Problem beim Flashen...

Wie blitze ich ein Bild - Permanent Outgoing Incomes
-= Carfield =-
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Donnerstag 1. August 2002, 17:20

Problem beim Flashen...

Beitrag von -= Carfield =- »

Hallo Leute,
so langsam weiß ich irgendwie nicht mehr weiter. Hatte schon allgemeine Startschwierigkeiten, aber das habe ich noch gelöst bekommen.

Ich habe das AlexW Image schon einmal drauf gehabt auf der Box und habe angefangen rumzu experimentieren. Ging auch alles Recht gut, bis ich das Image nach einmal einspielen wollte.
Ab jetzt läuft meine Box nicht mehr und ich bekomme auch kein Image sauber eingespielt.

Ich poste mal den Text aus dem COM Terminal, vielleicht kann damit ja jemand was anfangen..
Was mir aufgefallen ist, da ist öfter mal ein 'T' zu sehen, im Flashmodus...

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-6f.cd.1b.07.00.00-c2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.50, My IP 192.168.0.20
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-22-59
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.50; our IP address is 192.168.0.20
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.50; our IP address is 192.168.0.20
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/dbox2/alexW2xBaseimageV1.6.img
BOOTP broadcast 1
TFTP from server 192.168.0.50; our IP address is 192.168.0.20
Filename '/C/dbox2/alexW2xBaseimageV1.6.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
#########################################################################T #####
################################################################################
################################################################################
###############################################T ###############################
################################################################################
################################################################################
#####################T #########################################################
################################################################################
##########################################################################T ####
################################################################################
################################################################################
#################################################T #############################
################################################################################
################################################################################
####################T ##########################################################
################################################################################
################################################################################
################################################################################
##################################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

...

Kann mir da jemand weiterhelfen?
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Hm, sieht nach einem Problem mit dem Nullmodem aus.
Schau mal ob das evlt. locker ist oder so.

Wenn es gar nicht will, kannst Du auch noch die Methode verwenden: http://www.neutrino-anleitung.de/null_flash.htm
-= Carfield =-
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Donnerstag 1. August 2002, 17:20

Beitrag von -= Carfield =- »

Super Anleitung, danke... funktioniert wunderbar.