habe heute bei meiner DBox2/Avia500/GTX/BL1.0/Kabel versucht eine yadd zu booten. allerdings ohne erfolg... böse
ich habe das jetzt schon mit verschiedenen yadd's probiert..eigene, das von AlexW, die aktuelle von Homar...überall das selbe problem.
am ende kommt:
hatte das bis jetzt bei noch keiner anderen box von mir...Kernel panic: No init found. Try passing init= option to kernel.
<0>Rebooting in 180 seconds..
kann mir vielleicht jemand weiterhelfen?
hier mal das komplette log vom terminal:
danke und gruß SpeedyBZdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xx-xx.xx.xx.xx.xx.xx-xx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP xxx.xxx.x.x, My IP xxx.xxx.x.x
debug: Sending TFTP-request for file F/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)
Initializing...
CPU: PPC823ZTnnA at 68 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: xx-xx-xx-xx-xx-xx
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server xxx.xxx.x.x; our IP address is xxx.xxx.x.x
Filename 'F/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server xxx.xxx.x.x; our IP address is xxx.xxx.x.x
Filename 'F/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server xxx.xxx.x.x; our IP address is xxx.xxx.x.x
Filename 'F/yadd/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
########################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 565357 Bytes = 552 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19-rc2-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
wird bestraft ;-) #1 Son Jul 28 12:10:12 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=xxx.xxx.x.x
:F/yadd/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 68 busfreq = 68
WARNING: NEW intfreq = 68000000 busfreq = 68000000
Decrementer Frequency = 255000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 67.58 BogoMIPS
Memory: 30896k available (1072k kernel code, 332k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:18:d8:00
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 3 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 204cool
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from xxx.xxx.x.x, my address is xxx.xxx.x.x
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=xxx.xxx.x.x, mask=255.255.255.0, gw=255.255.255.255,
host=xxx.xxx.x.x, domain=, nis-domain=(none),
bootserver=xxx.xxx.x.x, rootserver=xxx.xxx.x.x, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on xxx.xxx.x.x
Looking up port of RPC 100005/1 on xxx.xxx.x.x
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
Kernel panic: No init found. Try passing init= option to kernel.
<0>Rebooting in 180 seconds..
