Hallo!
Seit ein paar Tagen haben ich Linux auf meiner Philips DBox2. Bis auf gelegentliche Abstürze klappt auch alles gut.
Gestern habe ich meine Premiere Karte bekommen. Reinstecken, Anschalten, lief auf Anhieb. Ich habe ein wenig in den Premiere Kanälen gezappt, bis ich auf einen Premiere Sportkanal kam, der nicht in meinem Abo enthalten ist. Die Box ist prompt abgestürzt.
Seit dem Reboot bleiben alle Premiere Kanäle schwarz; auch ein erneutes Flashen bringt keine Veränderung.
Woran kann das denn liegen? Mache ich etwas falsch?
Gruss,
Christof
Kein Premiere Empfang mehr
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
-
SoLaLa
- Tuxboxer
- Beiträge: 6119
- Registriert: Mittwoch 3. April 2002, 00:32
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
Hallo !
Auch ich stehe vor demselben Problem. Dachte erst, es würde an meiner Antennenanlage liegen, aber bekomme außer Premiere alle Sender sauber rein. MeineUCodes sind identisch, allerdings habe ich bei den UCodes bei der Cam-Alpha stehen : cam_01_02_105D.
@beagle : Was für ein Image hast Du verwendet ? Ich habe zum testen das AlexW2x1.6.8 mit den cdkramfs vom 18.02. .
Hoffentlich kann uns jemand helfen, meine bessere Hälfte will die lfd. Abo-Kosten während der Nichtnutzung von meinem Taschengeld abziehen... ;-)
Gruss EMoschi
Auch ich stehe vor demselben Problem. Dachte erst, es würde an meiner Antennenanlage liegen, aber bekomme außer Premiere alle Sender sauber rein. MeineUCodes sind identisch, allerdings habe ich bei den UCodes bei der Cam-Alpha stehen : cam_01_02_105D.
@beagle : Was für ein Image hast Du verwendet ? Ich habe zum testen das AlexW2x1.6.8 mit den cdkramfs vom 18.02. .
Hoffentlich kann uns jemand helfen, meine bessere Hälfte will die lfd. Abo-Kosten während der Nichtnutzung von meinem Taschengeld abziehen... ;-)
Gruss EMoschi
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
Hallo !
Defintiv habe ich weder Kabel noch eine Kabelkarte, sondern SAT.
Die Phili-Box gibt es doch auch nur als Sat-Box, oder?
Trotzdem wundert es mich mit der falschen Cam-Nummer, denn definitiv habe ich die Datei aus meiner eigenen Software extrahiert und vorher lief es wunderbar ?!
Gruss EMoschi
Defintiv habe ich weder Kabel noch eine Kabelkarte, sondern SAT.
Die Phili-Box gibt es doch auch nur als Sat-Box, oder?
Trotzdem wundert es mich mit der falschen Cam-Nummer, denn definitiv habe ich die Datei aus meiner eigenen Software extrahiert und vorher lief es wunderbar ?!
Gruss EMoschi
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
Nö, Post sehe ich keine 
Im Channel #dbox2 wurde mir geraten, die Box eine halbe Stunde lang auf Premiere Start laufen zu lassen. Sollte dann immer noch kein Empfang möglich sein, bei Premiere anrufen und die Karte nochmal aktivieren lassen.
Meine Karte wurde heute am fühen Nachmittag bereits aktiviert, das kann es also nicht sein. Ich lasse sie jetzt noch ein wenig laufen.
Gruss,
Christof
Im Channel #dbox2 wurde mir geraten, die Box eine halbe Stunde lang auf Premiere Start laufen zu lassen. Sollte dann immer noch kein Empfang möglich sein, bei Premiere anrufen und die Karte nochmal aktivieren lassen.
Meine Karte wurde heute am fühen Nachmittag bereits aktiviert, das kann es also nicht sein. Ich lasse sie jetzt noch ein wenig laufen.
