Probleme mit Cygwin beim Kompilieren.

Beitrag von **dora** » Sonntag 8. September 2002, 20:07

Ich bekomme jedesmal folgende Fehlermeldung:

/usr/autotool/devel/share/automake-1.6/am/lang-compile.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/lang-compile.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL
/usr/autotool/devel/share/automake-1.6/am/lang-compile.am: AMDEP does not appear in AM_CONDITIONAL
make: *** [/home/xxxx/tuxbox-cvs/apps/configure] Error 1

DANN BEIM ERNEUTEN AUFRUF VON MAKE ALL FOLGENDES:

xxxx@xxxx ~/tuxbox-cvs/cdk
$ make all
cd /home/xxxxx/tuxbox-cvs/apps && \
CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ CFLAGS=
"" CXXFLAGS=""\
./configure \
--host= \
--prefix=/dbox2/cdkroot \
--with-driver=/home/xxxx/tuxbox-cvs/driver \
--with-target=dbox2 \
--enable-maintainer-mode
./configure: line 1219: syntax error near unexpected token `tuxbox,'
./configure: line 1219: `AM_INIT_AUTOMAKE(tuxbox, 0.0.1)'
make: *** [/home/xxxx/tuxbox-cvs/apps/Makefile] Error 2

Kann mir jemand weiterhelfen?

Cygwin Konfiguration:

autoconf (2.53b-1)
autoconf-devel (2.53a-1)
autoconf-stable (2.13-4)
automake (1.5b-1)
automake-devel (1.6.2-1)
automake-stable (1.4p5-5)
bison (1.35-1)
bzip2 (1.0.2-2)
cvs (1.11.0-1)
flex (2.5.4-2)
gcc (2.95.3-5)
gettext (0.11.2-2)
gzip (1.3.3-4)
libtool (20020705-1)
libtool-devel (20020705-2)
libtool-stable (1.4.2-2)
make (3.79.1-7)
ncurses (5.2-8 )
patch (2.5-3)
tar (1.13.19-1)
texinfo (4.2-3)
wget (1.8.2-1)

Zusätzlich ist das Paket "zlib" von der Setup Konfiguration abgewählt worden.

Danke im Voraus
Dora

Beitrag von **dora** » Montag 9. September 2002, 01:05

make core durchgelaufen

----------------
make boot error:
----------------

$ make boot
/usr/bin/install -c -d /dbox2/cdkroot/bin
/usr/bin/install -c -d /dbox2/cdkroot/lib/modules/2.4.19/misc
make -C /home/xxxxx/tuxbox-cvs/driver \
KERNEL_LOCATION=/home/xxxxx/tuxbox-cvs/cdk/linux \
CROSS_COMPILE=powerpc-tuxbox-linux-gnu- CC=`if [ -f /dbox2/cdk/bin/power
pc-tuxbox-linux-gnu-gcc-2.95 ]; then echo powerpc-tuxbox-linux-gnu-gcc-2.95; els
e echo powerpc-tuxbox-linux-gnu-gcc; fi` \
INSTALL_MOD_PATH=/dbox2/cdkroot
make[1]: Entering directory `/home/xxxxx/tuxbox-cvs/driver'
make -C avia
make[2]: /scripts/pathdown.sh: Command not found
make[2]: Entering directory `/home/xxxxx/tuxbox-cvs/driver/avia'
DIR=`pwd`; (cd /home/xxxxx/tuxbox-cvs/cdk/linux; make SUBDIRS=$DIR modules)
make[3]: Entering directory `/home/xxxxx/tuxbox-cvs/cdk/linux-2.4.19'
make -C /home/xxxxx/tuxbox-cvs/driver/avia CFLAGS="-D__KERNEL__ -I/home/contr
ol/tuxbox-cvs/cdk/linux-2.4.19/include -Wall -Wstrict-prototypes -Wno-trigraphs
-O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -D__powerpc__ -fsigned
-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu
=823 -DMODULE" MAKING_MODULES=1 modules
make[4]: Entering directory `/home/xxxxx/tuxbox-cvs/driver/avia'
powerpc-tuxbox-linux-gnu-ld -m elf32ppclinux -r -o avia_gt.o avia_gt_core.o avia
_gt_enx.o avia_gt_gtx.o avia_gt_dmx.o avia_gt_gv.o avia_gt_pcm.o avia_gt_capture
.o avia_gt_pig.o avia_gt_ir.o
powerpc-tuxbox-linux-gnu-gcc -D__KERNEL__ -I/home/xxxxx/tuxbox-cvs/cdk/linux-2
.4.19/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
-fno-common -fomit-frame-pointer -D__powerpc__ -fsigned-char -msoft-float -pipe
-ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu=823 -DMODULE -I../includ
e -DEXPORT_SYMTAB -Werror -nostdinc -I /dbox2/cdk/lib/gcc-lib/powerpc-tuxbox-lin
ux-gnu/3.2/include -DKBUILD_BASENAME=avia_gt_napi -c -o avia_gt_napi.o avia_gt_
napi.c
cc1: warnings being treated as errors
avia_gt_napi.c: In function `GtxDmxFeedAlloc':
avia_gt_napi.c:1130: warning: passing arg 1 of `avia_gt_dmx_alloc_queue_video' f
rom incompatible pointer type
avia_gt_napi.c:1136: warning: passing arg 1 of `avia_gt_dmx_alloc_queue_audio' f
rom incompatible pointer type
avia_gt_napi.c:1142: warning: passing arg 1 of `avia_gt_dmx_alloc_queue_teletext
' from incompatible pointer type
avia_gt_napi.c:1155: warning: passing arg 1 of `avia_gt_dmx_alloc_queue_user' fr
om incompatible pointer type
avia_gt_napi.c: In function `GtxDmxInit':
avia_gt_napi.c:1799: warning: passing arg 1 of `avia_gt_dmx_alloc_queue_message'
from incompatible pointer type
make[4]: *** [avia_gt_napi.o] Error 1
make[4]: Leaving directory `/home/xxxxx/tuxbox-cvs/driver/avia'
make[3]: *** [_mod_/home/xxxxx/tuxbox-cvs/driver/avia] Error 2
make[3]: Leaving directory `/home/xxxxx/tuxbox-cvs/cdk/linux-2.4.19'
make[2]: *** [here] Error 2
make[2]: Leaving directory `/home/xxxxx/tuxbox-cvs/driver/avia'
make[1]: *** [_subdir_avia] Error 2
make[1]: Leaving directory `/home/xxxxx/tuxbox-cvs/driver'
make: *** [.driver] Error 2

