Box startet nicht mehr

Anlaufschwierigkeiten? Was ist was? Worum geht's?
rst
Interessierter
Interessierter
Beiträge: 76
Registriert: Sonntag 3. November 2002, 09:48

Box startet nicht mehr

Beitrag von rst »

Nachdem ich nun wie beschrieben die neutrino_start für VCR Steuerung modifiziert habe, startet die BOx nun gar nicht mehr. Sie fährt zwar hoch bis:

debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202484
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:01:35)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

dann hängt sie sich auf und ich kriege auch keinen ZUgang mehr, Display wird schwarz.

Habe nun versucht mit Bootmanager neu zu flashen und komme da bis:


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-68.c1.d0.07.00.00-cb
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.123.100, My IP 192.168.123.10
debug: Sending TFTP-request for file C/DBOX2/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3b-a6-f2
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.123.100; our IP address is 192.168.123.10
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done
lo: 0x100000unprotecting 1
[0]-> [0] [Sb000b0] unprotecting 2
[0]-> [0] [Sb000b0] unprotecting 3
[0]-> [0] [Sb000b0] unprotecting 4
[0]-> [0] [Sb000b0] unprotecting 5
[0]-> [0] [Sb000b0] unprotecting 6
[0]-> [0] [Sb000b0] unprotecting 7
[0]-> [0] [Sb000b0] unprotecting 8
[0]-> [0] [Sb000b0] unprotecting 9
[0]-> [0] [Sb000b0] unprotecting a
[0]-> [0] [Sb000b0] unprotecting b
[0]-> [0] [Sb000b0] unprotecting c
[0]-> [0] [Sb000b0] unprotecting d
[0]-> [0] [Sb000b0] unprotecting e
[0]-> [0] [Sb000b0] unprotecting f
[0]-> [0] [Sb000b0] unprotecting 10
[0]-> [0] [Sb000b0] unprotecting 11
[0]-> [0] [Sb000b0] unprotecting 12
[0]-> [0] [Sb000b0] unprotecting 13
[0]-> [0] [Sb000b0] unprotecting 14
[0]-> [0] [Sb000b0] unprotecting 15
[0]-> [0] [Sb000b0] unprotecting 16
[0]-> [0] [Sb000b0] unprotecting 17
[0]-> [0] [Sb000b0] unprotecting 18
[0]-> [0] [Sb000b0] unprotecting 19
[0]-> [0] [Sb000b0] unprotecting 1a
[0]-> [0] [Sb000b0] unprotecting 1b
[0]-> [0] [Sb000b0] unprotecting 1c
[0]-> [0] [Sb000b0] unprotecting 1d
[0]-> [0] [Sb000b0] unprotecting 1e
[0]-> [0] [Sb000b0] unprotecting 1f
[0]-> [0] [Sb000b0] unprotecting 20
[0]-> [0] [Sb000b0] unprotecting 21
[0]-> [0] [Sb000b0] unprotecting 22
[0]-> [0] [Sb000b0] unprotecting 23
[0]-> [0] [Sb000b0] unprotecting 24
[0]-> [0] [Sb000b0] unprotecting 25
[0]-> [0] [Sb000b0] unprotecting 26
[0]-> [0] [Sb000b0] unprotecting 27
[0]-> [0] [Sb000b0] unprotecting 28
[0]-> [0] [Sb000b0] unprotecting 29
[0]-> [0] [Sb000b0] unprotecting 2a
[0]-> [0] [Sb000b0] unprotecting 2b
[0]-> [0] [Sb000b0] unprotecting 2c
[0]-> [0] [Sb000b0] unprotecting 2d
[0]-> [0] [Sb000b0] unprotecting 2e
[0]-> [0] [Sb000b0] unprotecting 2f
[0]-> [0] [Sb000b0] unprotecting 30
[0]-> [0] [Sb000b0] unprotecting 31
[0]-> [0] [Sb000b0] unprotecting 32
[0]-> [0] [Sb000b0] unprotecting 33
[0]-> [0] [Sb000b0] unprotecting 34
[0]-> [0] [Sb000b0] unprotecting 35
[0]-> [0] [Sb000b0] unprotecting 36
[0]-> [0] [Sb000b0] unprotecting 37
[0]-> [0] [Sb000b0] unprotecting 38
[0]-> [0] [Sb000b0] unprotecting 39
[0]-> [0] [Sb000b0] unprotecting 3a
[0]-> [0] [Sb000b0] unprotecting 3b
[0]-> [0] [Sb000b0] unprotecting 3c
[0]-> [0] [Sb000b0] unprotecting 3d
[0]-> [0] [Sb000b0] unprotecting 3e
[0]-> [0] [Sb000b0] unprotecting 3f
[0]-> [0] [Sb000b0] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors
Copy to Flash...

dann ist wieder Schluß.
was kann ich noch machen bin leicht ratlos


Danke für jeden Tip


Ralf
rst
Interessierter
Interessierter
Beiträge: 76
Registriert: Sonntag 3. November 2002, 09:48

Beitrag von rst »

Problem erledigt, hatte nicht lange genug gewartet, nach 20 min. war der Flash komplett.

Gruß Ralf