Lautstärkenreglung mit der neuen SW

[uklein]

Ich habe die aktuelle SW auf meiner Sagem-Box. Leider funtioniert die Lautstärkenreglung und die Stummschaltung nicht mehr. Mit der alten SW (V0.6 oder so) hat es funktioniert.

Was habe ich falsch gemacht?

Gruß
Udo

[DieMade]

Was ist aktuelle Soft 0.6?

Poste mal ein Bootlog bitte.

[uklein]

Die Frage ist bestimmt schon oft gestellt worden: Wie mache ich ein Bootlog?
Geht das über die serielle SS, wenn ja wie?

Danke Udo

[DieMade]

- Nullmodemkabel anschließen
- Bootmanager starten
- Nur COM auf 9600 Baud aktivieren
- Auf "Start" klicken
- Box einschalten

- Im Terminalfenster mit rechter Maustaste in die Zwischenablage kopieren - feddich

[uklein]

Danke für die Anleitung. Hier ist das Bootlog:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c4.1d.ba.07.00.00-1e
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202484
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:01:35)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 577057 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 576993 Bytes = 563 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Son Sep 22 10:35:10 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30944k available (1008k kernel code, 356k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:32:23:03
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.19/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.19/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.19/misc/event.o
event: init ...
Using /lib/modules/2.4.19/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Using /lib/modules/2.4.19/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.19/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.19/misc/dvb_demux.o
Using /lib/modules/2.4.19/misc/dvbdev.o
Using /lib/modules/2.4.19/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Using /lib/modules/2.4.19/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.19/misc/dmxdev.o
write 1 event's ...2.4.19/misc/dvb_frontend.o
write 1 event's ...
via_gt.o
Using /lib/modules/2.4.19/misc/aav
a$iacot_: red:$Ivi agta_or_cc,e.1.v 2222/00/109223 3::5 J55t olp Ex
a_vi_cgte:orut aetodtiec cngp hipety. ..iAAVNX eou f
a$iaavt__gx:enId $av: _giaent_c,x.1.v 2132/00/009192 5::2 J37t olp Ex
a_vi_agtelcc$I: ad:a_vi_agtelcc,v.c.6 100 2092/9 /1:021209:ol JExt $
agta_mx_d$I: ad:a_vi_dgt.cmx 1,v34.100 2092/1 /2:000080:ol JExt $ p vi
E7ta_mx_dSu: escculsf llydeoaucd e od1.VB p vi
-INXTeNI->d
0erthMIe T GH nbeTSo (
agta_mx_dwa: inrn mg,alisneigqud e eu(i0 0xs A032 s0,e iz5365, 6)igalngni.
agta_v:_gId $av: _giagvt_,v.c.2 1202 /002228/3: 1:339Jo3 Elt $xpav ..vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
_giapct_ $m:: Idiaavt__gm.pcv c,181.00 2092/5 /2:518520:ol JExt $
agta_ap_cretu$I: ad:a_vi_cgttuap.cre 1,v2 .202208//0 122393:3 :3ltJoxp E
a$iaavt__gg:piId $av: _giapit_c,g.1.v 2282/00/208132 9::3 J33t olp Ex
a_vi_igt $r:: Idiaavt__g.cir 1,v9 .102208//0 122393:3 :3ltJoxp E
$iaavt__grecoLo: edadVi AeNA GTX/drX erivUsing /lib/modules/2.4.19/misc/dv

Using /lib/modules/2.4.19/misc/ve

i.2ce.or do:veriVEr 99S1DV3 DEB DECOreR stgieder
i.-c2ce.or co:enli[Vt 19ES] 93gireerst tedado teap[]r os(p4).
i.-c2ce.or do:verispr 5956sa/t5950un t derverirer stgieder
-c2ce.or co:enli[Dt x2Boun T Derveri rr]isegretetod da aerpt]( [s.po). 5VE
Using /lib/modules/2.4.19/misc/ad

a_vi_ngti:apId $av: _gianat_.cpi 1,v30.100 2092/8 /1:515247:ol JExt $
agta_ap_n hi:dware arctsen ioltfiinerdig blsa. p vi
Using /lib/modules/2.4.19/misc/aav edvia_gt_vbi.o
_giavbt_ $i:: Idiaavt__gi.vbv c,161.00 2082/2 /2:313339:ol JExt $
Using /lib/modules/2.4.19/misc/aXeNA GTX/ p vi

