Kann nicht mehr Flashen HILFE:::::!

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Carlo
Beiträge: 2
Registriert: Dienstag 20. August 2002, 11:54

Kann nicht mehr Flashen HILFE:::::!

Beitrag von Carlo »

Hallo!

Ich hab seit einem Monat Linux auf meiner Nokia Kabel mit 2xI.
Habe es draufmachen lassen. Gestern hat die Box plötzlich nicht mehr gebootet.
Ich habe dann versucht neu zu Flashen aber der Bootmanager bleibt immer stehen.
Ich habe dann mal Strg und C gedrückt und es ging etwas weiter und im Display stand PPC Boot 1.1.6 aber weiter komme ich nicht.
Wer kann mir helfen??
Hier der Log vom Feldtech Bootmanager:

Bevor ich Strg und C drücke:

[debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-65.e5.42.07.00.00-80
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
find_inode failed for name=tuxbox
load: Failed to find inode
LCD: find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1

und nachdem ich Strg und C gedrückt habe:


[debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-65.e5.42.07.00.00-80
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
find_inode failed for name=tuxbox
load: Failed to find inode
LCD: find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1

Abort
*** ERROR: `serverip' not set
can't find logo
FB: find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash - try network
*** ERROR: `serverip' not set
can't find logo - no init
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/EMUIMAGEALT
=>



Kann mir da jemand weiterhelfen??

Vielen Dank!

Carlo.
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

grrrrrrrrrrrr, manchmal machts keinen Spaß....
schau mal in nem anderen Forum, am besten n australisches, vielleicht verstehst das besser als Deutsch
never change a running system
Carlo
Beiträge: 2
Registriert: Dienstag 20. August 2002, 11:54

Beitrag von Carlo »

Was Wie bitte?
BOFH
Erleuchteter
Erleuchteter
Beiträge: 498
Registriert: Sonntag 10. März 2002, 17:00

Re: Kann nicht mehr Flashen HILFE:::::!

Beitrag von BOFH »

Carlo hat geschrieben:=> bootp 120000 /C/EMUIMAGEALT
Boardregel 1,§1, Absatz1
Keine illegalen Aktivitäten in diesem Board.
Tschau
(Close)