Gruss,
Christof
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
EMoschi hat geschrieben:Hey ?
Schon etwas neues probiert ?
Du hast Post....
Grus Thomas
Noch einer, der beim PM oder eMail verschicken hinterher telefoniert...
Kannst Du das bitte unterlassen? Die Systeme heute zeigen an, wenn eine eMail oder PM neu da ist... Tatsaechlich!
Zuletzt geändert von rasc am Donnerstag 6. März 2003, 18:45, insgesamt 2-mal geändert.
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
Re: @rasc
Es ist nicht gegen die Boardregeln, weil sowas selbstverstaendliches reinschreiben waere IMO gaga...EMoschi hat geschrieben:Sorry,
war keine böse Absicht und kommt auch nicht wieder vor. Allerdings sin die anderen Replys schon raus. Also sory nochmal, wenn es gegen die Boardregeln war.
Grus EMoschi
... ich rechne sowas unter Gehirn einschalten - vor dem tippen...
Nochwas: Bedenkt bitte: Gewisse Software ist (c) - wenn ihr schon Körperflüssigkeiten oder ähnliches austauschen wollt/müsst, dann nicht über das Board.
-
EMoschi
- Neugieriger
- Beiträge: 9
- Registriert: Montag 3. März 2003, 23:04
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
Ich habe gestern nochmal mit meinen Ucodes herumhantiert, neu geflashed, neu extrahiert etc. und hatte dann auch plötzlich Erfolg. Dann liess ich das Gerät ein paar Minuten alleine; als ich wiederkam war die Box wieder abgestürzt und bekam nach dem Booten keinen Premiere Empfang mehr, wie am Tag davor.
Was kann das denn sein?
Gruss,
Christof
Was kann das denn sein?
Gruss,
Christof
-
beagle
- Neugieriger
- Beiträge: 8
- Registriert: Donnerstag 6. März 2003, 10:36
Bootlog
Hier noch mein Bootlog, mit eine wenig "Zapping" hintendran:
ûdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-90.fe.8e.07.00.00-3e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044debug: Got Block #0048debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ - / | \
.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
ûdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-90.fe.8e.07.00.00-3e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044debug: Got Block #0048debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ - / | \.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 2 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird bestraft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:4b:ce
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caEep. Child "timerd.conf" (ino #50) of dir ino #27 doesn't exist!
Using /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
[controld] Boxtype detected: (3)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
[camd] no card is in slot #2
[camd] a card is in slot #1
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP : 192.168.1.25
Netmask : 255.255.255.0
Broadcast: 192.168.1.255
Gateway : 192.168.1.1
Mount 192.168.1.1:/home/media/mp3/ -> /mnt
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
NFS: mount program didn't pass remote address!
mount: Mounting 192.168.1.1:/home/media/mp3/ on /mnt failed: Invalid argument
[neutrino]: NFS mount error: "mount -t nfs 192.168.1.1:/home/media/mp3/ /mnt -o ro,nolock,rsize=8192,soft,udp"
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1431500
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 0012
descramble onid: 0085 sid: 0012 status: 5050
[camd] starting onid 0085 sid 0201avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0201 status: 5050
[camd] starting onid 0085 sid 0204avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0204 status: 5050
jffs2_do_read_inode() on nonexistent ino 50
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conffor reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conffor writing.