a_vi_fgt $b:: Idiaavt__g_cfbe.orv c,361.00 2082/2 /2:313339:ol JExt $
agta_v:_get snp_i_mute odod(m2)e=av p vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
a)iagvt_se: int_t_pudemomo (=2de
a)a_vi_ggt sv:_ietutnpiz_s(we thid20=7he, htig76=5
a_vi_ggt sv:_ietutnpod_m(me e=od
2)iaavt__g: gvt_sepuinsit_ (zedtwi72h= h0,ghei57t=
6)nsCoe:olwi shitc tngcoo urlora f bmefeufder cevi2x 8
Using /lib/modules/2.4.19/misc/ae ebamfeuffrr e amffbu dericev

Using /lib/modules/2.4.19/misc/l$2112/00/209185 0::5 J52t olp Ex

.ocdin: lit dcdverimor ledulc lcd.o
o:d.ou f Knd71S0SE3/53D1lcX ind rftee ac 3oncdkVcInfo $Id: cdkVcInfo.c,v 1.0

,v 1.54 2002/08/31 22:30:27 obi E
Network LCD-Driver $Id: lcdd.cpp
ing default...
[lcdd] time-skin not found -> us[lcdd] weekday-skin not found ->

[lcdd] date-skin not found -> ususing default...
[lcdd] month-skin not found -> uing default...
[FONT] initializing core...ult...
micron.ttf...
[FONT] adding font /share/fonts/
[FONT] Intializing font cache...OK
[FONT] FTC_Face_Requester (Micron

[sectionsdclient] connect: No su/Regular)
$Id: sectionsd.cpp,v 1.135 2002/ch file or directory
events are old 60min after their hegoodguy Exp $

[camd] ca system id: 1702d time


[camd] no card is in slot #2
$Id: zapit.cpp,v 1.253 2002/10/0[camd] a card is in
slot #1
satellite Astra 19.2EExp $
[getservices.cpp] going to parse[camd] no card is in slot
#2


[camd] a card is in slot #1
[zapit] reading Bouquets .......[zapit] LoadServices:
success
[zapit] channels have been loaded...............

Controld $Id: controld.cpp,v 1. succesfully
64 2002/10/05 20:46:20 dirch Exp $[controld] Boxtype detected: (03,

eetntve00: 0000
[nhttpd] Neutrino HTTP-Server sta

[camd] no card is in slot #2
[camd] no card is in slot #2[camd] a card is in slot
[camd] a card is in slot #1
ino.cpp,v 1.335 2002/10/05 20:46:
[neutrino] NeutrinoNG $Id: neutr
createdh Exp $
[neutrino] frameBuffer Instance [neutrino] vcrControl Instance cr

av24k video memeated
a)iagvt_se: int_t_pudemomo (=2de
[neutrino] enable flash)_s(we thid20=7he, htig76=5
[neutrino] Software update enable

Netmask : 255.255.255.0


Broadcast: 193.168.0.255
CVCRControl registered new serveGateway :
[CHTTPUpdater] HTTP-Basepath: httngrab

p://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] timerd event register[neutrino] za
[CFrontend::setFrontend] freq 115

[CPlugins] Dir: /lib/tuxbox/plug8500
[CPlugins] 11 plugins found...ins/
onFrndtege::vetE] nt_FFELUAI_ERE
initial zap failed - rezap zap failed!V
58500
[CFrontend::setFrontend] freq 11[C
onFrndtege::vetE] nt_FFELUAI_ERE
zap failed!V


Hoffendlich kann man hier was sehen.

Gruß
Udo

[DieMade]

Hmm, das einzige was ich erkennen kann ist, daß die serielle Verbindung irgendwann "verhummelt" wird. Ist aber kein Problem.

Haste evtl. nen Verstärker am optischen Ausgang angeschlossen? Der ist nicht über die Box regelbar.

[rasc]

bestimmt mit dem Hyperterminal gemacht - das Programm ist schlichtweg schrott.

[uklein]

Nein, ich habe nur den SCART-Anschluss dran.

[Tom1069]

Du hast aber schon den TV-Scart und nicht den VCR genommen ,oder ?

[uklein]

Oder!!!

Dem Dummen muss es gesagt werden. darauf habe ich garnicht geachtet.

Danke für den Tipp, passe beim nächsten mal besser auf.

Gruß
Udo