Hallo, ich möchte „meine“ Version (Einstellungen und Settings) auf meinem PC sichern. Das hat bisher auch immer problemlos geklappt, nur jetzt bekomme ich solche Meldungen, kann mir jemand helfen?
:-?
1.6 kann nicht ausgelesen werden?
-
welschinger
- Interessierter
- Beiträge: 54
- Registriert: Samstag 19. Januar 2002, 20:14
-
welschinger
- Interessierter
- Beiträge: 54
- Registriert: Samstag 19. Januar 2002, 20:14
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.11 2002/06/07 17:53:45 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.20 2002/06/07 18:06:03 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.26 2002/06/07 18:06:03 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init TDA8044H
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.33 2002/07/19 22:59:21 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
[camd] 1.CMD-Class 0xE0
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] no card is in slot #2
[camd] no card is in slot #1
[sdt.c] read: Connection timed out
[camd] card_country:
[camd] card_number:
[camd] card_version: ffff
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $
[getservices.cpp] going to parse satellite Astra 19.2E
[zapit] reading Bouquets ....................
[zapit] Found 21 bouquets.
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] no card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.307 2002/07/22 21:08:07 wjoost Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
IP : 192.168.0.200
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
setting freq 1197500
sync: 00
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
[CFrontend::getEvent] timeout
[zapit] tune retry 0
setting freq 1197500
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 21
sync: 01
sync: 21
sync: 01
sync: 21
sync: 01
sync: 21
sync: 21
sync: 21
sync: 21
sync: 05
sync: 21
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFrontsync: 20
end::gsync: 20
etEvensync: 20
t] timesync: 20
out
sync: 20
[zapit] tune retry 1
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFronsync: 20
tend::sync: 20
getEvensync: 20
t] timesync: 20
out
sync: 20
[zapit] tune retry 2
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
[CFrontend::getEvent] timeout
[zapit] tune retry 3
setting freq 1197500
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
[CFrontend::getEvent] timeout
[zapit] tune retry 4
setting freq 1197500
sync: 20
sync: 20
sync: 20
sync: 21
sync: 21
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 21
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFrontsync: 20
end::gsync: 20
etEvensync: 20
t] timesync: 20
out
sync: 20
zap failed!
initial zap failed - rezap
sync: 20
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 20
sync: 20
sync: 20
sync: 20
Und so gehts weiter......
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.11 2002/06/07 17:53:45 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.20 2002/06/07 18:06:03 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.26 2002/06/07 18:06:03 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init TDA8044H
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.33 2002/07/19 22:59:21 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
[camd] 1.CMD-Class 0xE0
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] no card is in slot #2
[camd] no card is in slot #1
[sdt.c] read: Connection timed out
[camd] card_country:
[camd] card_number:
[camd] card_version: ffff
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $
[getservices.cpp] going to parse satellite Astra 19.2E
[zapit] reading Bouquets ....................
[zapit] Found 21 bouquets.
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] no card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.307 2002/07/22 21:08:07 wjoost Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
IP : 192.168.0.200
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
setting freq 1197500
sync: 00
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
[CFrontend::getEvent] timeout
[zapit] tune retry 0
setting freq 1197500
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 21
sync: 01
sync: 21
sync: 01
sync: 21
sync: 01
sync: 21
sync: 21
sync: 21
sync: 21
sync: 05
sync: 21
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFrontsync: 20
end::gsync: 20
etEvensync: 20
t] timesync: 20
out
sync: 20
[zapit] tune retry 1
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFronsync: 20
tend::sync: 20
getEvensync: 20
t] timesync: 20
out
sync: 20
[zapit] tune retry 2
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
[CFrontend::getEvent] timeout
[zapit] tune retry 3
setting freq 1197500
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
[CFrontend::getEvent] timeout
[zapit] tune retry 4
setting freq 1197500
sync: 20
sync: 20
sync: 20
sync: 21
sync: 21
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 21
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
sync: 20
[CFrontsync: 20
end::gsync: 20
etEvensync: 20
t] timesync: 20
out
sync: 20
zap failed!
initial zap failed - rezap
sync: 20
setting freq 1197500
sync: 20
sync: 20
tuner locked
setting symbolrate: 27500000
fec: 03
01 00 6f b5 87 22 00 20 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 20
sync: 20
sync: 20
sync: 20
Und so gehts weiter......