Sagem 1xI Debug Prob

[macross]

Hallo.

ich habe eine Problem mit einer Sagem 1xI Kabel Box.
Ich komme sowit das ich das ich das Help kommando senden kann und das funktioniert auch.Anschließend starte ich das enable_debug_miniflsh Script, allerdings bekomme ich dann am Ende im Com Fenster keine Nachricht, das ich im Debugmode bin.

Amnbei poste ich mal die Meldungen:

> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
> umount /
> mount 192.168.0.100:C/Burner/Dbox/minflsh/ /
C_INIT: mount 192.168.0.100:C/Burner/Dbox/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/sagem-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 16 sec, 380000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 20 sec, 330000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 23 sec, 430000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 25 sec, 830000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 28 sec, 630000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 31 sec, 30000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 33 sec, 830000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 36 sec, 230000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 39 sec, 40000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 41 sec, 450000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 45 sec, 150000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Command timed out - didn't get answer from DBox!
! Execution stopped!

[Dietmar]

Was kommt im com-terminal?
flash.so hast getauscht?
An den Schreibschutz hast auch gedacht?

netzwerkseitig sieht alles gut aus, mal die einstellungen für die serielle Schnittstelle (Gerätemanager) überprüfen, evtl. auch mal die Schnittstelle wechseln.