[camd] refusing duplicate service
avia_gt_dmx: reloading stc
[camd] refusing duplicate service
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 001bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 001b status: 5050
avia_gt_dmx: queue_data_move: -4 bytes requested, 8 availible
avia_gt_dmx: queue_data_move: 1 bytes requested, 0 availible
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1119500
[sectionsd] filter 0x4e mask 0xfe -> skip sections for table 0x2d
[camd] starting onid 0085 sid 00b6avia_gt_dmx: reloading stc
avia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1431500
[camd] starting onid 0085 sid 001bavia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
descramble onid: 0085 sid: 001b status: 5050
[camd] starting onid 0085 sid 0029
avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0029 status: 5050
[camd] starting onid 0085 sid 0009avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0009 status: 5050
[camd] starting onid 0085 sid 002bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 002b status: 5050
[camd] starting onid 0085 sid 000bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000b status: 5050
[camd] starting onid 0085 sid 000aavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000a status: 5050
[camd] starting onid 0085 sid 0008avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0008 status: 5050
[CFrontend::getEvent] FE_COMPLETION_EV: freq 2092250
avia_gt_dmx: reloading stc
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
avia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
[camd] starting onid 0085 sid 000aavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000a status: 5050
[camd] starting onid 0085 sid 000bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000b status: 5050
[camd] starting onid 0085 sid 002bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 002b status: 5050
[camd] starting onid 0085 sid 0009avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0009 status: 5050
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 001d
descramble onid: 0085 sid: 001d status: 5050
ûdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-90.fe.8e.07.00.00-3e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044debug: Got Block #0048debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ - / | \
.LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
ûdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-90.fe.8e.07.00.00-3e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044debug: Got Block #0048debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ - / | \
.LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 2 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird bestraft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:4b:ce
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caEep. Child "timerd.conf" (ino #50) of dir ino #27 doesn't exist!
Using /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
[controld] Boxtype detected: (3)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
[camd] no card is in slot #2
[camd] a card is in slot #1
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP : 192.168.1.25
Netmask : 255.255.255.0
Broadcast: 192.168.1.255
Gateway : 192.168.1.1
Mount 192.168.1.1:/home/media/mp3/ -> /mnt
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
NFS: mount program didn't pass remote address!
mount: Mounting 192.168.1.1:/home/media/mp3/ on /mnt failed: Invalid argument
[neutrino]: NFS mount error: "mount -t nfs 192.168.1.1:/home/media/mp3/ /mnt -o ro,nolock,rsize=8192,soft,udp"
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1431500
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 0012
descramble onid: 0085 sid: 0012 status: 5050
[camd] starting onid 0085 sid 0201avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0201 status: 5050
[camd] starting onid 0085 sid 0204avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0204 status: 5050
jffs2_do_read_inode() on nonexistent ino 50
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conffor reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conffor writing.
[camd] refusing duplicate service
avia_gt_dmx: reloading stc
[camd] refusing duplicate service
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 001bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 001b status: 5050
avia_gt_dmx: queue_data_move: -4 bytes requested, 8 availible
avia_gt_dmx: queue_data_move: 1 bytes requested, 0 availible
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1119500
[sectionsd] filter 0x4e mask 0xfe -> skip sections for table 0x2d
[camd] starting onid 0085 sid 00b6avia_gt_dmx: reloading stc
avia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1431500
[camd] starting onid 0085 sid 001bavia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
descramble onid: 0085 sid: 001b status: 5050
[camd] starting onid 0085 sid 0029
avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0029 status: 5050
[camd] starting onid 0085 sid 0009avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0009 status: 5050
[camd] starting onid 0085 sid 002bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 002b status: 5050
[camd] starting onid 0085 sid 000bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000b status: 5050
[camd] starting onid 0085 sid 000aavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000a status: 5050
[camd] starting onid 0085 sid 0008avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0008 status: 5050
[CFrontend::getEvent] FE_COMPLETION_EV: freq 2092250
avia_gt_dmx: reloading stc
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
avia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
[camd] starting onid 0085 sid 000aavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000a status: 5050
[camd] starting onid 0085 sid 000bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 000b status: 5050
[camd] starting onid 0085 sid 002bavia_gt_dmx: reloading stc
descramble onid: 0085 sid: 002b status: 5050
[camd] starting onid 0085 sid 0009avia_gt_dmx: reloading stc
descramble onid: 0085 sid: 0009 status: 5050
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 001d
descramble onid: 0085 sid: 001d status: 5050