> help
ChorusOS r3 rsh daemon - valid commands are:
mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
Ich denke, bis dahin ist alles o.k.
Als ich dann den Schreibschutz aufgehoben habe und "enable with minflsh" angeklickt habe kam folgendes:
> echo Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
> umount /
> mount 192.168.0.9:C/minflsh/ /
C_INIT: mount 192.168.0.9:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 45 sec, 60000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 48 sec, 400000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 49 sec, 900000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 51 sec, 900000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 53 sec, 400000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 54 sec, 900000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 56 sec, 900000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 58 sec, 400000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 59 sec, 900000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 61 sec, 900000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 63 sec, 400000000 nsec
INIT: afexec of siegep failed - No such file or directory
Nach der Ausführung “enable with minflsh steht dort im COM-Terminal folgendes:
DebugEnabler ( c ) tmbinc, gillem+ / (sagem/13, amd, philips) 1.8beta
Bl.version : 1.1
Product? at: 10000904
current state : locked
flashrom type: 2x16 bit? Unknown, please report AFTER you read the howto.
Please reset now!
Kann mir bitte jemand helfen und sagen, warum die Box nicht im Debug Mode gelangt?
Auf dem Display steht nun „KEIN SYSTEM“. Ist die Box defekt? Das Problem hatte ich bisher noch nicht.
