das sind die meldungen der box
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3e.5d.1c.07.00.00-ea
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.4, My IP 192.168.5.26
debug: Sending TFTP-request for file c/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 221120
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Oct 19 2001 - 01:56:12)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-40-06-2e
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.5.4; our IP address is 192.168.5.26
Filename 'c/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FE0E78 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.5.4; our IP address is 192.168.5.26
Filename 'c/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FE0E78 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: tiab
3: flash
4: test2
Select image (1-4), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.5.4; our IP address is 192.168.5.26
Filename 'c/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 587110 Bytes = 573 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@rootfire) (gcc version 3.0.1 20010702 (prerelease)) #1
Son Sep 2 18:05:08 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.5.4:c/dbox2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.5.4:c/dbox2/
cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30652k available (1060k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20282kB/6760kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:40:06:2e
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.5.4, my address is 192.168.5.26
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.5.4
Looking up port of RPC 100005/2 on 192.168.5.4
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.07.23-21:34+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Starting inetd
Setting hostname
sh: /bin/hostname: No such file or directory
Lade module
Lade i2c-core
i2c-core.o: i2c core module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Lade soundcore
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
avia_core.c: do_firmread: Unable to load '/ucodes/avia500.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
Lade ves1893
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_demod
Lade gtx_dmx
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol register_demux
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Setting up loopback device
Using /lib/modules/2.4.2/misc/lcd.o
lcd.o: LCD driver (KS0713) module
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
Starte /etc/init.d/start_neutrino_zapit...
Please press Enter to activate this console. Lade sectionsd
$Id: sectionsd.cpp,v 1.71 2001/10/22 14:27:24 field Exp $
caching 120 hours
events are old 60min after their end time
Lade zapit
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
killall: camd: no process killed
sh: tcsetpgrp: Inappropriate ioctl for device
Zapit $Id: zapit.cpp,v 1.21 2001/10/18 23:04:48 field Exp $
fopen: /var/zapit/last_chan: No such file or directory
open ca0: No such file or directory
Scanning a satellite section
Going to parse Satellite Astra 19.2E
Channels have been loaded succesfully
We have got 374 tv- and 113 radio-channels
_writecam: open ca0: Bad file descriptor
Lade lcd
insmod: a module named lcd already exists
Lade lcdd
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Lade controld
Controld 0.1
[controld] error while loading settings: /var/controld.conf
[controld] useing defaults
[controld] set volume: 0
Starte Neutrino
NeutrinoNG $Id: neutrino.cpp,v 1.69 2001/10/22 15:00:18 McClean Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth <IMG SRC="/forum/images/smiles/icon_cool.gif"> not supported
Using zapit
error while loading settings: /var/neutrino.conf
using defaults...
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial Black/Regular)
DBG: clear: Eat key: -1
That was returned: 00a
fopen: /var/zapit/last_chan: No such file or directory
Changed to TV-mode
That was returned: 00c
All channels received
[zapit] zapping by number
Cannot open video device "/dev/ost/qpskfe0"
CRemoteControl::RemoteControlThread - Nothing could be received from serverd zap
it
: Success
Unknown return-code ><, 0
query epg for onid_tsid >85002e< (SAT.1)
dan bleint mein bild aber leider grün ;-(((
