hier ist die ganze Startlog.
Vielleicht kann mir einer Sagen worn es liegt, er schreibt irgendwas von SIGKILL.
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-45.04.a6.07.00.00-66
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 553795 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 553731 Bytes = 540 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19-rc2-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
wird bestraft ;-) #1 Son Jul 28 11:49:33 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30904k available (1036k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:31:19:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.05.26-17:53+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19-rc2-dbox2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dlcd.o: init lc
d driver module
lcd.o: found KS0713/SED153X lcd interface on 3
mesg
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg
_attenuation
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_
attenuation
Init VES1993
/lib/modules/2.4.19-rc2-dbox2/misc/ves1993.o: unresolved symbol register_fronten
d
/lib/modules/2.4.19-rc2-dbox2/misc/ves1993.o: unresolved symbol unregister_front
end
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol unregister_
demux
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_pcr_pid
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue_write_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_all
oc_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol register_de
mux
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_force_discontinuity
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol gtx_set_que
ue_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_get
_info
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_get_queue_write_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_fre
e_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_
info
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_sh
ow
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_ge
t_clut
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_input_size
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_pos
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hi
de
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_i
nfo
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_size
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_input_mode
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_clut
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_blevel
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_ge
t_info
Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[camd] /dev/dvb/card0/ca0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $
[getservices.cpp] /var/tuxbox/config/zapit/services.xml: No such file or directo
ry
[zapit] error parsing services!
/dev/ost/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (03, 3, 2, Sagem)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
zapitclient: connect: No such file or directory
zapitclient: connect: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.307 2002/07/22 21:08:07 wjoost Exp $
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
The system is going down NOW !!
Sending SIGKILL to all processes.httpd] stop requested......
CXA2126 found
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting ramfs
Unmounting jffs2
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
) dann geht das log weiter