----------------------------------
make .neutrino bleibt hier stehen:
----------------------------------

/home/xxxxx/tuxbox-cvs/cdk/thttpd-2.23beta1/extras
make[2]: Entering directory `/home/xxxxx/tuxbox-cvs/cdk/thttpd-2.23beta1/extra
s'
rm -f /dbox2/cdkroot/sbin/makeweb /dbox2/cdkroot/sbin/htpasswd /dbox2/cdkroot/sb
in/syslogtocern
cp makeweb /dbox2/cdkroot/sbin/makeweb
cp htpasswd /dbox2/cdkroot/sbin/htpasswd
cp syslogtocern /dbox2/cdkroot/sbin/syslogtocern
rm -f /dbox2/cdkroot/man/man1/makeweb.1
cp makeweb.1 /dbox2/cdkroot/man/man1/makeweb.1
rm -f /dbox2/cdkroot/man/man1/htpasswd.1
cp htpasswd.1 /dbox2/cdkroot/man/man1/htpasswd.1
rm -f /dbox2/cdkroot/man/man8/syslogtocern.8
cp syslogtocern.8 /dbox2/cdkroot/man/man8/syslogtocern.8
make[2]: Leaving directory `/home/xxxxx/tuxbox-cvs/cdk/thttpd-2.23beta1/extras
'
make[1]: Leaving directory `/home/xxxxx/tuxbox-cvs/cdk/thttpd-2.23beta1'
rm -rf thttpd-2.23beta1
touch .thttpd
cd /home/xxxxx/tuxbox-cvs/apps && \
CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ CFLAGS=
"" CXXFLAGS=""\
./configure \
--host= \
--prefix=/dbox2/cdkroot \
--with-driver=/home/xxxxx/tuxbox-cvs/driver \
--with-target=dbox2 \
--enable-maintainer-mode
./configure: line 1219: syntax error near unexpected token `tuxbox,'
./configure: line 1219: `AM_INIT_AUTOMAKE(tuxbox, 0.0.1)'
make: *** [/home/xxxxx/tuxbox-cvs/apps/Makefile] Error 2

-------------------------------
make .lcars bleibt hier stehen:
-------------------------------

$ make .lcars
cd /home/xxxxx/tuxbox-cvs/apps && \
CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ CFLAGS=
"" CXXFLAGS=""\
./configure \
--host= \
--prefix=/dbox2/cdkroot \
--with-driver=/home/xxxxx/tuxbox-cvs/driver \
--with-target=dbox2 \
--enable-maintainer-mode
./configure: line 1219: syntax error near unexpected token `tuxbox,'
./configure: line 1219: `AM_INIT_AUTOMAKE(tuxbox, 0.0.1)'
make: *** [/home/xxxxx/tuxbox-cvs/apps/Makefile] Error 2

is das normal?

danke

@dora
hab ganz genau das gleiche problem!!!
komm aber auch nicht weiter...hat hier niemand eine lösung??
danke!

mfg