter
CCamManager: channel b24803f300012b5c dont have caPmt
StopPlayBack: standby 0 forced 0
[zapit] zap to Das Erste HD (b24803f300012b5c)
[fe0] setLnbOffsets 9750000/10600000/11700000
[fe0] Diseqc cmd: 0xE0 0x10 0x38 0xFE 
01:01:04.015 changeDMX [12]-> 0 (0x4e/0xff) (10 seconds)
[sectionsd] stop eit update filter
01:01:04.019 changeDMX [EIT]-> 0 (0x0/0x0) dummy filter (12 seconds)
CChannelList::adjustToChannelID me 0x355e8e60 [Alle Kanäle] list size 1095 channel_id b24803f300012b5c
CChannelList::adjustToChannelID me 0x355e8e60 [Alle Kanäle] list size 1095 channel_id b24803f300012b5c
[fe0] SatellitePosition 0 -> 192
[fe0] motorPosition 0 -> 0 usals off
[fe0] tune to frequency 11362000 pol Horizontal/Left srate 22000000
[fe0] tuner to frequency 1612000 (offset 9750000)
[fe0] DEMOD: event status 0
[fe0] FE_SET_PROPERTY took: 4 msec (min 4 max 4)
[fe0] getEvent: max timeout: 4000
[fe0] poll has event after: 3432 msec (min 2000 max 4005)
[fe0] FE_HAS_SIGNAL
01:01:08.059 eit_set_update_filter, servicekey = 0x3f300012b5c, current version 0xff got events 0
[fe0] ############################## poll timeout, time: 4005 msec (min 2000 max 4005)
[fe0] tuning took: 4005 msec (min 2000 max 4006)
StartSubtitles: Show
[dvb-sub] ***************************************** start, stopped 1 pid 0
TuxTxt subtitle unpause, running 0 pid 0 page 0
[neutrino start] 1978  -> 14683 ms
AudioMute: current 0 new 0 isEvent: 1
[neutrino start] 1984  -> 14688 ms
[neutrino] initialized everything
[CPlugins] could not find startup.cfg
[neutrino] StopSubtitles
showChannelLogo: logo_available: 1 file: /media/logos/3f300012b5c.png
getImage: resize  /media/logos/3f300012b5c.png to 178 x 28 
after showchannellogo, mode = 3 ret = 3 logo_ok = 1
01:01:08.484 changeDMX [12]-> 0 (0x4e/0xff) (4 seconds)
[sectionsd] stop eit update filter
StartSubtitles: Show
[dvb-sub] ***************************************** start, stopped 1 pid 0
TuxTxt subtitle unpause, running 0 pid 0 page 0
[neutrino] StopSubtitles
showChannelLogo: logo_available: 1 file: /media/logos/3f300012b5c.png
getImage: resize  /media/logos/3f300012b5c.png to 178 x 28 
after showchannellogo, mode = 3 ret = 3 logo_ok = 1
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
zap failed!
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
01:01:12.048 eit_set_update_filter, servicekey = 0x3f300012b5c, current version 0xff got events 0
prodigy7

Receiver:
1x TripleDragon (mit Neutrino-HD aus Tuxbox CVS)
1x Coolstream Neo DVB-S (mit Neutrino-HD vom Hersteller)
1x Coolstream Neo Zee DVB-S (mit Neutrino-HD vom Hersteller)
prodigy7
Erleuchteter
Erleuchteter
Beiträge: 595
Registriert: Donnerstag 1. Januar 2004, 16:59

Re: NeutrinoHD auf der Triple Dragon

Beitrag von prodigy7 »

Update: Mit der Version vom 13.04. genau das gleich -> Kein Empfang.
prodigy7

Receiver:
1x TripleDragon (mit Neutrino-HD aus Tuxbox CVS)
1x Coolstream Neo DVB-S (mit Neutrino-HD vom Hersteller)
1x Coolstream Neo Zee DVB-S (mit Neutrino-HD vom Hersteller)
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: NeutrinoHD auf der Triple Dragon

Beitrag von seife »

hast du mal versucht, auf was anderes as "Das Erste HD" zu zappen?
DiSEqC-Einstellungen korrekt?
prodigy7
Erleuchteter
Erleuchteter
Beiträge: 595
Registriert: Donnerstag 1. Januar 2004, 16:59

Re: NeutrinoHD auf der Triple Dragon

Beitrag von prodigy7 »

Ja - hab diverse Sender durchgezappt. Das Erste HD war nur der Startsender, klar - kann er nicht anzeigen weil HD-Kanal. Ich hab zuerst mit der frischen Installation einen Sendersuchlauf gemacht, der nichts fand. Danach hab ich von der anderen Platte, wo ich mein gebautes (müsste um die 1 bis 1 1/2 Jahre alt sein) drauf hatte, die Sender-Konfiguration rüber kopiert, die dort einwandfrei funktioniert hat.
An sich die Einstellungen würde ich eher ausschließen. Gibts noch irgendeinen Weg, wie ich dir nützliche Informationen zur Verfügung stellen kann?
prodigy7

Receiver:
1x TripleDragon (mit Neutrino-HD aus Tuxbox CVS)
1x Coolstream Neo DVB-S (mit Neutrino-HD vom Hersteller)
1x Coolstream Neo Zee DVB-S (mit Neutrino-HD vom Hersteller)
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: NeutrinoHD auf der Triple Dragon

Beitrag von seife »

Das was du als "funktionierend selbstgebaut" gepostet hast, kann nicht viel älter als ein Vierteljahr sein.

