So ich bin am verzweifeln die Sagem 2*A im 2*I Layout will einfach nicht in den Debug !!!!!!! Folgender Log kommt :
> echo Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
/lost+found: not currently mounted
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> umount /
> mount 192.168.0.20:C/minflsh/ /
C_INIT: mount 192.168.0.20:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 10
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 67 sec, 100000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 70 sec, 490000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 71 sec, 990000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 73 sec, 990000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 75 sec, 500000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 77 sec, 20000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 79 sec, 20000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 80 sec, 520000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 82 sec, 20000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 84 sec, 20000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 85 sec, 520000000 nsec
INIT: afexec of siegep failed - No such file or directory
und im COM-Terminal steht dann folgendes:
DebugEnabler (c) tmbinc, gillem +(sagem/13,amd,philips) 1.8beta
bl-version : 1.1
product? at : 10000904
current state : locked
flashrom type : 2x16 bit? yes. vendor: AMD
engaging gillem-code...
COULDN'T WRITE, IT'S STLL FFFFFFFF
Sorry about that.
Please reset now!
Was hat das denn zu bedeuten, verstehe ich im Moment nicht mehr ??
Mfg
