***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt (via IpHlpApi #2)
***MAC address: 00:20:18:29:31:9A Local IP: 192.168.0.1
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.2 with MAC 00:50:9C:3A:4A:F9
BootP> Answer sent!
TFTP> Started TFTP-Transfer for \"D:\\BOOTMANAGER\\ppcboot_writeflash\"...
TFTP> Transfer finished, sent 394 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.2 with MAC 00:50:9C:3A:4A:F9
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested \"D\\tftpboot\\logo-lcd\"
TFTP> Started TFTP-Transfer for \"D:\\BOOTMANAGER\\logo-lcd\"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.2 with MAC 00:50:9C:3A:4A:F9
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested \"D\\tftpboot\\logo-fb\"
TFTP> Started TFTP-Transfer for \"D:\\BOOTMANAGER\\logo-fb\"...
TFTP> Transfer finished, sent 85 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.2 with MAC 00:50:9C:3A:4A:F9
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested \"C:\\WINDOWS\\Desktop\\1.img\"
TFTP> Started TFTP-Transfer for \"C:\\WINDOWS\\Desktop\\1.img\"...
TFTP> Transfer finished, sent 16129 blocks
dann steht das im com terminal fenster :
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-66.18.76.07.00.00-d5
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.2
debug: Sending TFTP-request for file D/BOOTMANAGER/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3a-4a-f9
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename \'D/tftpboot/logo-lcd\'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename \'D/tftpboot/logo-fb\'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/WINDOWS/Desktop/1.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename \'/C/WINDOWS/Desktop/1.img\'.
Load address: 0x120000
Loading: #######################################################################
undso weiter(aus platz gründen weggelassen)
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .....
Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
Flashed 1MBFailure after flash
Timeout writing to Flash
dbox2-ppcboot>
kann mir einer sagen warum das so ist und mir einen tip geben wie ich das image doch noch auf die box bekomme???
danke