Ich werde es einfach mal selbst ausprobieren. Wie genau installierst du so einen dietmarw-Build?
prodigy7
Erleuchteter
Erleuchteter
Beiträge: 595
Registriert: Donnerstag 1. Januar 2004, 16:59

Re: NeutrinoHD auf der Triple Dragon

Beitrag von prodigy7 »

Kommt mir gefühlt aber schon so lange vor .. im Zweifelsfall kann ich auch nochmal genauer gucken.

Um das Build zu installieren, die Zielplatte passend partitionieren (Partition 1 richte ich für die Aufnahmen ein, Partition 2 für das System). Beides habe ich dann mit ext3 formatiert und auf der Partition 2 habe ich dann das Archiv entpackt. Das wars - bei mir lief es dann so.
Bei den Archiven von dietmarW musst du aufpassen - sind .gz Dateien auch wenn die die Endung .bz2 haben (vielleicht hat er es auch schon aufgrund meines Hinweises gefixt).
prodigy7

Receiver:
1x TripleDragon (mit Neutrino-HD aus Tuxbox CVS)
1x Coolstream Neo DVB-S (mit Neutrino-HD vom Hersteller)
1x Coolstream Neo Zee DVB-S (mit Neutrino-HD vom Hersteller)
prodigy7
Erleuchteter
Erleuchteter
Beiträge: 595
Registriert: Donnerstag 1. Januar 2004, 16:59

Re: NeutrinoHD auf der Triple Dragon

Beitrag von prodigy7 »

Es ist einfach nur strange ... hab die Box jetzt nochmal eingeschaltet und einzelne Sender funktionieren, wenn auch nur mit Artefakten. Kann es vielleicht sein, dass die 3,5" Platte zu viel Saft zieht und den Tuner irgendwie in Mitleidenschaft zieht?
Das andere funktionierende System liegt auf einer 2,5" Platte.
prodigy7

Receiver:
1x TripleDragon (mit Neutrino-HD aus Tuxbox CVS)
1x Coolstream Neo DVB-S (mit Neutrino-HD vom Hersteller)
1x Coolstream Neo Zee DVB-S (mit Neutrino-HD vom Hersteller)
hrby
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Samstag 10. März 2012, 13:45

Re: NeutrinoHD auf der Triple Dragon

Beitrag von hrby »

@prodigy7
du musst mal mit LNB Offset experimentieren (Hauptmenü>Service>Kanalsuche>LNB Konfiguration>z.B. Astra 19,2).
Mein LNB ist mit den Jahren um 4 MHZ nach oben gewandert so das ich LNB Low Offset von 9750 auf 9746 MHZ und LNB High Offset von 10600 auf 10596 ändern musste.

In wieweit den LNB zu hoch oder zu niedrig ist musst du ausprobieren, aber dann rennt die Büchse wider wie ein Hase!
__________________________________

@Seife
ist es möglich der TD aac,m4a beizubringen oder ist sie zu schwach dafür?

MfG
Herbert
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: NeutrinoHD auf der Triple Dragon

Beitrag von seife »

Keine Ahnung wieviel CPU das zum dekodieren braucht.
Probier's aus ;-)
hrby
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Samstag 10. März 2012, 13:45

Re: NeutrinoHD auf der Triple Dragon

Beitrag von hrby »

Also, hab's mit meinem alten Handy versucht und dann mit PC:

FSC T830 Windows Mobile 5, 416 MHZ auf 200 MHZ runter getaktet, Mort Player, CPU Auslastung vom Player 56-62%.

PC AMD Athlon X2 64 3800 MHZ, Totem Player, CPU Auslastung vom Player 2-4%.
:D

Und nu?
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: NeutrinoHD auf der Triple Dragon

Beitrag von seife »

Nun auf der Tripledragon probieren, das ist das einzige was hilft. Das Telefon hat evtl. einen Hardwaredecoder für das Zeug.
hrby
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Samstag 10. März 2012, 13:45

Re: NeutrinoHD auf der Triple Dragon

Beitrag von hrby »

Durch Hand auflegen hat's leider nicht funktioniert!
Wie würdest du das machen?
:lol:

Ich hatte aber schon mal gesucht und dies gefunden:
http://article.gmane.org/gmane.comp.vid ... x.scm/1456
http://article.gmane.org/gmane.comp.vid ... x.scm/1455

Und das einzige was das Handy Hardware mäßig beschleunigt ist abstürzen.