Unknown Ucode

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Jake_Plisken
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 28. Januar 2003, 11:12

Unknown Ucode

Beitrag von Jake_Plisken »

:cry: Meine Sagem 1Fl ist extrem incooperativ.
Sie will mir meine Premiere Programme nicht zeigen.

Habe das Problem mit den unknown ucodes.
Dummerweise habe ich die nicht. Habe die Kiste nicht selber umgestanzt.

Habe es schon mit boot net versucht. kein erfolg :-(

Hier mal ein Log.
Mit und ohne Karte funktioniert nichts im Premiere bereich.


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-14.e6.05.08.00.00-58
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.10.22, My IP 192.168.10.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-33-6d-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: T T T T T T T T T
Retry count exceeded; starting again
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-14.e6.05.08.00.00-58
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.10.22, My IP 192.168.10.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-33-6d-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: T T debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-14.e6.05.08.00.00-58
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.10.22, My IP 192.168.10.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-33-6d-d9
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.10.22; our IP address is 192.168.10.23
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: T T T T T T T T T
Retry count exceeded; starting again
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Habe das Problem mit den unknown ucodes.
Ich nehme mal an Du hast das Orginalimage mitgekriegt.
Da sind die richtigen Ucodes drin (spätestens nach einem Update):
http://www.dietmar-h.net/ucodes.html
Jake_Plisken
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 28. Januar 2003, 11:12

Aw Aw

Beitrag von Jake_Plisken »

Sorry kannst du etwas langsamer schreiben :-)?
Habe die Box erst ne Woche.

Was kann ich den machen wenn ich die Datein
nicht auf Platte oder Box.



Die DMX.so & Co ist nirgendwo zu finden.

HILFFFEEEE!!
Die Zukunft ist die Zeit, in der mann bedauert, etwas nicht getan zu haben.

Sagem 1*I Sat
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Hast Du Dein Orginalimage noch?
Wenn nein -> Umbauer nerven.